COORDINATOR OF SERIAL FORCED PX

Similar Questions

• Am forced to cancel their registration Lightroom (from a burnt computer) or buy another serial number

  I had to rebuild my computer and now Lightroom says that I have 30 days to cancel my Lightroom before I can get the serial number to stick to the currently installed Lightroom. This is not normal cannot, given I installed exactly the same version of Windows from a disc cloned new construction?

  Ok. It seems that this has been fixed by Adobe at their end by a simple click. If all goes well, in any case.

• apply coordinator issues

  I am trying to solve a problem with what seems to be that the flow apply Coordinator in Oracle 10.2.0.3.
  
  My layout is a single source database replicating changes to a single destination using a calendar spread over a db link.
  
  The capture of table rules are defined on the source, and there is no propagation or apply defined rules.
  
  It's source DML changes are not replicated to the destination. I think I narrowed down it to messages not passed between the drive to apply it and the server to apply it.
  
  To the reader to apply, Coordinator and the server have SID and #s series, and I see all 3 processes exist on the host computer is the following in the alert log file:
  
  Thu Sep 23 09:30:28 2009
  A001 APPLY flow started with pid = 19, OS = 629 id
  Feed reader apply P000 started with pid = 23 OS id = 631
  Streams apply server started P001 with pid = 28 OS id = 633
  
  V$ STREAMS_APPLY_READER shows the following
  SID, serial: 108, 46
  apply #: 1
  State: DEQUEUE MESSAGES
  out of the total number of messages: 1593
  total messages reversed: 0
  Dequeue number of messages: 39442347
  
  V$ STREAMS_APPLY_COORDINATOR shows the following
  SID, serial: 92, 1490
  apply #: 1
  Status: INACTIVE
  Total applied: 9
  total received: 9
  message from LWM: 33882604
  message from the high water line: 33882604 (Note: the same as lwm)
  
  V$ STREAMS_APPLY_SERVER shows the following
  SID, serial: 104, 3
  apply #: 1
  Status: INACTIVE
  commitscn: 33882604
  assigned total: 9
  total messages applied: 18
  applied the number of messages: 33882604
  
  On the destination he didn't apply errors in DBA_APPLY_ERROR and no problems in the trace and the alert log files.
  
  What else should I look for? Is there the initialization parameters that can cause a server apply not to transmit messages to the Coordinator, or which may cause the Coordinator to 'seize up '?

  If it's a problem of lack of data dictionary, then you see see in the alert.log target the following types of messages:

  knllgobjinfo: MISSING Streams multi-version data dictionary!!!
  knlldmm: gdbnm=PRIMARY
  knlldmm: objn=42345
  knlldmm: objv=1
  knlldmm: scn=280487
  

  It is easily resolved with a DBMS_CAPTURE_ADM. BUILD on the source site.

  Next, you should see some problems, especially for the update and delete as the target tables are not synchronized (they were rollbacked) unless of course there was no activity on the site during the time of the goal to recover. Nevertheless, several counters must match either. You should consider re-instantiate the source and use of the SNA to instantiate re target and be prepared to see in the near future some ORA 1403 whenever the old pass value in the LCR does not match the current value on the site target prior to his change. To force resynchronization without sending all the source tables, you can use for some time DBMS_APPLY_ADM.COMPARE_OLD_VALUES.

• How do force you HTTPS in Safari?

  Safari would there be a way to force HTTPS, as a plug-in, or it do it automatically?

  Not sure about a plug-in to add support for the HTTPS protocol. In other browsers, support

  are automatic and browsers such as Firefox display the possible icons

  see what level of support the browser gives to security on specific sites.

  

  screenshot of Firefox

  Usually, I check manually by adding the HTTPS to a site page to see if it is supported

  and well it does, before she really works. Sometimes this page prefix does not work.

  An example of a site that has or had used a standard http: who had seen the switch

  Mac users to, was a curiosity for me because the site of the company (IMO) should support

  HTTPS. So I tried and found that it did. A few years ago. So, if or when I'm talking about others

  for one such page, where we ask the serial number of product or other info, I try & provide HTTPS.

  example: https://www.powerbookmedic.com/identify-mac-serial.php

  We had usually seen working in standard http, but works in https.

  Some sites do not have a permanent secure (depending on the browser), if the prefix is changed to the of '.

  My first browser of choice is Firefox, saw the old Macs that have unsupported versions of Safari.

  {For my more old use a generation custom PPC of Mozilla Firefox, TenFourFox name.}

  Safari Extensions gallery displays not precisely something HTTPS:

  https://extensions.Apple.com/

  However, I use three different browsers in my more modern OS X in the last Macintosh. Most

  sites that support HTTPS or have their page so addressed, just works. Tests of others to see

  If they actually have a second page that could be safer, can be a different matter.

  In any case good luck!

• Note the serial number of the UUT in the main sequence

  Hello

  I want to write the serial number of the object to be measured on the main sequence.

  I know that I can access this value through RunState.Root.Locals.UUT.SerialNumber. I can write the serial number in this variable and it works as long as the report is not generated on the fly. If activate on the fly to have pointed out, my serial number of UUT report rest to 'NONE '.

  Is it possible to force the regeneration of the report with the last value of variables? I noticed that there's something similar for the runtime. During the execution of the sequence, on-the-fly feature enabled, the report indicates "0 seconds" for the period of performance. However, when execution is complete, this report field is updated with the actual value.

  How to do the same for the serial number?

  Thank you

  Alex

  OK, ATML seems to create the problem. Using XML reports, it works as expected. What is a work around for you?

  Norbert

  EDIT: Classified CAR 491296 against ATML OTF reporting

• Visa OR written closing serial port

  Hi all

  Currently in collaboration with LV2011 and NOR visa 2014.  In my application, I have 7 open including 4 serial ports I write for devices, 3 are simply listening.  Now, I write to 4 of these devices, alternating between them, the second time I try to write to a device, the writing is not received, but when I exit the application and close the port, the message is received. I saw this on 2 similar devices and it is a bit random. Possible, it is a matter of the unit, but I don't see this problem when you use the tera term.  We never seen it before?

  I can post code, but it is a great application and I use the AMC add on.

  Thank you

  Matt

  Using native serial or USB-to-serial adapters ports?  USB adapters often behave in certain circumstances wrong with LabVIEW.

  If he can be a bit of work around the problem, is it possible you can close the reference in LabVIEW just after writing of visa for 'forcing' the message, and then open again the serial port reference?

• I need to control and communicate with a cell - Mecmesin Multitest 2.5 k - via USB/serial - ideas?

  Help!

  I am currently working on a project where I apply force on a hardware - software (non-associated labview) who is provided with the tool (Mecmesin Multitest 2.5 k) allows to control but (of course), I want to control it using LabView, as well as plot data using LabView.

  This issue has developed several years on these forums, but it was never a good answer. I'm suitable for use of LabView for the simplicity of programming (loops, arrays, sorting data etc.), but am a newb in most other respects--unless companies have subVIs!

  The tool is now using a USB-serial connection (PC - end is USB). I think I could use rs232-rs232, but someone in the dept said it still doesn't work, which could mean that the cable series is cheesy. I wish it works however, USB, as ideally something else is connected to the serial port currently.

  Is this possible? If Yes, can anyone help?

  The next step is to open the manual for programming the instrument. Determine the commands that you need to send to the device and to understand how the device sends information. You can use the signs VISA for that test or program such as Hyperterminal. To send something to the instrument, you use an entry VISA (tab ViWrite) and for the data, a VISA read (ViRead).

• Can I buy "product number" by providing "serial number" a hp desktop PC?

  I am a new employee in a company PC repair and troubleshooting. I fixed some PC and documentation for my work forces me to give a record of the product number and serial number to the company. The problem is only, I recorded the serial number of their PC and forgot to note the product number. Is there a a way to get the number of product by providing the serial number of the product on this site?

  The PC model was "HP Compaq dx7400 microtour format" [personal information deleted]

  Never mind. I found it on search to check warranty HP. Computer serial number is confidential information that I have. The model number of the product more like construction and the version of the model that is available publicly.

  Thanks for responding in any case.

• Communication serial port problems

  Hello.  I'm trying to control a pressure controller MKS Instruments 651 via RS - 232 c.  Right now, I just try to establish a basic communication with the device on the serial port.  I can connect to the device with hyperterminal of windows using the following parameters:

  Bits per second: 9600

  Data bits: 8

  Parity: None

  Stop bits: 1

  Flow control: no

  Once I log in, I'm in file--> properties, settings tab and click the button settings ASCII.  I need to check the following boxes (not ticked by default) for communication any occurs:

  Send line ends with line breaks

  The echo locally typed characters

  Add line breaks to incoming line ends

  Force incoming data to 7-bit ASCII

  Once I got it, I can communicate with my device via hyperterminal.  What I want to do now is to use LabVIEW to control the unit, so I need to be able to send and receive data through the connection RS-232 using LabVIEW.  I have been using the basic series write and read vi, but I get no response from my camera.  Looking at the block diagram for the basic reading/writing, I saw that allow termination Char has been wired to false, so I changed to a control and set it to true.  I also changed the termination to a control tank and assign 0xD for the CR.  I can't always get a response from the device.

  I guess I'm still not put in all for the serial port configuration correctly.  Can anyone give me some suggestions on what else to change to match my hyperterminal settings?  Thank you!

  
  

• x 200 Tablet Wacom Serial in Windows 7

  The touchscreen device on our x 200 tablets have been called series Wacom tablet.  Works great under XP.  I'm trying to get a job with Windows 7 now.  The driver of Lenovo's "multitouch" don't work (I don't think that these pills are multitouch anyway) and the driver directly from Wacom results in a BSOD.  "Tablet with pen Wacom Serial" driver apparently comes with Windows 7, because that's where if I manually select a driver.  I had once at forcing work to use this driver, but now after reinstalling again it just says: the device cannot start.  Any ideas?

  
  

• Serial key

  Hello

  Need help as I used to be a Home Basic to windows 7 on my PC. I went and signed up for the free update to win10, but omitted from the waiting list and force the upgrade to 10. The problem started when my hard drive started to act up and had to replace it. I was able to get the serial for windows 10 key, but it does not when I freshly installed it on a new hard drive and the cd key for win 7 does not work as well.

  Should I return first to win7 and migrate from there? When we upgrade to win10, the same license applies to the previous version of the operating system?

  Hello

  Please contact Microsoft Community.

  You must have windows 7 sp1 and windows 8.1 to install the Windows 10 and first windows 7 must be installed and enabled, then you can install the updates of windows 10 widows or file iso windows 10 (perform the upgrade only).

  Iso file Windows 10

  http://www.Microsoft.com/en-us/software-download/Windows10

  You can refer to the link below

  http://Windows.Microsoft.com/en-us/Windows/support#1TC=Windows-10

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Hama black force gamepad is not recognized by windows 7

  Hi all.

  I recently bought hama black force gamepad a d there is no way I can make it work on windows 7. I install the drivers and then connect the game controller to the computer. It seems to recognize him, but the analog/led button is not not work/flashing and does not show on any game setup menu. Can anyone help?

  Hello

  1. the is the problem with other USB (Universal Serial Bus) devices?

  2. do you insert the Hama black force gamepad in the other port of the computer?

  3. do you get an error message?

  Method 1: Perform the steps in the link and check.

  Tips for solving problems of USB devices

  Method 2: If the problem persists, only with Hama black force gamepad, you will need to contact support for assistance.

  http://www.Hama.de/portal/articleid * 142503/action * 2563

  Hope this information helps.

• Is there a way to force the router to re-enroll with to take down the tunnel?

  Hi all

  I have the following configuration:

  Crypto pki trustpoint mycompany.com
  number of registration attempts 5
  retry registration period 3
  Enrollment url http://x.x.x.x:80
  Serial number no
  domain name full routername.mycompany.com
  IP address no
  password
  name of the object l = Denver, c = US
  revocation checking no
  automatic registration of the 70s

  Scenario of

  If the certificate has already reached 70 percent of his time of life and the router has already tried 5 times to get a new failure.

  1. is there a way to know how many times the router tried to re-enroll?

  2. is there a way to force the router to re-register without down tunnels?

  3. If the router has already tried, I can increase auto-enrollment to 90 - would this work?

  Thank you very much in advance for your answers.

  See you soon!

  mguzman4158:

  Question 1

  The following command output may indicate failures of re-registration after that as they occur.

  HQ-edg01 #sh crypto pki timers

  PKI timers
  |  1:59:35.732 2D
  |  2D 1:59:35.732 CRL cannot display the COP
  | 353d 8:31:22.880 SURVIVOR CA.domain.null

  Question 2

  This chapter: setting up registration of certificate for a public key infrastructure

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.PDF

  ... and this chapter: set up and manage a server of Cisco IOS for the deployment of public key infrastructure certificates

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cfg_mng_cert_serv.PDF

  ... from this Book: Guide of the Cisco IOS Security Configuration: connectivity secure, release 12.4 T

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/12_4t/sec_secure_connectivity_12_4t_book.PDF

  .. could help.

  Question 3

  In my opinion, I think that you would be able to revive the reinstatement at a later date by incrementing the percentage argument.

  Best regards
  Mike

• How can I force browsers to log in the website of our company without forcing a change of home page?

  I work in a company of about 250 people, of which most have laptops. Boss wants to know how people plusieurs/who take home systems or their use for other sites (on the road, etc.). However, he wants to spring for the tracking software.

  I asked a solution to the system service tag in the Navigator platform in the registry (HKEY_LOCAL_MACHINE Settings\5.0\User Microsoft Platform) and then change the home page of our site of the company (via GP) so whenever a user opens the browser, it will automatically connect to our page and we can read the serial number in the web logs. Easy, isn't it?
  Unfortunately, we are not having much luck for a few reasons, mainly political. users are not forced or locked up in our site as their homepage and I am not allowed to do so.

  Y at - it somehow I can make a change in the registry in my computers from the company who would say systems to shoot silently a gif or even a non-existent file, so all our machines will be reaching out to our Web site (even in silent mode) and can be connected from anywhere where they are connecting from?

  Could you have a startup program that browser history log copy in a hidden folder, which could be consulted when they connect website or during maintenance of Windows?

  I don't think you could tell the boss to read Dilbert and try not to be as the boss pointed cabbage.  :-)

• Running in parallel DML not forced

  Hello

  I work with an Oracle RDBMS 12cR1,

  I amcurrently how can I influence parallel experimentation DML and parallel DDL (for example edit.

  For example, I have the following settings:

  parallel_degree_level = 100

  parallel_degree_limit = CPU

  parallel_degree_policy = MANUAL

  These are the default values.

  At this point, that means I should be able to influence the optimier through tips.

  There is no statistics on the table I want to insert data.

  I started with:

  ALTER session force parallel dml parallel 4;

  Then I have an insert of type:

  insert into table (list of aliases for column using the dbms_random package)

  Select (column list) of the double

  connect by level < = 100000;

  When I followed the execution using EM, I don't see the parallel expected excution.

  The execution plan looks like this:

  CREATE statement

  load in select

  the gathering optimizer statistics

  connect to without filtering

  double quick

  This isn't a 'great' table and select to insert is not "big".

  If because I have such a '' big, '' set that Oracle chooses not to use parallel DML had?

  How can I force parallel DML execution?

  Thanks and greetings

  Laury wrote:

  Yes, after some further tests, I discovered that connection by does not allow for parallel processing.

  Yet, I do not observe the same kind of results as you.

  Think about how a connect works by, and it must be clear that it would be very difficult to implement a parallel connection by - especially when the driving table has only one row. But you don't really want to use a simple connect by to generate a large amount of data because of the impact this can have on memory.

  Once you've worked out why you do not get the parallelism you should be found - your parallel functions ARE enabled? Your parallel_max_servers is not null (you keep do not answer the question on parallel settings)-you can introduce the strategy who joined a small "connect by" result set to itself and you give the complete end parallelism you need:

  Insert / * + parallel (second_emp, 6) * / into second_emp

  (

  EmpNo,

  Ename,

  employment,

  Bishop.

  HireDate,

  SAL,

  Comm,

  DEPTNO

  )

  with generator as)

  Select

  rownum id

  Of

  Double

  connect

  level<=>

  )

  Select

  round (dbms_random.value (1: 500000)) like empno,

  dbms_random. String name ('U', 10),

  random_job as job,

  random_mgr as Bishop,

  trunc ((sysdate-1000) + dbms_random.value (0.366)) as hiredate.

  round (dbms_random.value (800, 300)) as sal,

  -decode (rounds (dbms_random.value (0, 1401)), 1401, null, rounds (dbms_random.value (0, 1401))) as comm

  (

  case

  When ((dbms_random.value (0, 1401)) round between 1000 and 1401)

  then null

  another round (dbms_random.value (0, 1401))

  end

  ) as Comm.,

  TO_NUMBER ((substr (round (dbms_random.value (10, 30)), 1, 1) |)) '0')) as deptno

  Of

  (select 1 n2 of the generator where id)<= 100)   ="">

  (select 1 n2 of the generator where id)<= 1000)  ="">

  ;

  Note in particular the subquery WITH which will generate a small TWG internally; then the join between two copies of this table - and this join does not use the rownum or operator LEVEL. This gives you a merge join parallel that generates a large amount of data and allows the PX servers make all calls to dbms_random.

  ----------------------------------------------------------------------------------------------------------------------------------------------

  | ID | Operation | Name                      | Lines | Bytes | Cost (% CPU). Time |    TQ | IN-OUT | PQ Distrib.

  ----------------------------------------------------------------------------------------------------------------------------------------------

  |   0 | INSERT STATEMENT.                           |       |       |     7 (100) |          |        |      |            |

  |   1.  TRANSFORMATION OF THE TEMPORARY TABLE.                           |       |       |            |          |        |      |            |

  |   2.   LOAD SELECT ACE |                           |       |       |            |          |        |      |            |

  |   3.    COUNT                            |                           |       |       |            |          |        |      |            |

  |   4.     CONNECT TO WITHOUT FILTERING.                           |       |       |            |          |        |      |            |

  |   5.      QUICK DOUBLE |                           |     1.       |     2 (0) | 00:00:01 |        |      |            |

  |   6.   COORDINATOR OF PX |                           |       |       |            |          |        |      |            |

  |   7.    PX SEND QC (RANDOM). : TQ10001 |     1.    26.     5 (0) | 00:00:01 |  Q1, 01 | P-> S | QC (RAND) |

  |   8.     LOAD SELECT ACE (HYBRID TSM/HWMB) |                           |       |       |            |          |  Q1, 01 | SVCP |            |

  |   9.      OPTIMIZER STATISTICS COLLECTION |                           |     1.    26.     5 (0) | 00:00:01 |  Q1, 01 | SVCP |            |

  |  10.       THE CARTESIAN MERGE JOIN.                           |     1.    26.     5 (0) | 00:00:01 |  Q1, 01 | SVCP |            |

  |  11.        RECEIVE PX |                           |     1.    13.     2 (0) | 00:00:01 |  Q1, 01 | SVCP |            |

  |  12.         PX SEND BROADCAST | : TQ10000 |     1.    13.     2 (0) | 00:00:01 |  Q1 00 | P-> P | BROADCAST |

  | * 13 |          VIEW                       |                           |     1.    13.     2 (0) | 00:00:01 |  Q1 00 | SVCP |            |

  |  14.           ITERATOR BLOCK PX |                           |     1.    13.     2 (0) | 00:00:01 |  Q1 00 | ISSUE |            |

  | * 15 |            TABLE ACCESS FULL | SYS_TEMP_0FD9D66BC_3BA6C3 |     1.    13.     2 (0) | 00:00:01 |  Q1 00 | SVCP |            |

  |  16.        KIND OF BUFFER.                           |     1.    13.     5 (0) | 00:00:01 |  Q1, 01 | SVCP |            |

  | * 17.         VIEW                        |                           |     1.    13.            |          |  Q1, 01 | SVCP |            |

  |  18.          ITERATOR BLOCK PX |                           |     1.    13.     2 (0) | 00:00:01 |  Q1, 01 | ISSUE |            |

  | * 19.           TABLE ACCESS FULL | SYS_TEMP_0FD9D66BC_3BA6C3 |     1.    13.     2 (0) | 00:00:01 |  Q1, 01 | SVCP |            |

  ----------------------------------------------------------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  13 - filter ("ID"<>

  15 - access(:Z>=:Z AND:Z)<>

  17 - filter ("ID"<>

  19 - access(:Z>=:Z AND:Z)<>

  Concerning

  Jonathan Lewis