Copies are generating losses?
Adobe Photoshop is the most advanced software in the world, therefore.
I have in mind that has it, the loss of quality is low, for example:
Open a photo (original) < save < close.
Re-open the same image (copy) < re-record < close.
Repeat the foregoing said two thousand times more.
- Can I keep the lossless picture, even after repeatedly copy?
- If it is possible, what form (this output configuration) can I get it?
Hello
If you want to say it again:
Re-open the same image (copy)< resave=""><>
Repeat the foregoing said two thousand times more.
None of these settings will make a difference. When you save in Jpeg format, it should be final (one-shot deal).
If you want to (say) different from cropping the image, you need to boot from the original. It may be a .jpg file, .psd, .tiff or your RAW file.
Again, I still not understand why you must do this!
Stone
Tags: Photoshop
Similar Questions
-
My copies are always striated when I print from the ADF
When I use my driver on my 8500 AIO, copies are seeded, but agreed when I use the scanner glass, the copies come out well. I tried to clean the feeder, but I was unable to get rid of the streaks. I used alcohol to friction on the rubber rollers and used compressed gas (spray cleaner) to try out any dirt. Any suggestions on how to solve this problem are greatly appreciated
Hi TomCliff,
Follow the steps described in this document and make sure that there are no scratches or chips in the glass of the scanner to the ADF.
-
I have a HP Officejet 6500 has more. It allows to print and scan but the copies are to come in white.
Hey, here's a link for y our question, it says empty and white scans copies, but it breaks down in their own separate headings, here is the link: http://support.hp.com/us-en/document/c03111687
If that does not help the problem, a sequel to the above listed link I would do a hard rest is: while the printer is on, pull on the power cord to the printer and the wall. After 30 seconds reconnect power to the wall and printer. This will trigger a 'dirty power upwards' and restoring the printer to a State well known (if possible). No user settings are lost with a "hard reset." I'm pulling directly the instructions for this process of a hardware instruction guide. I'm sticking to it would have shown here Word for Word. I hope this helps
-
Deskjet HP 1050 printer. SR No.14232 YMO
Windows XP operating system
Copies are darker than the original, and the whites are a light gray shadow
Any changes made to the printer
- Try to do a power drain
- If this does not work, uninstall and reinstall the software of the printer control panel
-
New archives are generated with 640 causing permission extracted from abend
Hi all
We have configured the normal extraction process (not ALO). But whenever from trying to read archives abends with error permission denied archiving log.
We noticed that the newly created archives are courtesy of 640. We do not use the user oracle to GG, we have created different user OS for GoldenGate. We changed the permissions on the mountpoint of archives but the ancient archives only modified permissions and not the archives newly generated.
GoldenGate OS user cannot be group DBA as company policy allows for no do. Default umask is 022
The 10.2.0.4 basic version
OGG version 11.2
Any help will be really appreciated. Just that the archives are generated with 644 permissions.
Thank you and best regards.
Trush.
This is a default permissions by oracle internally and cannot be changed. Therefore, the solutions are,
1 schedule a cron task to change permissions.
2. Add the OS GG group DBA user.
Thank you
-
Virtual copies are stored in the backups? How can I insert a backup in an existing catalog
I deleted a tif image file that I didn't intend, which had several virtual copies of LR, created from it. Virtual copies had a lot of history important that my impression of the preparation of changes to the document. These virtual copies are saved in the LR backup?
If so, how can I insert in the catalog that I use? I did a lot of changes in the two days since my last backup and don't want to lose this story either. Are you suggesting that I do a backup current prior to extraction of files since I last saved? I know I'm supposed to go to the backup location and open the last backup, but how work with the work during the last 2 days?
Any help would be most appreciated. Thank you, TomHuff says:
This may have been a mistake
It was, but not catastrophic.
Photos in Lightroom are defined by a database ID, not a file name, so you cannot rename them in order to be considered of the same picture as before.
So, theoretically, if master and virtual copy pictures are in your backup, you should be able to import all of them (copies of masters and virtual) - make sure that you remove first did re-imported in your catalog and make sure the name of the source file for tif on disc is identical to the front.
Huff says:
- The section has new Photos, which gives 2 choices of file manipulation: a) add new pictures to the catalog without moving them or b) not to import new photos
- Replacement of A changed existing pictures of the article with 2 options: a) nothing or metadata (b) and develop the power only. If you choose this option you can check a box to preserve old settings as a virtual copy.
1. a) add without moving
2. I thought you were only to add backup photos which no longer exist in the catalog (current) target, in which case it should be no replacement.
R
-
OfficeJet Pro 8600: Officejet Pro 8600 copies are almost completely black
Copies of the Officejet Pro 8600 are almost completely black. The party central - perhaps an ich in width - is somewhat readable. Printed documents are okay. This printer is 2.5 years old and worked fine in what concerns all the until today. Thank you.
Hello @Tim1943 and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you use in the copy output problems. I would like to help!
I would recommend starting with a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
I suggest you then plug the power to the printer into a different wall outlet.
Another recommendation would be updated the firmware of the printer:
Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!
-
I don't want to make copies, which I already have, I want to get out in addition to the memory stick of mnving content in a portable hard drive permanently. My photos are totally assembled in 3 different places in my windows computer (not my fault) Photo Gallery, I don't want the images there are... My collection is private. Picasa collects all the photos again. I want the originals stored for future use in a hard drive laptop or on disks.
I do not use the photo gallery, you just need a viewer to open the pix.
Also, I don't know why you get 4 copies. Some libraries can be deleted if you do not use. I don't remember those that can be deleted, so you'll just to test.
If I understand correctly: create a folder for the original user and another for the edited pix. After you have moved the pix on the flash drive, you can delete the content of this file and it is there and empty for the next round of pix.
-
Percentage change customer Bill Split after the invoices are generated
Hi all
We have a situation where a project was created with the customer A view 100% contribution and ter customer - 0% contribution. The professional user intended to change the distribution of the invoice and customer B has 100% Contribution and client have 0% Contribution. However, this is not respected, and bills have been raised and revenue recognized for this project. It was discovered while the percentage of distribution of Bill was not correct. Now, the split of the Bill cannot be changed from the application (front-end server) - the field is not update-able and also client B can be seen on the screen.
Professional users have mentioned that they are capable of-
1. disable extensions of billing
2. Enter the negative events to put receipts and invoice at zero
3 run the recipes and process as requires it invoice
The amount of customer Bill Split on the project must now be changed. How can this be changed?
Percentage of customer Bill Split (contribution) can be changed by a script of the database update or is there an API for it?
Concerning
Vivek
Hi all
I discovered later that this is not possible when the project entered and transactional (revenue generated or invoice is created).
See document for more details
How to change the customer or the percentage Contribution of customer sharing on a project with spending or invoices (Doc ID 149127.1)
-
Dear community,
I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.
At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.
When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.
What should I do also virtual copies get synchronized?
Thank you very mich for your support.
Best regards
Peter
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.
As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.
Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.
-
Why 3 queries are generated during the execution of a report?
Hi all
I am in support of HIS production team. Currently, I am curious to know that why 3 requests are get generated in the Siebel analytic server log while I run a pivot report in response?
Can someone explain it? Is there any problem with the DR. himself?
Thank you
NathalieUsually, I had seen that it's expected behaviour. Your probably see a query for the table, one for totals (assuming that they are turned on) and one for the backbone. Basically, when the BI server may not run all in one statement, you see several instructions and a "stich" performed in memory, the idea is its shipping as much treatment as possible db - generally that it is more efficient to perform operations in memory on the server in OBIEE.
-
How the resets are generated in LabVIEW for FlexRIO
All,
My background is VHDL and Verilog for FPGA and ASIC implementations. I guess LabVIEW has a point, an only synchronous reset to all of its logic. I create a design that is going to be sections of VHDL IP, through IP integration node is instantiated. When writing to the top of my spec, I need to describe how a reset is spread to all the flops in the design that will be peer-reviewed of accuracy of the results. I need to understand exactly how LabVIEW handles resets to other areas of the clock.
A simple case is the following: I have a 50 MHz external source synchronous data interface and will be a limited treatment of data in this area of 50 MHz using an IP integration node. This IP is designed to have the flops to reset synchronous on the 50 MHz clock.
Separately, I have my most of my treatment and storage to the host (via DMA FIFO) in a field of 100 MHz clock, derived from the clock of 40 MHz I base I must transfer data from 50 MHz to 100 MHz using a FIFO. This treatment at 100 MHz contains a floating-point operations that are reset to zero synchronously to the field of 100 MHz.
In this scenario, you see I have two areas of clock with synchronous resets. I need to understand how LabVIEW FPGA create reset signals which are entries to my integration IP nodes, in order to understand if I need to incorporate any reset synchronization within my VHDL circuits.
Thanks for any help and if you need further details or context, please let me know and I find out additional details.
-Jim
Hey Jim,.
So, option 2 then... in this case, you are looking at a signal of asynchronous reset and must realize in your VHDL similar to the following to ensure that your resets are say synchronously.
-
My previews are generated w / Aliasing... Is this normal?
Hey everybody,
I'm working on a project of kinetic typography and while I work, I notice that all of my insights (both in the RAM Preview) and normal have aliasing on the edges of the letters... of course, it cannot exist in the final video.
Is this normal for After Effects or will it output w / aliasing? The continuously rasterize button is enabled for all layers (also, how turn it power?) I guess it's on b/c, the icon is there and not empty because I think if it's stop).
I know that my machine is not the greatest for After Effects... that is the problem? If so, will it be fixed on rendering? Is there a way I can make more high quality, even if it takes a super long time?
AMD Phenom II x 4 840 (3.2 GHz)
EVGA GTX 550 Ti
8GB Corsair Vengeance 1600 MHz
MSI 870 - G45
HARD DRIVE 160 GB 2.5 "7200 RPM
Thanks for the time.
Are you overview the magnification/zoom to 100%?
You have the Zoom quality more precise value preference?
http://helpx.Adobe.com/after-effects/using/previewing.html#viewer_quality_preferences
Have you tried a test for output quality rendering?
-
Totals based on values that are generated by the formula in the column
For a report of historic opportunity, we have made a new column that generates a value (the type of contract) by the calculation of the duration of the contract. For example "Short term" (less than 12 months) or "Long term" (over 3 years). We do this by the CASE statement. Now, we want to have an overview by country of the number of possibilities of "short-term" contract, the number of contract opportunities 'Long term' etc. However, it seems that we can not display the metric of opportunity 'number of possibilities' as a total according to the result of the column that shows the type of contract. Someone knows how to fix this?Create another column and use the formula Count (possibility." The opportunity ID").
Once you create this form - use a pivot and view the results
-
I tried realigning the paper, but the problem persists
Generally, this is caused by rollers Sales. The document below should help you to solve the problem. If this does not help, you will need to replace the printer.
Maybe you are looking for
-
Cookie exceptions change spontaneously.
In the privacy in the Options tab, the checkbox to accept cookies from sites is disabled. I pressed the button Exceptions and added many websites to accept cookies and you click on allow for Session on each of them. Sometimes I go to a site where I n
-
This HP model is: Pavilion a530e. It crashed and the original CD is not on this earth. I installed a generic copy of Windows XP Edition family (the same as the original OS, but different SP level). I left the empty product key because it would not
-
Example: батарея
The battery is dead! After replacement on the news and the controls on how to tune, gives out that battery not the worker must also urgent replacement. How can it be a problem? (the battery is new, it is purchased in specialty store, he is responsibl
-
I CHANGED MY OS TO VISTA 64-BIT FOR XP BUT THE PROBLEM IS AUDIO IS NOT WORKING AND UNABLE TO FIX THE CHIPSET SOFTWARE
-
Dell PowerEdge T320 does not start
Hello Customers told Dell T320 server that no longer starts. He said that he tired to update firmware iDrac, but after restart server could not start. Server initializes the memory and starts initialization of iDrac, stays there for a few minutes, gi