OfficeJet Pro 8600: Officejet Pro 8600 copies are almost completely black
Copies of the Officejet Pro 8600 are almost completely black. The party central - perhaps an ich in width - is somewhat readable. Printed documents are okay. This printer is 2.5 years old and worked fine in what concerns all the until today. Thank you.
Hello @Tim1943 and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you use in the copy output problems. I would like to help!
I would recommend starting with a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
I suggest you then plug the power to the printer into a different wall outlet.
Another recommendation would be updated the firmware of the printer:
Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!
Tags: HP Printers
Similar Questions
-
OfficeJet Pro 8600: copies too light
Everything works fine, but all of a sudden my copies are MEDIUM to light! The printer works just fine, but when I go to copy something that you can hardly find out more about the darkest setting. I have run diagnostics and it says everything is working fine and I cleaned the screen, etc. manually and it cleans the computer.
Hey @Ray1959,
Welcome to the Forums of HP Support!
I understand that the e-all-in-one printer Officejet Pro 8600 is copy slightly. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once, while the printer is on, remove the power cord at the back of the printer for one minute.
Please let me know if this improves the darkness of the copies. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
OfficeJet pro 8600 print a single vertical black line when using the charger
OfficeJet pro 8600 print a single vertical black line when using the charger
Hi @realestatejeann,
I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.
Vertical stripes, lines or streaks on Copies, faxes or scans.
If you need help, let me know.
Good day!
Thank you. -
OfficeJet Pro L7590 - printer skips print complete lines of black ink intermittently.
My Officejet Pro keeps intermittently jump lines of black ink when I copy or print a document. There seems to only be no trend as to where on a page, the line jumps from print. When initially, I replaced my B/Y printhead, the problem seems to have stopped and the pages seem to be printing OK. But after a day or two, when I want to print or copy another document, the problem reappears. I also replaced the black cartridge (twice), the problem still exists.
I love this printer because, when he's not working, it prints and copies of documents with excellent speed and clarity. I don't want to spend another $ 200 dollars for a replacement HP printer or an excessive amount for the repair of the existing printer. Any suggestions?
HI - try after the steps described in this document (if you haven't already done so). It should help narrow down the issue.
Hope that helps.
-
I have a HP Officejet 6500 has more. It allows to print and scan but the copies are to come in white.
Hey, here's a link for y our question, it says empty and white scans copies, but it breaks down in their own separate headings, here is the link: http://support.hp.com/us-en/document/c03111687
If that does not help the problem, a sequel to the above listed link I would do a hard rest is: while the printer is on, pull on the power cord to the printer and the wall. After 30 seconds reconnect power to the wall and printer. This will trigger a 'dirty power upwards' and restoring the printer to a State well known (if possible). No user settings are lost with a "hard reset." I'm pulling directly the instructions for this process of a hardware instruction guide. I'm sticking to it would have shown here Word for Word. I hope this helps
-
MacBook pro retina display (mid-2012) goes black
All by using the computer to randomly screen goes completely black. After a few attempts at tapping trackpad or a bite or two, screen turns on but then log on to the computer. Program I was running is still there and continues on. It is very random and I fear that a logic board or the video card component may be out. MacBook Pro retina display mid-2012, 16 GB 1600 mHz DDR3 RAM, graphics NVIDIA GeForce GT 1024Mo of 650M; 2.6 i7 running OS 10.11.2
Hi James,
Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. I'm a bit ambiguous on the screen exactly who you see when you log in, but according to your description it looks that your computer may be involuntarily go to sleep. If this is the case, you can find the troubleshooting steps in the following article useful:
If your Mac does not sleep or wake up when expected - Apple supports
As mentioned in this article, another possibility on laptops like the MacBook Pro is that the screen closed sensor may be triggered unintentionally. There is a small magnetic sensor in portable computers and sometimes, being close to things like briefcases magnetic closure or magnetic jewelry can cause him to think that the display was closed, which then puts the machine in a locked sleep state. If possible, you can test the issue on an office open without any potential source of interference.
Magnets in devices could cause sleep your Mac computer - Apple Support
See you soon
-
My copies are always striated when I print from the ADF
When I use my driver on my 8500 AIO, copies are seeded, but agreed when I use the scanner glass, the copies come out well. I tried to clean the feeder, but I was unable to get rid of the streaks. I used alcohol to friction on the rubber rollers and used compressed gas (spray cleaner) to try out any dirt. Any suggestions on how to solve this problem are greatly appreciated
Hi TomCliff,
Follow the steps described in this document and make sure that there are no scratches or chips in the glass of the scanner to the ADF.
-
. HP Officejet 6500 E710n-z won't print BLACK
HP Officejet 6500 E710n-z won't print BLACK usining Excel 2007. I don't think it's a clean printer, but was jump there ' All could have at least a direction for a fix or solution
Win7 full cartahers printing.
Thanks for the reply with more information.
what you did may limit the possible cause. at least we know that this problem is caused by excel, below is a workaround solution that you can try:
Looking at the 'Print Preview', confirms is the black appear or not.
More top issue will be useful for further refinement.
Copy / paste from the old file by excellent:
1. create a new excel file
2 paste special
3 'text' only
4 repeat the format will help.
-
Deskjet HP 1050 printer. SR No.14232 YMO
Windows XP operating system
Copies are darker than the original, and the whites are a light gray shadow
Any changes made to the printer
- Try to do a power drain
- If this does not work, uninstall and reinstall the software of the printer control panel
-
Virtual copies are stored in the backups? How can I insert a backup in an existing catalog
I deleted a tif image file that I didn't intend, which had several virtual copies of LR, created from it. Virtual copies had a lot of history important that my impression of the preparation of changes to the document. These virtual copies are saved in the LR backup?
If so, how can I insert in the catalog that I use? I did a lot of changes in the two days since my last backup and don't want to lose this story either. Are you suggesting that I do a backup current prior to extraction of files since I last saved? I know I'm supposed to go to the backup location and open the last backup, but how work with the work during the last 2 days?
Any help would be most appreciated. Thank you, TomHuff says:
This may have been a mistake
It was, but not catastrophic.
Photos in Lightroom are defined by a database ID, not a file name, so you cannot rename them in order to be considered of the same picture as before.
So, theoretically, if master and virtual copy pictures are in your backup, you should be able to import all of them (copies of masters and virtual) - make sure that you remove first did re-imported in your catalog and make sure the name of the source file for tif on disc is identical to the front.
Huff says:
- The section has new Photos, which gives 2 choices of file manipulation: a) add new pictures to the catalog without moving them or b) not to import new photos
- Replacement of A changed existing pictures of the article with 2 options: a) nothing or metadata (b) and develop the power only. If you choose this option you can check a box to preserve old settings as a virtual copy.
1. a) add without moving
2. I thought you were only to add backup photos which no longer exist in the catalog (current) target, in which case it should be no replacement.
R
-
No backgrounds, text fields, text, borders areas. All-black text, all the blue links. Any stylesheet or layout on all internet pages of setting shaped. Just randomly. I uninstalled, rebooted, re installed. Nothing solves this problem.
This problem has been fixed by uninstalling Google Earth for some reason any it messes up Firefox when I install it.
-
I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?
Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?
-
I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.
Hello
Use it as the last command in the file beats.
OUTPUT
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When I import my photos into lightroom, the images are completely black, so I can only see the image in the browser. How can I solve this?
Go to Lightroom preferences
Click the performance tab
Deselect the graphics processor
Restart Lightroom
Kind regards
~ Mohit
-
Since the Windows 10 update, Adobe Reader XI and Microsoft Edge forms are not complete when opening a Web site. Why should I register to my computer before can fill them?
Hi kay3452,
Microsoft Edge is not compatible with the Acrobat/Reader plugins. Please try other web browsers.
Kind regards
Nicos
Maybe you are looking for
-
iGoogle costantly redirects and does not open why? Cookies are ok.
Whenever I have enter igoogle in the address box or click on igoogle in the bookmark bar a box appears with a message stating, redirected, don't try it yet as it will not work or words to that effect. How do I access igoogle? Tracking cookie are not
-
Why approximately 100 users have been added to my server - which are all of type system
I'm under Server 5.0.15 on El Capitan 10.11.3. I looked at my list of users today and about 100 user of the system have been added which were not a few days ago. They are safe or should I worry and try to get rid of them. Some examples are: Non pri
-
Teclado there mouse inalambricos
Nations United understanding put me of teclado there mouse inalambrico y aunque dicen ser Plug-and-Play, no he could do than funcionen. That hacer debo the referencia are without WIRELESS 3000 Microsoft Gracias
-
Stuttering playback of mono ogg-vorbis files
Hi all I recently bought a Sansa Clip 4 GB and updated to the latest firmware (v02.01.32a). I am happy to use obb-vorbis files, but have met stuttering playback when you listen to mono ogg-vorbis files. In particular I listen to an audiobook on libri
-
HP LaserJet Pro M201dw: Language must change to HP LaserJet Pro M201dw
I have a HP LaserJet Pro M201dw and I need the language has changed from Italian to English Could you please send the link for the fix. Thank you