Copy a duplicate symbol acts

Similar Questions

• cRIO LVRT duplicate symbol

  I created a cRIO system I duplicated and tried to run it on a second system of cRIO.  It seems that there are questions for the cRIO LVRT start.

  The Console Out Bootlog is PARTIALLY set here...

  What would be the cause of all these "duplicate symbol: 'errors?"

  I will be to reinstall the software on the controller and will let you know if it solves the problem - I was curious about these errors.

  Bootlog copied and pasted below - it's only a small fraction of the duplicate symbol errors that were returned.

  cRIO-907 x Boot

  Copyright 2007 National Instruments Corp.

  Bootrom version: 2.4.7
  Date of creation: July 9, 2007, 00:45:07

  Press a button to stop Auto-start...
  1
  0

  self-priming...

  boot device: task force = 0, 0
  Unit number: 0
  Processor number: 0
  host name: Home
  file name: / c/nor-rt/system/vxWorks
  flags (f): 0 x 8

  Special Assembly team...
  Attached to TASK force... Datalight Reliance v3.00.1218T
  Edition of VxWorks ppc603
  Copyright (c) 2003-2007 Datalight, Inc..
  fact.
  3554816
  Starting 0x100000...

  Device ATA not detected.

  Autonomous 8332 symbols added.
  On board storage medium...
  Datalight Reliance v3.00.1218T
  Edition of VxWorks ppc603
  Copyright (c) 2003-2007 Datalight, Inc..

  -> lvusEngine: PPC603 detected CPU...
  Check CPU frequency: 32,999923 MHz [use: 1000 MHz]
  MAX system identification name: NOR-cRIO9074-0140DD3B
  The initialization of the network... Assigned static IP address.
  Device 1 - MAC address: 00:80:2F:11:9 A: 7 D - 134.194.105.181 (primary)
  Unit 2 - MAC address: 00:80:2F:11:9 A: 7th - 0.0.0.0 (secondary)

  Loading LVRT...
  Duplicate symbol: "LedInput' ni_emb.out module loading
  Duplicate symbol: "IPResetEnabled' ni_emb.out module loading
  Duplicate symbol: "GetFileSystemType' ni_emb.out module loading
  Duplicate symbol: "GetHighResTimestamp' ni_emb.out module loading
  Duplicate symbol: "GetPrimaryIPAddress' ni_emb.out module loading
  Duplicate symbol: "getOSVersionString' ni_emb.out module loading
  Duplicate symbol: "LoadStartupLibraries' ni_emb.out module loading
  Duplicate symbol: "LabVIEWRTDoneBooting' ni_emb.out module loading
  Duplicate symbol: "StatusLedInput' ni_emb.out module loading
  Duplicate symbol: "SerialRedirectEnabled' ni_emb.out module loading
  Duplicate symbol: "RebootSystem' ni_emb.out module loading
  Duplicate symbol: "CheckReliance' ni_emb.out module loading
  Duplicate symbol: "SafeModeEnabled' ni_emb.out module loading
  Duplicate symbol: "LoadEarlyStartupLibraries' ni_emb.out module loading
  Duplicate symbol: "ThreadTimeCounterUnInit' ni_emb.out module loading
  Duplicate symbol: "InitRDTSC' ni_emb.out module loading
  Duplicate symbol: "UserSwitchInput' ni_emb.out module loading
  Duplicate symbol: "CPULoadMonitorInit' ni_emb.out module loading
  Duplicate symbol: "PrintStringToConsole' ni_emb.out module loading
  Duplicate symbol: "NoAppEnabled' ni_emb.out module loading
  Duplicate symbol: "SystemSwitchInput' ni_emb.out module loading
  Duplicate symbol: "GetTargetID' ni_emb.out module loading
  Duplicate symbol: "GetNumCPUs' ni_emb.out module loading
  Duplicate symbol: "GetHighResTimestampFreq' ni_emb.out module loading
  Duplicate symbol: "LedOutput' ni_emb.out module loading
  Duplicate symbol: "GetCPULoad' ni_emb.out module loading

  VxWorks is when loading that connects that means all global functions and variables are placed in a symbol table when the library is loaded.  If a symbol name already exists in the table of symbols then the warning "Duplicate symbol" will be generated.  For more information, see http://www-cdfonline.fnal.gov/daq/computing/vxworks/symbol_table.htm.

  My guess is that somehow a binary file is loaded for the second time, the controller implementation in form and re - install the software should solve this problem but I would like to know if it isn't.

  Sebastian

• How can you easily swap palette animations without too much duplicate symbols?

  This is to be exported in a film, so not a matter of Actionscript.

  I do a parody of a fighter game scenario.  A character like Subzero and the other as Scorpion.  They are the same models, but we need to be colored differently.  They are composed of symbols such as the arms and legs to make a greater animation of characters in all.  There are several animations of them, kicked, punched, shaky shots, etc.  Now, I know that if I went and edited the colors, that all instances would change accordingly.  Duplicate symbol does not work because they share the same internal symbols.  Is there a method for breeding "deep"?  I go about it the wrong way?  A tint does not work, because essentially, I want to just change the color of some components.

  create two torsos or copy the vest and neck movieclips to each character of movieclip (instead of using a shirtless movieclip to each character).  If you do the later, each character can have a color different vest/neck.

• How do I go to make a copy of a symbol without affecting the instance?

  Hello everyone, I have a symbol that I've used and I would like to use the same symbol in another image (s), except that when I change the symbol of the original edits too, for example if I delete a part of it, it removes also in the object that I already placed, I tried the method of "duplicate symbol" but nevertheless my symbol always is changed and changing the way I want it to show it in some frames. Any help will be appreciated.

  If you have a symbol with a few internal symbols (Movieclip), then it should also duplicate. to do this, copy the symbol and paste it into a new file and rename everything in the library. After all, rename, copy and paste the symbol of the new file to your file. It's her!

• copy or duplicate in sharing files cannot point

  IM currently on 5.0.15 Server with OSX 10.11.3 3 computers (clients) on OSX 10.11.5 and have found that they can not copy or duplicate in sharing files to point to the server. When you attempt to reproduce or copy a file you get the following message "unable to connect to the server because the name or password is incorrect." However copy on another share point is fine. Just won't work in this share point. Moving the file is fine. Any other Client computers are on OSX 10.11.4 or lower do not experience this problem. Should I update it with OS and App Server and hope that this question will far more recent?  Thank you

  I just checked using the latest version of the Server 5.1.5 and client OS X 10.11.5. and duplication and copying files works very well for the actions of the SMB and AFP.

  If you have only tested using higher level, create a folder and see if the problem occurs when you are working on files inside this folder. If it isn't, then you have your bad permissions/ownership/ACL on the server. You should check the ACL as well as Posix ownership and permissions.

  Also, try to remove the part in the sharing Panel and then Server to add it again.

  C.

• iMovie does not copy or duplicate

  iMovie does not copy or duplicate. No idea why? I press the option in projects, and nothing happens.

  It only happens in big movies (20 GB of files). Small films seem ok. There is no wheel of progress in the upper right and the players (tried more than one) have enough space.

  It's as if the computer does not take into account my request.

  I could just backup in other words files ('show in finder' and copy it manually), but think that there must be a solution to this.

  If it's just for a backup, simply copy the entire library on an external device.

  Geoff.

• How can I active names change for images exchanged in duplicate symbols?

  I have what seems to be a bug in cc2014 driven on-Board under the following circumstances:

  1 duplicate a symbol

  2. drag the symbol duplicated on stage.4

  3 Rename the symbol

  4. Click to edit the symbol

  5. Select an image inside the symbol

  6. in the properties panel, change to reverse the image to use for this instance of the duplicate symbol (I need to reuse this symbol several times and not being is not able to change active names is a real problem!).

  7 names for the asset in the chronology and elements was automatically generated at the time of the duplication when trying to change the names they go back to the auto-generated name.

  How can I overcome this problem, which is clearly a bug or an evil thought thanks to some highly competent programming by another adobe edge animate tesm

  I thank in advance

  David.

  You can assign IDS and classes of symbols with attr ('id', 'newIDName') and addClass().

  So let's say I have a symbol that contains other symbols - I had to first give an id to the outermost symbol, then drill down to other internal symbols. So since I can remedy directly, then I can do what I want with them.

  When I want to create several symbols, then I run a loop so that they have the same name with an index.  Here, I'm not add an id to the internals, but you could use the same principle. You can also assign names of classes.

  example:

  create buttons in a div. navigation bar

  for (m = 0; m<>

  var buttons = sym.createChildSymbol ("button", "navBar");

  Buttons.Element.attr ("ID", "Button" + m);

  SYM. $("#button" + m) .css ({'position': 'absolute', 'top': 5, 'left': (distance += 50)});   Make sure you have the # in front of the name of the new

  sym.getSymbol("#button"+m).$('bg').css ({'background-color':'white'});})

  sym.getSymbol("#button"+m).$('number').html (m + 1);

  };

• How can I copy images duplicate in a collection on another drive.

  I store my images on an external drive.  I have Lightroom on my MacBook Air. I have 40 images in a collection and I would like to copy/duplicate these images on the internal drive of my MB Air so that I can show someone.  How can I do this using Lightroom.  The images in the collection are a large file in the catalog and it would be boringly kludgy to search for the name of each image and use the Mac Finder to copy to the MB Air.

  Help!

  Thanks, Paul

  In Lightroom, select all the images desired and use file-> Export and select a destination on the internal hard drive

• Is it possible to copy or duplicate a file in the cloud?

  I have an iPhone and the application has no functionality of copying files. I can rename, move, and delete a file. I want to use a single file with editable as a templete fields and create additional files from that. The only way possible, I've found is to keep open the file sent to me and save this file on the cloud.

  Adobe Acrobat DC can duplicate documents. Read the help.

• Copy or duplicate virtual machines

  I installed ESXi 3.5 and I use VMware Infrastructure Client to manage.

  How can I copy/duplicate existing virtual machines the simplest and fastest way?

  I tried to copy files between folders, but the server hanging, so I presume that there is a better way...

  Concerning

  Marius

  Simplest is to clone virtual machines, but this feature is not available in free ESXi, you have vCenter.

  So I guess the only way is to use FastSCP (free tool), download power power VM off to your office and new different directory. Then right click on .vmx datastore browser and "add to the inventory.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• When the copy of my symbols between projects lose their source file after the backup

  Hey,.

  This is my first post here, but I have been struggling with this for a while and have not been able to find a similar position again. So I use Windows 7 and Flash CS 5.5.
  I'm animated short episodes of an animated mini series, with several characters. Our character symbols or organized in folders and then these files are copied to the front she draws from the previous episode at the library of the next episode.

  However, as soon as I save the file all the symbols will empty. Under the symbol properties, they have no source file. The source file disappears. I can re-link but these symbol libraries have more than 100 symbols.

  This only happens to the symbols, I have not placed on the time line yet, but it becomes tedious to hunt endlessly through old projects of re - link or copy symbols that have disappeared.

  My question is why what is happening, and how to avoid it?

  Yes, I think it's a path problem.

  Because you can't have two files with exactly the same name, do a copy/paste changes this way. OK... then how can we cheat/fool Flash using the same path (sort of) for two different folders?

  Thinking about support: you can do tests on a small scale... not the whole project?

  Can you CUT and paste and the destination folder works?

  Use the same folder for both libraries? and the path of the folder root... kinda like an address absolute, but relative to root? This must be done when you make all of the symbols of origin.

  Change the location of each folder in library of sections so that they are not in the same main folder so that you can use the same name of subfolder in the folder of each section? For example:

  section1_library/symbols

  section2_library/symbols

  allows you to use the same folder name exact for the two symbols of the section file. For example, if the path to the symbols in the '1' section is just /symbols, copy/paste in the folder "section 2" gives exactly the same way. Now to really make this work, you will need to introduce as many levels of folders under upward according to the need of separate sections. Therefore to examine the properties of the symbol and determine to what extent raise lever folder, you need to go.

  Or there may be a simple way in Flash to define root relative paths so that the copy/paste works... but I don't quite know.

  Best wishes

  Adninjastrator

• Is it possible in Windows 7 to create a CD copy of duplicate data

  Is it possible in Windows 7 to make a copy of a CD (I am referring to a data CD, not a music CD)

  Is it possible in Windows 7 to make a copy of a CD (I am referring to a data CD, not a music CD)

  Hello

  A data CD is pretty easy to copy.

  If you have just a reader, you can insert the data CD, copy all the files in a temporary folder and then burn files to a CD Virgin tose.

  If you have a CD player and a CD burner, you can select all the files in the CD player, drag and drop them on the CD burner and perform engraving.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Duplicate symbols

  I created a symbol that contains certain text fields, then I duplicated this symbol on the stage. The problem is when I edit text in a single symbol, the other is change eather.

  DRM for your help

  I'll let you know. of course, but first of all, let me thank you for your immediate response

• Duplicate symbol-&gt; Exchange png

  Hello

  could someone help me please:

  I created a symbol on the timeline. In this symbol (video clip), I use a png!

  Now, I want to reuse the same 'clip '. So I duplicated the symbol.

  When I change the png in it now, it will be changed in the two symbols, but I want to change in the double.

  Hope you understand what I'm looking for,

  Sorry for my bad English,

  Thank you

  You can swap the image with:

  SYM.$("imagesElementName"). CSS ("src", "images/ImageName.png");

• If I copy a symbol several times, it will slow down the animation?

  Maybe this is a stupid question.

  I have a very simple symbol playing in my animation. It s a little red dot that changes size from 100% to 50% and then repeats.

  I copied (no duplicate of symbols pannel) this symbolt several times in animation and plan to copy loads more, maybe hundreds. This will slow down the animation, or all points working through this first original symbol?

  Let me add a clarification. If you duplicate a symbol in the control panel of the elements when you change something in one of them, this change also occurs in the other. Here are the instances of the same symbol. If you duplicate a symbol in the library, and then you change something in one, it will not affect the other. You have created a new symbol. You have now 2 distinct symbols.