copy data in the array constant

Similar Questions

• why I'm unable to copy data to the USB in windows 7

  why I'm unable to copy data to the USB in windows 7

  Hello

  You don't say how you try to do.

  You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.

  It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V

  Another method is to drag and drop the data from one drive to another.

  See you soon.

• Copy data between the custom dimension members or scenario

  Dear Experts,
  
  I'm back with my silly question.
  Is there anyone know how to copy all the data (not only entity currency) between members in the custom dimension? Our HFM application has a different type of data because the type declaration (legal and audit). Whenever we arrived with our legal data, we copy our legal consolidated data for verification. We tried to create a formula (using hs.exp) to move data from legal to check, but apparently, this formula should be write inside Sub calculate (). Is not supposed, we do not want to run the copy data every time that the user click on calculate.
  
  We also perform copy data between the scenario, as actual to Budget. This activity also needs all the data consolidated and final.
  
  So the condition for the copy of data are:
  -data must be consolidated
  -Copy all the data, including the adjustment
  
  Is there a formula or a way to copy the data that can be triggered individually (click 1 rules that run only copy data) by the user?
  
  Thank you very much for your kind response,
  -Anna

  Hi Anna,.
  As you say, you cannot trigger different parts of rules to run in HFM. Instead, you use a condition. In your case this condition might be guided by the management of the process. You can use a combination of GetSubmissionPhase, review status , and ReviewStatusUsingPhaseID functions that returns the current process management level and presentation details: phase. To me, it seems that as soon as you have finished legal, you complete a part of your process cycle and enter another stage of verification. Here are the parts of your publishing process, if you have defined a process in HFM management or not, which means that you should consider using it.

  -Kostas

• entering data in the table-constant

  Hello

  is there a possibility of comfort more to enter a large number of values in a constant matrix in the block diagram? I want to built a constant with several hundred values without having to type them. For example to cut and paste?

  Thank you

  Christian

  If you can read data from a file or a database, you can simply load the data and the output to an indicator.

  Select the indicator on the block diagram, right click and select "change constantly.

• Copy data between the cubes

  I need to copy data between two cubes (using a business rule). I can do using Partition/replication? If so, anyone have an example on how it's done? I am currently using @XREF, but that does not transfer data for the blocks that do not already exist in the database target.
  
  I am very new to this so will get a detailed description.
  
  Thanks for your help.

  You cannot view a partition copy of a business rule. It is intended for the statements of calculation. I guess you could do a jexport or a dataexport and have a batch file that looks for the existence of the file and made a load of it. I don't know that it's a good solution, but if you need to execute a business rule, it might be a way. Of course, you could include the replication in the maxl scriot that is triggered by the creation of file.

• Entry in the array constant of gray

  I have a constant matrix 3 elements

  

  I want to remove the 3rd element and gray outside, so it looks like this

  

  Can't find one good way to do it other than remake the table in its entirety. It is very good when the table has only a few items, but when it's a reference to a shared variable of 50 table, it takes a while.

  Thank you

  Specifically, right-click-> data-> item Delete operations.

• How to copy data to the device in Blackberry

  I develop application for blackberry that have the back-end database. Database contains some data so I import that database of res on SD card, there are perfectely working in the Simulator. When I install my app into the device then it is not working what can be the issue I did not understand. Here is my code... call the method: DatabseCopy db = new DatabseCopy(); db.copyFile("/nm.db","file:///SDCard/Databases/nm.db");

  Yes, it is also my question to copy the database to the device?

• Copy data to the Clipboard

  Is there a way I can click a button to copy the data into a text field, or must it be done manually?

  It can be done with a script.

• Copy data using the MDX query.

  Hi all
  
  I use the Version 11.1.2 Essbse now I want to copy my data from a component of other component based on their UDA and erase this component particularly in ASO Cube using the MDX query.
  
  For example:
  
  I have my data in 'Part No' now I want to copy the data to based on their UDA Component1.
  
  
  Thank you
  
  Micka

  you will need to use a custom or "procedural" calculation You can find information about it at http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/maxl_excalc_as.html

• Copy of the data of the disk of the virtual machine on a Local disk is too slow

  We have recently implemented vMware view.   We vSphere 5.5 and 5.2 and made Desktop visualization server.

  We have SAN as HP 3Par and Esxi hosts are HP ProLiant DL380p Gen8

  Now all trying to copy the data from the disk of the virtual machine disk of the local computer are too slow. But if we are writing data from Local disk on the disk of the virtual machine is normal. And copying data between the two virtual machine disk is also fast.

  Thanks in advance for your help

  Dear all,

  Thanks for your help.

  We have analyzed the issue in 360 degrees, and we also examined your entries. Finally, we found the problem. It was that a defective fiber link has been creating the problem.

  We have recently implemented vMware and this flaw in fiber can also happened during this period. That's why we thought it may be because of vmware.

  Thanks again for your help

• Can I copy data from a VBScript script points?

  Hello

  If I have a 2D - axis in VIEW space, I can copy the data points to a new channel by clicking on the button ' copy of flags Data Points: Is it possible to have the same features of a VBScript? I can set and remove the flags, but I can't find a way to copy these flags.

  This is the key what functionality I want to automate my script

  

  Thank you

  Lucas

  Hi Lucas,.

  Define DIAdem VBScript indicators used the command ChnFlagSet. But there is no command in VBS to remove or copy the part with indicator of the curve. So I suggest you use the position of the cursor and read the x value of him, after that, you can find the following value in the channel (use PNo). If you have a box and two coursor one left and right to read x 1 (left) and x 2 (right). With this coordinates use the DataBlCopy command to copy data between the coursors to a new channel.

  If it's difficult, you can also use CHF to search for what is the value of a channel is reported and copy it to a new channel. Doing this, you first need to flag values.

  For example in this topic, you can also watch "Automatic Anzeige harmonischer offer" in the Finder for example DIAdem

  I hope this helps.

  Concerning

  TomBaum

• Redistribution of layout data in the storage disc 5

  Hello

  I'm created storage thinly provisioned to manage my collection of hard drives.  I have 6 drives I wanted to put in the available storage space.  However, because I didn't have enough space to hold all the data currently on the disks, I was copying data to the pool and then adding the disks one by one.  Currently I have 3 disks of 1.81 to filled to 100% capacity, 1.81 packed of 31.3% to 1 disc and 1 disc of 1.81 packed 0.03% to.
  I still have more data to add to the pool and a player more to add as well, but windows tells me that I don't have the ability.  It seems clear that storage space is striping for a minimum of three disks, and I don't have 3 disks with the amount of available space.
  I need a way to redistribute the data from disks of 100% used on drives unfilled.

  Hello

  Follow the links

  http://social.technet.Microsoft.com/forums/SV/winserver8gen/thread/e27986ef-f4e0-4323-B712-5b693f1a6dc5

  http://social.technet.Microsoft.com/forums/en-us/winserver8gen/thread/dc73b01c-ae80-4A3F-9c20-e501c240f809

  http://support.Microsoft.com/kb/314343

• HOWTO copy effectively chart the data portal

  I have a table in memory VBS and would like to create a channel in this data set-based data portal, I currently use this construction of code to copy the data:

  ' intChannelCount is the number of samples

  ' MaxHold is the array of data to be copied

  ' oFFTMaxHold is the string of data that is the target of the data

  counter = 1 to intChannelCount
  oFFTMaxHold.Values (counter) = MaxHold (counter)
  next

  It's rather slow (and if data preview is open in the data portal) still a lot slower.

  Is there a method to copy the entire table in one operation on a string?

  Tone

  Hi tone,

  If you have DIAdem 10.2 or later, you can use the following command to do this with a command - by the way the table of values as one of the parameters - order this is a common situation when you query records of a base you want to load into the data as data channels portal.

  ChanRefsArray = ArrayToChannels (ValuesArray, ChanNamesArray)

  In the case of your example, it would be:

  Call ArrayToChannels (MaxHold, Array (oFFTMaxHold.Name))

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Adds data to the binary file as concatenated array

  Hello

  I have a problem that can has been discussed several times, but I don't have a clear answer.

  Normally I have devices that produce 2D image tables. I have send them to collection of loop with a queue and then index in the form of a 3D Board and in the end save the binary file.

  It works very well. But I'm starting to struggle with problems of memory, when the number of these images exceeds more than that. 2000.

  So I try to enjoy the fast SSD drive and record images in bulk (eg. 300) in binary file.

  In the diagram attached, where I am simulating the camera with some files before reading. The program works well, but when I try to open the new file in the secondary schema, I see only the first 300 images (in this case).

  I read on the forum, I have to adjust the number of like -1 in reading binary file and then I can read data from the cluster of tables. It is not very good for me, because I need to work with the data with Matlab and I would like to have the same format as before (for example table 3D - 320 x 240 x 4000). Is it possible to add 3D table to the existing as concatenated file?

  I hope it makes sense :-)

  Thank you

  Honza

  • Good to simulate the creation of the Image using a table of random numbers 2D!  Always good to model the real problem (e/s files) without "complicating details" (manipulation of the camera).
  • Good use of the producer/consumer in LT_Save.  Do you know the sentinels?  You only need a single queue, the queue of data, sending to a table of data for the consumer.  When the producer quits (because the stop button is pushed), it places an empty array (you can just right click on the entry for the item and choose "Create Constant").  In the consumer, when you dequeue, test to see if you have an empty array.  If you do, stop the loop of consumption and the output queue (since you know that the producer has already stopped and you have stopped, too).
  • I'm not sure what you're trying to do in the File_Read_3D routine, but I'll tell you 'it's fake  So, let's analyze the situation.  Somehow, your two routines form a producer/consumer 'pair' - LT_Save 'product' a file of tables 3D (for most of 300 pages, unless it's the grand finale of data) and file_read_3D "consume" them and "do something", still somewhat ill-defined.  Yes you pourrait (and perhaps should) merge these two routines in a unique "Simulator".  Here's what I mean:

  

  This is taken directly from your code.  I replaced the button 'stop' queue with code of Sentinel (which I won't), and added a ' tail ', Sim file, to simulate writing these data in a file (it also use a sentinel).

  Your existing code of producer puts unique 2D arrays in the queue of data.  This routine their fate and "builds" up to 300 of them at a time before 'doing something with them', in your code, writing to a file, here, this simulation by writing to a queue of 3D Sim file.  Let's look at the first 'easy' case, where we get all of the 300 items.  The loop For ends, turning a 3D Board composed of 300 paintings 2D, we simply enqueue in our Sim file, our simulated.  You may notice that there is an empty array? function (which, in this case, is never true, always False) whose value is reversed (to be always true) and connected to a conditional indexation Tunnel Terminal.  The reason for this strange logic will become clear in the next paragraph.

  Now consider what happens when you press the button stop then your left (not shown) producer.  As we use sentries, he places an empty 2D array.  Well, we dequeue it and detect it with the 'Empty table?' feature, which allows us to do three things: stop at the beginning of the loop, stop adding the empty table at the exit Tunnel of indexing using the conditional Terminal (empty array = True, Negate changes to False, then the empty table is not added to the range) , and it also cause all loop to exit.  What happens when get out us the whole loop?  Well, we're done with the queue of data, to set free us.  We know also that we queued last 'good' data in the queue of the Sim queue, so create us a Sentinel (empty 3D table) and queue for the file to-be-developed Sim consumer loop.

  Now, here is where you come from it.  Write this final consumer loop.  Should be pretty simple - you Dequeue, and if you don't have a table empty 3D, you do the following:

  • Your table consists of Images 2D N (up to 300).  In a single loop, extract you each image and do what you want to do with it (view, save to file, etc.).  Note that if you write a sub - VI, called "process an Image" which takes a 2D array and done something with it, you will be "declutter" your code by "in order to hide the details.
  • If you don't have you had an empty array, you simply exit the while loop and release the queue of the Sim file.

  OK, now translate this file.  You're offshore for a good start by writing your file with the size of the table headers, which means that if you read a file into a 3D chart, you will have a 3D Board (as you did in the consumer of the Sim file) and can perform the same treatment as above.  All you have to worry is the Sentinel - how do you know when you have reached the end of the file?  I'm sure you can understand this, if you do not already know...

  Bob Schor

  PS - you should know that the code snippet I posted is not 'properly' born both everything.  I pasted in fact about 6 versions here, as I continued to find errors that I wrote the description of yourself (like forgetting the function 'No' in the conditional terminal).  This illustrates the virtue of written Documentation-"slow you down", did you examine your code, and say you "Oops, I forgot to...» »

• problem copying of data between the tables

  Hello members,
  
  Its my first day using SQL queries the server for Oracle 10 g. I used the following query to copy certain fields in a table:
  
  CREATE TABLE SAMPLE_TEMP (SELECT customer BALANCE OF CUSTOMER_ALL)
  
  The CUSTOMER_ALL table has more than 2 million documents. I managed to create an array and copy of the data, but the new table could fill only 52978 records.
  
  -Samples in my table
  BALANCE CUSTOMER
  6.28899273 0
  6.28899274 0
  6.28899275 0
  6.28899289 625.12
  6.28899292 2666.24
  
  How can I go about fixing this? I have to declare a structure and set it to the number of records that I will store? Any guidance will help me get started.
  
  Concerning
  
  Newbie

  Hello

  If the CUSTOMER_ALL table is a living picture, he could have new records INSERTed because you copied the data, so you'll have different counts.

  To check the difference of data:

  SELECT CUSTOMER, BALANCE FROM CUSTOMER_ALL
   MINUS
  SELECT CUSTOMER, BALANCE FROM SAMPLE_ALL