Copy icons between vi in LV 2009

Similar Questions

• How to copy files between computers on the LAN

  I have a wireless network at home. How can I copy files between computers?

  You have access to the files on each computer in the another computer - can you open and read them?  In other words, the network connection is working properly and you have the permissions of files and folders?  If this isn't the case, after return and we will address this as a separate issue.

  If so all you need to do is open Exploere Windows on a machine, and map a drive to the C:\ drive on the other machine.  Here's how to map a drive to another computer: http://www.vista4beginners.com/Map-Network-Drive.  You "got to do thi on the other machine if you want to share files in the two directios.

  Once done, open Windows Explorer and go to the drive where, the file to be copied, right-click on it and select copy.  Then go back to Homepage Windows computer and select the drive where you want to copy the file (in this case, the mapped network drive).  Go whenever you want to copy and click the folder where you want that he stored and right-click and select Paste.  The file will be copied.  That's all there is to it.  Once the mapped drives copy really works exactly as it does if you have just one computer that you are handling.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Copying files between hard drives problem

  Hello

  I have problems copying files between hard drives on my computer. I was having this problem on Windows 7 and Windows Vista, but never met him on XP.  It seems that there are several similar topics, but I think I've noticed a few oddities in my own experience...

  I have several drives, between 500 GB ~ 1 TB.  Problems arise when I try to copy a folder with a large number of files (pictures, records about 4 GB in size, typically).  Initially, the transfer rate would be HD burst speed, somewhere between 90 MB to 150 MB.  Speed would be reduced to about 30 MB, or even lower.  The transfer ends by becomes so slow that the operation would take hours to complete.  If I try to cancel, it would take minutes to do.  The computer run slowly for a long period of time, with an offset of intermittent until I have to reboot the system.  This occurs regardless the source and destination drives.

  On some Samsung drives, this problem is actually lead to the corruption of data on the source and destination drives and i/o error messages.  CHKDSK runs at startup, try to solve the problem, but the data would be lost or unreadable disc.  I have since thrown the Samsung WD drives, do not have IO error, but the file copy problem persists.  I also disabled chkdsk at startup for all readers.

  My drivers and Bios are up-to-date.  Computer is free of viruses and malware.  I have no more trouble with Windows 7.  Curiously, if I compress my folders/files in one RAR file, I have no problems copying (transfer rate remains stable at 30 ~ 50MB).  This leads me to believe that this is not a hardware problem, but a problem with the Explorer of solutions, and that respect more particularly with the number of files transferred rather than size.  (But unpacking these files also lead to poor performance sometimes...)

  Is this a known issue that will be corrected?  I really like Win7, but because I work with large number of files and many backups all the time, stability during the file copying is a must.  I have perhaps to go back to XP, or use another OS entirely...

  I had the same problem;

  My system-

  Windows 7 Pro 64
  Core i7 940
  7200 RPM dual 500 GB SATA
  Gigabit ethernet

  Gigabit ethernet switch
  Gigabit router

  Buffalo NAS 1 TB, RAID 0, Gigabit Ethernet

  -----

  I was getting speeds of transfer of a maximum of 500 / 600 KB/s between the hard drive and network storage drive. I went through a number of * fixed * on the web without success, however, I disabled "TCP AutoTuning" and "RSS" rebooted and voila, I now get speeds of transfer of 9-10 MB / s and from the network drive.

  The fix
  It should be noted that, in addition to this, I have updated to the latest updates for Windows and off the DRC in the Windows Options under programs/features.

  How to disable TCP AutoTuning and receive scalability side

  1. Open a prompt with administrator rights.
  2. Type the following commands, and press enter (the second command on RSS is optional):

     netsh interface tcp set global autotuninglevel = disabled
     netsh interface tcp set global rss = off

  3. Restart the computer.

  
  ----------------------------------

  website design agency wirral

• Record vm of copy-DatastoreItem between virtual centres model

  How can I use the datastoreitem copy to copy a folder of models a vcenter to vcenter another vm?

  Hello, tdubb123-

  I think that you will need to make a copy in two steps to achieve this:

  Copie-DatastoreItem 0) to a staging location (say, local file system running PowerCLI)

  (1) an another copy DatastoreItem call to copy from the intermediate location in the destination data store in the destination vCenter

  "' You can get the vCenters data warehouses the different browsing the PSDrive" vmstores------:  So, you copieriez to vmstores:\sourceVCenter\someCluster\datastore0\ to d:\temp\, then d:\temp\ to vmstores:\destVCenter\someOtherCluster\otherDatastore\, for example.

  It seems that you can not copy directly between vCenters with this cmdlet.  Trying to do so returns the error, "copy-DatastoreItem: impossible to copy data store objects in a store of data managed by another VC Server»

  What the round point road, however?

• Disable copying files between virtual machines

  When I go to several virtual desktops using VMware View 4, I am able to copy files between virtual machines. Virtual machines are located in various isolated networks. It is a security problem in my organization and how do I disable this feature? I am not able to find any related configuration in sight connection to the server. Thank you!

  I assume you are using RDP as the Protocol currently, correct?

  In this case, you will need to implement some GPO:s in the workstations to avoid copy and paste.

  Look in the 'Extras' folder on the view connection server, there are a number of ADM files that you can implement to restrict all sorts of things.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Copy data between the custom dimension members or scenario

  Dear Experts,
  
  I'm back with my silly question.
  Is there anyone know how to copy all the data (not only entity currency) between members in the custom dimension? Our HFM application has a different type of data because the type declaration (legal and audit). Whenever we arrived with our legal data, we copy our legal consolidated data for verification. We tried to create a formula (using hs.exp) to move data from legal to check, but apparently, this formula should be write inside Sub calculate (). Is not supposed, we do not want to run the copy data every time that the user click on calculate.
  
  We also perform copy data between the scenario, as actual to Budget. This activity also needs all the data consolidated and final.
  
  So the condition for the copy of data are:
  -data must be consolidated
  -Copy all the data, including the adjustment
  
  Is there a formula or a way to copy the data that can be triggered individually (click 1 rules that run only copy data) by the user?
  
  Thank you very much for your kind response,
  -Anna

  Hi Anna,.
  As you say, you cannot trigger different parts of rules to run in HFM. Instead, you use a condition. In your case this condition might be guided by the management of the process. You can use a combination of GetSubmissionPhase, review status , and ReviewStatusUsingPhaseID functions that returns the current process management level and presentation details: phase. To me, it seems that as soon as you have finished legal, you complete a part of your process cycle and enter another stage of verification. Here are the parts of your publishing process, if you have defined a process in HFM management or not, which means that you should consider using it.

  -Kostas

• Copy layers between the PS files in the same position?

  Someone know how you copy layers between photoshop by drag & drop documents and have layers placed in the same situation?

  Try this:

  1. Select the layer duplicate the layer in the layers Panel dialog box in your source document.

  2. in the dialog box, specify your paper target as the destination for the copy.

• Copy data between the cubes

  I need to copy data between two cubes (using a business rule). I can do using Partition/replication? If so, anyone have an example on how it's done? I am currently using @XREF, but that does not transfer data for the blocks that do not already exist in the database target.
  
  I am very new to this so will get a detailed description.
  
  Thanks for your help.

  You cannot view a partition copy of a business rule. It is intended for the statements of calculation. I guess you could do a jexport or a dataexport and have a batch file that looks for the existence of the file and made a load of it. I don't know that it's a good solution, but if you need to execute a business rule, it might be a way. Of course, you could include the replication in the maxl scriot that is triggered by the creation of file.

• Distinction of color or icon between searc and private research

  How to distinguish between the normal search engine and a private window? Can I change the color or the [lace an icon any private window, it is obvious that I am private research?]

  Windows 8.1

  Normally a private window will have an icon of white-mask-on-purple-tab close button minimize / maximize-close top-right.

  However, if you start Firefox in private browsing mode automatic, then all windows are private and there is no icon. (This mode is selected by going to Options/life private/Firefox will: don't remember history)

  Which corresponds with your Firefox?

• Differences between the Mac Pro 2009, 2010 and 2012 Logic Board

  What are the differences between the logic board in the Mac Pro 2009, 2010 and 2012? In particular, what are the differences in the logic board between the MacPro4, 1 and MacPro5, 1? When a 2009 logic board is updated to 5.1 firmware is identical to the logical tips 2010 and 2012? Updated to 5.1, what is happening with the SMC firmware?

  Answers in-depth in this type of broad would be book-length responses.

  Where are you going with this?

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• How can I move/copy data between desktop Vista user?

  Hello

  My home computer has 3 users, 2 personnel and an administrative one system.  [How] can I copy or move files between desktop ordinary user without login again as a system administrator? As a regular user, that I can't even see the jobs of the other user.

  Thank you.

  I think I've cracked it.  I had to abandon my personal account admin rights and of course a password to protect these rights.

• EX90 - copy favorites between units

  Hello

  I have several EX90s and would like to copy the Favorites between several units.

  Anyone know where favorites are stored? they aren't xconf, currently logged in as root, and looking for a text or xml file.

  Thank you

  Hello

  You can find the Favorites in the/config/pb.xml file.

  I hope this helps.

  Thank you

  Shilpa

• Copia VM between data automated warehouses

  Is, I need if any can help me, I need building una tarea me Permite automatizar her copia (CLONADO) una o several VMs desde one Datastore hacía otro.

  Desde is muchas gracias

  Rolando Kohl

  Como estas?

  If cerebro scheduled task ordered realize esto, podes clonar between hasta between data centers.

  Saludos.

• Copy RPD between two circles

  Hello
  
  If anyone can help with the process of copying of an RPD between two environments (development to production, for example).
  
  Thank you

  See this link

  http://www.rittmanmead.com/2008/04/28/migration-OBIEE-projects-between-dev-and-prod-environments/

  Make sure you have all the TNS entered in the TNSNames.ora file in the new environment. To match the details of the database data in the connection to TNS entries pool if they point to the correct database.

  I hope that the structure of RPD is same in both environments IE users, groups are same.

  Kind regards
  Sandeep

  Published by: Monin sandrine on November 24, 2010 08:56