Copy of files and folder

Similar Questions

• Unlock the file and folder attribute does not work in LV 2012

  Hello

  I use unlock attribute to unlock a file (defined in the specification to build installer-> settings of the Source file-> file and folder attributes). This Setup program installs the application in Program Files (Win7 x 64) and when the application is started it creates a file in the folder "unlocked". I've used it several times with LV 2011, but it does not work with LV 2012 (the folder is not unlocked)? An example for LV 2012 (without installation) is fixed, the same example works if I build with LV 2011.

  I received an email from support TODAY:

  "As we have it, I analyzed the behavior you described ' unlock folders and files not working not. '"
  The error could be reproduced. It was also successfully detected and documented.
  The development team is working on this and the next update may have already solved this problem. »

  I hope that this will soon be :-).

• I can finf a log of deleted files and folder in Event Viewer

  can I finf a log of deleted files and folder in Event Viewer ARE ANY TOOL

  Hello rameshkumar_11240,

  Thanks for the reply.  For the question that you described above, please transfer this issue to the address provided below in Microsoft TechNet Forums.

  Microsoft TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• find any newspaper of deleted files and folder in Event Viewer

  find any newspaper of deleted files and folder in Event Viewer OR any tool to find

  AFAIK there is no newspaper.  Do you need to recover deleted?

  If so, try a third party called Recuva application.

• Cannot delete a file and folder

  I am trying to delete a file and folder but his always showing me the attached message. Please see the attached screenshot.

  This situation indicates that your system is reading the index hard disk that points to a location where the file no longer exists.

  I suggest that you run a chkdsk c: /r to solve this problem.  If it is a huge drive, this process will take some time.

• Finder - how to display all THE files and folder without exception names in searches?

  I like Mac OS.  I can't WAIT finder.  I just want that he show me everything that matches my search string - files, folders, images, etc.  Each of them, everywhere on my machine.  I just want it to be simple.  Or point me to a good replacement for Finder program.  I waste so much time trying to find things that should take a simple search...  I looked at all the stupid shortcuts like Shift + Cmd + G, which can't find folders in the directory you are in (why would it be separated anyway?).

  Thank you

  CMD-SHIFT-g is quite a search function. It allows you to enter the path of the folder you want to open. What you think "seeks" the current folder is really thin path. If you enter no previous path information, it looks in the current working directory to the folder name you typed in the dialog box.

  You can set the default search starting location in Finder preferences. I have mine for current folder. Looks like you might prefer "search this Mac".

  

  Typing in the search field in the Finder will search the contents and filename. It will offer to search for chips to match types he concludes.

  If you just want to search for files and folders, but no content file, then use cmd-ctrl-shift-f to search by name (you can adjust this shortcut to the system preferences keyboard).

  If you don't get the results of your research, then perhaps your Spotlight index is corrupt.

  Featured: how re-indexing of folders or volumes - Apple Support

  If this does not work for you, try to find any fileor EasyFind

• Assign the page file (.vmem) VM a specific file and folder name.

  My AV (Comodo) analysis file (.vmem) VM paging to death (the hosts making it unusable).  I want to assign the file to the SSD and give it a permanent name.  I read that I can attribute the work of virtual machine files directory and this will help you.  The problem is Comodo.  Can I exclude a file or folder of the analysis, but the mutation .vmem file name prevents the exclusion to work whenever I turn off / the virtual machine.  Thanks for any help.  Enjoy, John.

  EDIT: I just restarted my VM and host and then grew up the virtual machine.  He continued to wear the same name of file (.vmem).  It will continue to be this way?

  One option is to add the following parameter to the file vmx of your comments (with comments turned off and closed player).

  mainMem.useNamedFile = "false".

  This will change the behavior to NOT use the named file for the permutation of VRAM.

  If this does not change the behavior, you may need to change the host config.ini file and add the line there instead.

  Personally, for any AV I always exclude my file to the root of the VMS under analysis, given that the files are constantly changing and open, and the files themselves do not contain viruses. This is NOT to say that the customers themselves can not GET a virus inside their own operating system... but the files to your host will not some virus shipped including your AV needs to scan contain.

• File and folder name format

  What is the correct file and the name format for photos and folders files. Use "-", "_", "." when separating the names? And how many characters are allowed in Photoshop or Lightroom?

  What is the correct file and the name format for photos and folders files

  Any name in your operating system should work.

  Use '-', '_', '. '.

  There is no problem to use the dash or underscore. I have never tried creating a file name with a period in it (except for the file extension), so I don't know.

  And how many characters are allowed in Photoshop or Lightroom?

  Yet once again, this is controlled by your operating system. What is legal in your operating system should work.

  Which brings a question side... most people don't much worry about the details of the file and the file naming... There are ways to organize, using keywords and other metadata in Lightroom, where these questions about the file and the file naming disappear... Add as many keywords as you had huge and similar legends long with all kinds of special characters, this isn't a problem. Using the folder and file names as organization tool has some limitations.

• Downloading files and folder mgt

  Hello
  
  On the management of records, I can create folders in content management server and download their file need.
  
  is this only possible via the contentmgt Server? in liferay. When I login in my application. I can fileupload goto page and create a folder and download file I have the role of file upload and can check out them in the pages of content through navigation... How can I add this feature in my webcenter application. It seems to me that people who want to manage the file and download files in them, they have had to log in to managing content instead of our application services don't know how can I merge these two features in my application? I; m suggest not please

  When you create a connection to the AAU in Jdeveloper, you have a checkbox "set as primary connection. When you do so, you don't need to configure anything in the taskflow. You can also check this box by modifying an existing connection.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• is it safe to delete the files and folder to softwaredistribution.old?

  Recently, I have my muweb wuwebcontrol was too bad and I'm trying to find a solution to fix it then I read a few forums in microsoft that you can solve the problem if you try to rename c:\Windows\SoftwareDistribution in softwaredistribution.old and then go to windows/system32/muweb.dll and then delete the c:\windows\system32\muweb.dll and wuweb but my automatic updates is not heading itry even choose the automatic updates. After I try to download the microsoftFixit50203 and intall to solve the automatic updates of the problems. But the step of automatic updates. I opened the windows/c:\Windows\SoftwareDistribution why softwaredistribution.old still in there? Now, I have two folders to c:\Windows\SoftwareDistribution and softwaredistribution.old appellation in c: / / windows is good for my computer with the record in doubles, but different inside files because the other is new?

  Yes, you can safely remove the old softwaredistribution.old folder.

  Hhhhh TaurArian [MVP] 2005-2010 - Update Services

• file and folder size

  Hi, I'm working on a new computer Sunrise and execution including obtaining my backups before day of the load on my new computer.  When comparing a few folders on the hard drive of my main computer, last night made backups don't always correspond to the size and number of files, at least in some cases, but not all.

  I use XP on the old system and my backup hard drive is a Seagate.  There are plenty of room on my Seagate for even more data.

  For example, my main computer indicates a file like: 168 concerts and 47781 files while the backup shows 167 concerts and 45623.  Another folder on my main computer will display: 657 megs and 45 files while the backup shows 647 megs and the same 45 files.

  Can you explain this for me and if there is a way to check that all my information is actually saved properly?  Also, would you recommend the reset of my program to select all the files I want to save as a new start and then, by running another backup backup?  Thank you

  There may be several things happening here.

  First, make sure you that you compare 'size' of the folder on a drive in the folder 'size' on the other disk and not "size of the folder on the drive."

  "Size on disk" is very often not the same as the 'size' (it's usually larger).  This is because the files are stored in "clusters" of a fixed number of bytes.  There is only one file per cluster and so there is almost always unused space.  This is called "soft"

  Cluster size represents the smallest amount of disk space that can be used to hold a file. When the size of the files does not come out to an even multiple of the cluster size, extra space must be used to hold the file (up to the next multiple of the cluster size). On the typical disk partition, the average amount of space that is lost in this way can be calculated using the equation (cluster size) / 2 * (number of files).

  For example, suppose that you have 12 ounces of water and only 10 ounces cups.  You need two cups - 20 ounces of "storage" - to hold all the water, and one of them is essentially empty.  On the other hand, if you had 4 oz. cups, you would need three cups - 12 oz of "storage" - and would have no unused space.

  Cluster size differs between the various files used by Windows systems.  Most use facilities XP NTFS file system, which has a cluster size default to 4 096 bytes (4 KB) for partitions up to 16 TB.  The FAT file system on the other hand, uses a clusters of 512 bytes and 1, 2, 4, 8, 16, 32, or 64 KB depending on the size of the partition.

  External number of readers is preformatted using the FAT file system.  So if you compare "size on disk" and the internal drive uses NTFS and the backup drive uses FAT, there almost certainly will be a different size "on the disc" between the two.

  In your first example (168 GB file), it seems that you can not have guaranteed some hidden or system files.  What software do you use to make the backup?

  Most of the good software backup has an option to "check".  Exactly what he is "verified" may be different for different applications, but if it is available in the software you have, you have to use.

• Unchecking read only attribute on files and folder, subfolders does not persist

  I'm trying to disable the read-only attribute in the properties of a folder in the file system.  I uncheck this attribute, I say, too, that he would do that by clicking on apply, then it does to all files, folders, and subfolders... etc and it does.  Then I click ok to close the properties box.  If I reopen it the properties box, the read only attribute is on again once.  I tried several times but keep having the same problem.  I am logged in as administrator.

  How to keep turning off the read-only attribute?

  Do you mean that the read-only box is blue? This does not mean that the read-only attribute is on.

  See this: http://www.vistax64.com/tutorials/107890-read-only-file-folder-attribute.html

• I used to be able to copy a file and paste it on the internet, like e-mail. Then, I 'upgraded' and cannot. How can I copy files from the window and paste it into email when there are not options Paste as before?

  See above

  I used to be able to copy and paste, but since the upgrade can not

  toolbars is no longer available on the top

  How copy and paste emails or chat with a file in windows, sites like Match.com?

  > toolbars is no longer available on the top

  Assuming that you are referring to Internet Explorer missin the Menu bar...

  Right-click on an open under the address bar > click bar on the popup box.

  

• copy my files and once completed they were in zip files, now I can not open zip files, I use vista bussiness... Thank you.

  make backup of my files aand ordibary copy in zip files, they now need to open and I get message cannot open files, etc.

  You must use the restore backup procedure to restore individual files of access - you can not access it just directly from the backup (even if it's possible with 3rd party software - you can check Bing, Google,www.tucows.com and www.download.com).  If you made a backup of the complete picture, you should definitely 3rd party software even be able to do as you cannot access the individual with restore files (only if doing a restore completes).

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup)...

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.