Copy-paste and audio between projects - no reading lifting

Similar Questions

• I want to download a file and do a "save under" directly in my working folder. Instead, it seems to save it somewhere as a generic term should I then copy, paste, and rename manually. Is there a way to rationalize this?

  I want to download a file and do a "save under" directly in the folder of my work. Instead, Firefox downloads somewhere with a generic name I have to copy, paste, and then rename the file. Is there a way to streamline this process simple?

  Options > general downloads section

  • If "Save files" is selected, all files will save the location shown without the intervention of the user.
  • If 'Always ask me where to save files' is selected, the user can choose the location and change the name of the saved file.
  • See-> window Options - general Board

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• feature request: copy and paste the pages between projects

  Do not copy and paste content. I look forward to resizing or do the copy paste several times to get it brought to the course. Just make a seamless drag and drop pages of projects possible and I would be happy

  There are already two ways you can do it now:

  1: add content to a library and then drag

  2: drag the tab for your two pages of the tab bar so you can have them both open at the same time. You can even select multiple items at once and drag them to.

  

• When the copy of my symbols between projects lose their source file after the backup

  Hey,.

  This is my first post here, but I have been struggling with this for a while and have not been able to find a similar position again. So I use Windows 7 and Flash CS 5.5.
  I'm animated short episodes of an animated mini series, with several characters. Our character symbols or organized in folders and then these files are copied to the front she draws from the previous episode at the library of the next episode.

  However, as soon as I save the file all the symbols will empty. Under the symbol properties, they have no source file. The source file disappears. I can re-link but these symbol libraries have more than 100 symbols.

  This only happens to the symbols, I have not placed on the time line yet, but it becomes tedious to hunt endlessly through old projects of re - link or copy symbols that have disappeared.

  My question is why what is happening, and how to avoid it?

  Yes, I think it's a path problem.

  Because you can't have two files with exactly the same name, do a copy/paste changes this way. OK... then how can we cheat/fool Flash using the same path (sort of) for two different folders?

  Thinking about support: you can do tests on a small scale... not the whole project?

  Can you CUT and paste and the destination folder works?

  Use the same folder for both libraries? and the path of the folder root... kinda like an address absolute, but relative to root? This must be done when you make all of the symbols of origin.

  Change the location of each folder in library of sections so that they are not in the same main folder so that you can use the same name of subfolder in the folder of each section? For example:

  section1_library/symbols

  section2_library/symbols

  allows you to use the same folder name exact for the two symbols of the section file. For example, if the path to the symbols in the '1' section is just /symbols, copy/paste in the folder "section 2" gives exactly the same way. Now to really make this work, you will need to introduce as many levels of folders under upward according to the need of separate sections. Therefore to examine the properties of the symbol and determine to what extent raise lever folder, you need to go.

  Or there may be a simple way in Flash to define root relative paths so that the copy/paste works... but I don't quite know.

  Best wishes

  Adninjastrator

• copy paste and same symbol names

  Hello

  I often encountered problems when you copy a clip from one film to the other because the different symbols have the same name. Most of time that happens when I want to copy paste Illustrator shapes for example in an empty movie, clean and then copy it in my film destination. The options to replace the symbols to be in my movie or replace those of my new clip are not very useful.

  The solution would be to either as Illustratior copy graphs in the film, that I'm putting or rename the symbols when they have the same names (which can be very nice work, if you have several). Y at - it an option / a way to make it easier to copy paste the same named symbols?

  Using folders in the Library Manager can do same name symbols work, so do not force you to what either rename.  Before avant de copier copy your movieclip in a new project, make sure that the symbols in the file are stored in an easy to navigate and manage the structure of folders, and then when you import your video clip, at the root of the import library, and there will be no naming conflicts.

• Cannot copy & paste and need to connect permanently to different sites

  I've upgraded from Vista to Windows 7, everything was fine until, after a few updates.  Now I can't copy & paste or same cntr C & cntr v or the computer crashes upward.  I connect permanently to facebook, ebay and Bank cometimes every 5 minutes!  Will you please help or I'll buy just a new conputer!

  Step 1: Run Internet Explorer Performance troubleshooting tool and check if the problem persists. See the article below mentioned the same thing.

  Open the Internet Explorer Performance Troubleshooting Utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Internet-Explorer-performance-Troubleshooter

  Step 2: Follow the steps in the following Article in the Knowledge Base and check if that helps.

  Internet Explorer not responding, stops working, or restarts
  http://support.Microsoft.com/gp/pc_ie_intro
   
  See also:

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• CUT, COPY, PASTE and DELETE greyed

  Installed LR5 (update) when I select and image and try to go to CUT, COPY, PASTE or DELETE they are grayed out. tried to reinstall the same question

  Here in Lightroom (at least Mac) and works when you do keyword, otherwise they are greyed out.

  

• How can I copy, paste the Word document in Adobe Reader PDF?

  A customer is not using Microsoft Word, but type the text for my editing in Adobe PDF. Too many changes, too heavy for me. After the PDF to Word conversion, I change using different colors of ink. How can I copy, cut, paste edition WORD document into a PDF? Other than using "trombone" or features "attachments"?

  With Adobe Acrobat Reader, you can not. At the very least, it requires the full version of Acrobat, and even in this case, it can be difficult.

  Your best bet is to do all the editing of the original document (not the pdf) and then create a new pdf from that.

• Copy/paste and or remove the bug

  I have two different questions with Adobe Premiere (CC2015, running on 10.10.3, a lot of RAM), but they seem to be connected. one is to copy and paste, the other refers to remove.

  On a schedule, I'll mark one in and one out, with my tracks marked targets and all other active stocks.

  First of all, let's say I want copy this article and paste in another scenario, all leaving the choice of the original screenplay.  What happens is this: when I go to paste, it will stick in something 1 or 2 copies there.  I'll cancel it, then repeat the same action, and the right bit of the material will stick in.  I used to think maybe it's that I have somehow missed out on the stage of copying, but this happens if I use the keyboard commands or goes the long way and mousing commands in the Edit menu.  This does not seem to happen when I use the elevator or orders, only with the copy.

  On a related note, same scenario - marked inside and out on the timeline, with my tracks marked targets and active all the tracks.

  Let's say I want to remove the section that I scored.  I click on delete and Staples outside the marked area disappear, but the pieces that I've marked stay.  I cancel, then repeat them hitting the delete key, and deleted the correct bits.

  It also seems to be no pattern when that happens - it's incompatible, but frequent.  Workaround seems small, but it is very frustrating to have to make the same edit over and over.

  I tried to clear my cache and delete my preferences, but nothing helped.  Someone at - it suggestions?  Thanks in advance.

  In the example of video you posted, you seem to have a bunch of selected clips, as well as in and out of the points-

  

  In my view, that the selected clips take precedence over the starting points when copying.

  Try it without the selected clips and see if it will copy all the contents of the starting points.

  MtD

• Copy, paste and sizing

  I recently upgradedto CS5 and find what was simple and smooth to now be quite a battle of flashing lines frusrating jerky and confusing behaviour.

  How do the sizing of a graph now a day? I get varying results doing the same thing, it is difficult for my old timer brain to figure out.

  Sometimes I drag a corner with the command option shift and works of semi, if I strain my concentration. Sometimes the graphic in the box changes position. And sometimes the framework encompassing adds a different layer to what color seems to be an envelope of distance outside the original color of the fill layer.

  Anyway, I met three different effects, trying to do something that was a wink until I upgraded. I have not yet been successful by changing the size drawing ofan Illustrator in InDesign.

  What I'm missing here?

  Thank you

  Garrett

  It should still work fine. There was a bug that popped up around CS3 on Windows that requires you to hold down the CTRL (Cmd on Mac equivalent) before clicking on the mouse, and I developed this habit. AFAIK this never affected the Macs, but it could not bad to try pressing your modifiers before dragging with the mouse.

• How to avoid color changes when I copy and paste between projects?

  Change colors when I copy/paste the logo between open projects, as well in RGB - how to avoid that?

  Other users have solved the problem by clicking on the color chart, select tones and choose "use Lab values... ", but that doesn't change anything for me.

  So it is somehow necessary to export the corresponding shades as well as the logo - and if so, how do I that?

  OK sorry, I was an absolute fool:

  I assumed I was in RGB mode in the receiver project, because the samples were in RGB. But indeed, the project itself has been in CMYK, therefore all the colors of imported logos looked like they were mixed with milk or something...

  Sorry for wasting your time.

• Impossible to copy/paste or drag/drop of files. Cannot copy and paste text, either.

  The operating system would prohibit me files copy/paste and drag and drop files text copy and paste all of a sudden. No error message; the right operating system does not respond to my 'stick' and 'slide' actions; 'paste' is grayed out in the menu. ('Copy' seems to be black if I remember correctly).

  Need to reboot back to normal. A reboot about once a day because of this problem frequently.

  P.S. The computer seems to be slower than usual these days. kernal_task and Google Chrome Helper often go beyond 100% of the CPU in the activity monitor. My MBP has a 480 GB SSD (with use of 180 GB).

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Cut, paste and copy will not work

  In emails or fill out forms, copy, paste and cut do not work.

  Hello

  What is the format of the form? Number of PDF files will not allow you to cut, copy & paste except IF you have Adobe Acrobat on your computer.

  Kind regards

• Clipboard copy/paste

  I had this problem several times with the CS5 and CS6. I don't know if it's a Photoshop question or a question of Windows OS 8, but in any case it seems to happen only with Photoshop.

  I copy an image offline to edit in photoshop. After I finished I save and remove the layer of the image workspace to prepare for the next image. I take another image I want to paste in the same workspace of photshop. When I sticks, it sticks the same image that I copied first. She did the same when I restart Photoshop, that's why I think it may have to do with the Windows Clipboard.

  Also, I'm really interested in how "copy/paste" and the "Clipboard" work with different programs so that I can better understand how to use it with what seems to be a simple tool, but I still find myslef questions because I don't undertsnad filly it. "

  Using it properly - there's just something unknown causes interference between the OS and the applications.

• Save, cut, copy, paste are grayed out in Word 2003.

  I don't know how it happened, but in Word 2003, XP, many menu items are grayed out such as Save As, cut, copy, paste and many other options.  How does this happen, or more important, how can I activate this return?

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner