Cannot copy & paste and need to connect permanently to different sites

Similar Questions

• I want to download a file and do a "save under" directly in my working folder. Instead, it seems to save it somewhere as a generic term should I then copy, paste, and rename manually. Is there a way to rationalize this?

  I want to download a file and do a "save under" directly in the folder of my work. Instead, Firefox downloads somewhere with a generic name I have to copy, paste, and then rename the file. Is there a way to streamline this process simple?

  Options > general downloads section

  • If "Save files" is selected, all files will save the location shown without the intervention of the user.
  • If 'Always ask me where to save files' is selected, the user can choose the location and change the name of the saved file.
  • See-> window Options - general Board

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Cannot copy, paste etc.

  I cannot copy, paste etc on a new for me computer with windows 7. Any help appreciated

  Problem solved... I was missing the menu bar, thanks for the reply

• I work in local government, the Norway and need to work on 3 different PCs - an office, a Home Office, and a few times on my laptop (to show proghress and development). Can I install all these 3 places with my team account? (I never work simultanesly)

  I work in local government, the Norway and need to work on 3 different PCs - an office, a Home Office, and a few times on my laptop (to show proghress and development). Can I install all these 3 places with my team account? (I work on one of these 3 pc simultanesly).

  Hi claire nadège,

  According to the number of licenses you have purchased under the account of the team, you can install on machines.

  Kind regards
  Rave

• Cannot copy, paste, or save

  I can't copy, paste, or save in Dreamweaver 5.5.  It's frustrating because 3 months ago Suite Design CS2 crashed and I cannot reinstall it.  Help, please!  I get no support.

  Pretty much whenever I've seen this kind of problem, empty the Memory Cache DW will take care of it:

  http://forums.Adobe.com/thread/494811

• Windows 7 Home Premium 32-bit on a Dell Studio 140g running a NETGEAR WG111v2 54Mbps Wireless USB 2.0 adapt and loses the connection permanently

  I have a problem with this program-it very often loses the connection, so with any live video as a conference, he fall causing problems with, naturally, the frustration on both sides. The router is in another room may be just 25 feet away maximum which the signal passes through 1 wall and offered "free of charge to AT & T TV and Internet clients" so a technician said as saying "it's just a basic router", but the signal goes further to a TV, another 20-foot more away and had no problem connecting unless it is with the AT & T network itself. Even if he reconnects automatically most of the time, but sometimes I have to manually reconnect which can take of time also a lot of time. I had another SATA driver and separate, which was working fine then one day abruptly stopped and now that the driver to reconnect and I was forced to use the old and original driver and I'm back with the same problems. I can't find where it is that I found this other, independent driver, even with a search, and now I have no idea how to solve. I tried all suggestions with Microsoft Fix It without modification done or as it says "no changes have been made, your driver is up to date" and I have tried these suggestions and now I'm here. I also went to CNET to search for a driver, but not luck to everything I've read about the drivers there. Finally, I intend to go with another program called Easy Wifi Radar and I don't know what would be better to use Wifi adapter and since I have a few target (store) [s http://www.target.com/s?searchTerm=wifi+adapter & category = 9975894% 7CAll % 7Cmatchallpartial % 7Celectronics & lnk = snav_sbox_wifi + adapters] I guess I'll take the adapter on their part and their site search , I see a lot to choose gift cards, but who would work better with my system and this program of "Easy_WIFI_Radar"? Any suggestions? Maybe a better deal with another source of in-store/online Wifi adapter?

  Hi David,

  Thanks for posting on Microsoft Community.

  I understand that you have connected the external NETGEAR WG111v2 USB adapter to work with wireless internet and the connection is intermittent.

  Maybe it's because the wireless USB card driver and it is perhaps because of the hardware (USB wireless card) itself.

  Try the suggestions below and see if it helps.

  Method 1:

  You can try to download the latest Firmware utility from Netgear support site and check if it helps.

  Check out the link below to download the latest firmware for NETGEAR WG111v2.

  http://Downloadcenter.NETGEAR.com/en/product/wg111v2#searchresults

  Method 2:

  Dell Studio Hybrid D140G may come with the card wireless in the generation in it, you can try to disconnect the external USB NETGEAR WG111v2 adapter and try to connect to the network card wireless wireless generation.

  To connect to the wireless network, please visit the link below.

  http://Windows.Microsoft.com/en-in/Windows/view-connect-available-wireless-networks#1TC=Windows-7

  Method 3:

  Try disabling your antivirus software that may block the incoming connection wireless.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps, please reply with the status of the issue for further assistance.

• I have a new LenovoIdeaPadYoga11 and need to connect to my WiFi.

  I have a new Lenovo IdeaPad Yoga11 and you need to connect to my WiFi. Can you please guide me through this? Enid Bakewell

  You can visit this site;

  http://forums.Lenovo.com

• Cannot copy - paste text of Mac Notes App Photoshop

  Hey guys,.

  can't copy - paste text from the Mac App Notes into a Photoshop Document. I tried:

  new point of text-> paste. nothing is got stuck

  new text of paragraph-> paste. nothing.

  existing text (point and point)-> paste. nothing.

  Other applications such as TextEdit or Word seem to work well...

  Someone at - it had the same problem or has a solution for this?

  best/tia

  SEB

  It works on my Mac 10.11.2/CC 2015.1

  I can select/copy/paste of Notes.app on a text layer, but it does not keep the formatting.

  As for why it works on mine and not yours, I can't say.

• CUT, COPY, PASTE and DELETE greyed

  Installed LR5 (update) when I select and image and try to go to CUT, COPY, PASTE or DELETE they are grayed out. tried to reinstall the same question

  Here in Lightroom (at least Mac) and works when you do keyword, otherwise they are greyed out.

  

• Copy-paste and audio between projects - no reading lifting

  Hi all

  Whenever I have copy paste or raise the audio from one project to another (copy, record 1, close to the project, open project 2 paste), the audio works great for this session, but don't always play at the time where I reopen the project later. The audio in the project media / clip selection area will work fine, but when I double-click the clip I pasted in the timeline, the preview window of the clip shows a red field and no sound. Basically, it means I'm losing all changes that I made in project 1 and have to re - insert each piece of audio in the timeline of project 2 and redo my changes. What is the problem? Is there a way I can copy - paste audio editing from one project to another?

  (Edit :) I use CS6.

  Thank you very much

  Josh

  Post edited by: jmclaurin14

  It will not work like that because you're playing it on the Clipboard. What is temporary.

  Usemultiple sequences in the same project instead if you want to do. to changes

• copy paste and same symbol names

  Hello

  I often encountered problems when you copy a clip from one film to the other because the different symbols have the same name. Most of time that happens when I want to copy paste Illustrator shapes for example in an empty movie, clean and then copy it in my film destination. The options to replace the symbols to be in my movie or replace those of my new clip are not very useful.

  The solution would be to either as Illustratior copy graphs in the film, that I'm putting or rename the symbols when they have the same names (which can be very nice work, if you have several). Y at - it an option / a way to make it easier to copy paste the same named symbols?

  Using folders in the Library Manager can do same name symbols work, so do not force you to what either rename.  Before avant de copier copy your movieclip in a new project, make sure that the symbols in the file are stored in an easy to navigate and manage the structure of folders, and then when you import your video clip, at the root of the import library, and there will be no naming conflicts.

• Need to connect to an https site

  Hi all

  I would like to be able to connect to an HTTPS site that returns json for me to use in an application I created. Now I used this example to help me on the logic of things: http://supportforums.blackberry.com/t5/Cascades-Development/Method-for-making-an-HTTP-style-request-...

  The problem with this example is that it connects to a simple HTTP site and when I use it for my site it returns an error: SSL handshake failed.

  Can someone help me understand what Miss me.

  Thank you for the help

  UPDATE:

  OK, so here's what I added to my code based on the solution on this post: http://supportforums.blackberry.com/t5/Native-Development/Problem-with-HTTPS-on-Simulator/td-p/17754...

  So, same code as TwitterApp Selom explain in the first link, then added after the req was made in the TwitterRequest.cpp in the getTimeline function

  QString queryUri = "https://somesite/get?username=" + username
              + "&password=" + password;
      //qDebug() << queryUri;
      QUrl url(queryUri);
      QNetworkRequest req(url);
  
      QSslConfiguration config = req.sslConfiguration();
      config.setPeerVerifyMode(QSslSocket::VerifyNone);
      config.setProtocol(QSsl::TlsV1);
      req.setSslConfiguration(config);
  
      QNetworkReply* ipReply = netManager->get(req);
      connect(ipReply, SIGNAL(finished()), this, SLOT(onTimelineReply()));
  

  So now, I don't get this error more but I have an empty listview... Is there anything other missing?

  UPDATE 2:

  OK, so I put a couple of qDebug here and there and I see that my answer is is filled with the json. Now, it does not show in my list. I will keep you updated.

  I'm going to have a chance to look through this in detail today, so I'll give you a hint where I think the problem is to see if it unlocks to you.

  I think that what I said before is OK, but not clear enough.

  You get a QVariant.   This encapsulates a BLOB.   If it's a list, you can convert it to a list (if not, you will get an empty list).  If it's a card (a bunch of pairs name / value) then you can convert it to a card; If you attempt to convert a map and it is not a card, you get an empty map.

  In your case, you get a group of pairs name / value.

  Your original code, and then said: "that convert into list, but if it is not a list gives me an empty list.

  The computer says "okey dokey.  I have a card, so here's your empty list. »

  Is that more clear?   The issue is not with JSON.  It is with the information contained in these QVariants pulling.

  Computer: "here's a thing.

  You: "what kind of thing?  (there is a method to get the type that you can turn it on)

  -or - "is this a card?   (there is a routine to check if it can be converted to a specific type)

  Is that more clear?   Allow only JSON for the moment and look at the data you received.

  Stuart

• Update to Firefox 8, falls down and does not connect to a Web site, what do I do?

  Before I updated, I could open, load a website quickly and we were on our way. However, I opened it and most of the time it HANGS after that click on a bookmark or type a site.

  Even when it does not crash, it does not load a Web site. I try another browser and load very well the network Web site is NOT the issue.

  I uninstalled the new Firefox 8 and returned to 7.0. I'm happy for the moment, but this problem is worrisome.

• Photoshop CS3 and Outlook 2007 - cannot copy / paste

  I recently converted to win7 and office 2007.  Under vista and office 2003, I might choose an image embedded in an e-mail, copy it to the Clipboard, then do a file/new in photoshop and paste the image.  Every since then go to vista and office 2007, this will not work.  I can select the image and copy it, but photoshop can not stick.  The Paste command is greyed out.

  I tried the copy and past in Microsoft Paint and that works.  I tried to copy and paste into Paint Shop Pro XI and that works.  I tried to copy and paste from paint to photoshop and that works.  I can not just copy and paste it from outlook 2007 to photoshop.

  Is this another 'feature' of microsoft?

  Therefore, it does not work with Outlook 2007 with Vista Ultimate 64-bit.

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K