CUT, COPY, PASTE and DELETE greyed

Similar Questions

• Save, cut, copy, paste are grayed out in Word 2003.

  I don't know how it happened, but in Word 2003, XP, many menu items are grayed out such as Save As, cut, copy, paste and many other options.  How does this happen, or more important, how can I activate this return?

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cut, copy, paste option not enabled on a Web site. I want to activate these options. How?

  I can't use him cut, copy, paste options into one of the Web sites. I want to activate these options. How do I?

  You can use the keyboard if the buttons on the web page do not work.

  • Copy: Ctrl + C or Ctrl + insert
  • Paste: Ctrl + V or shift + insert
  • Cut: Ctrl + X or shift + delete

  See also:

  • http://KB.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
  • https://addons.Mozilla.org/firefox/addon/AllowClipboard-Helper/

• Help cut/copy/paste

  I v1.2 now on my device, but I have no idea how to cut/copy/paste of text in/from the browser as the update would allow other than the old option available to be only able to do this in the text entry field.  Could someone walk this layperson in how to cut or copy text from the browser?

  While waiting for browser the SHIFT key and tap on a text box. You cannot now select specific words, but only whole paragraphs. If you keep holding SHIFT and affecting other areas it will highlight those as well. Once the desired areas are highlighted in yellow, hold your finger on the gesture next to the button area until it turns upward and holding down struck key C to copy it. A notification will now allow you to know it has been done. To paste press the gesture area and press the v key.

• I want to download a file and do a "save under" directly in my working folder. Instead, it seems to save it somewhere as a generic term should I then copy, paste, and rename manually. Is there a way to rationalize this?

  I want to download a file and do a "save under" directly in the folder of my work. Instead, Firefox downloads somewhere with a generic name I have to copy, paste, and then rename the file. Is there a way to streamline this process simple?

  Options > general downloads section

  • If "Save files" is selected, all files will save the location shown without the intervention of the user.
  • If 'Always ask me where to save files' is selected, the user can choose the location and change the name of the saved file.
  • See-> window Options - general Board

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Copy/paste and or remove the bug

  I have two different questions with Adobe Premiere (CC2015, running on 10.10.3, a lot of RAM), but they seem to be connected. one is to copy and paste, the other refers to remove.

  On a schedule, I'll mark one in and one out, with my tracks marked targets and all other active stocks.

  First of all, let's say I want copy this article and paste in another scenario, all leaving the choice of the original screenplay.  What happens is this: when I go to paste, it will stick in something 1 or 2 copies there.  I'll cancel it, then repeat the same action, and the right bit of the material will stick in.  I used to think maybe it's that I have somehow missed out on the stage of copying, but this happens if I use the keyboard commands or goes the long way and mousing commands in the Edit menu.  This does not seem to happen when I use the elevator or orders, only with the copy.

  On a related note, same scenario - marked inside and out on the timeline, with my tracks marked targets and active all the tracks.

  Let's say I want to remove the section that I scored.  I click on delete and Staples outside the marked area disappear, but the pieces that I've marked stay.  I cancel, then repeat them hitting the delete key, and deleted the correct bits.

  It also seems to be no pattern when that happens - it's incompatible, but frequent.  Workaround seems small, but it is very frustrating to have to make the same edit over and over.

  I tried to clear my cache and delete my preferences, but nothing helped.  Someone at - it suggestions?  Thanks in advance.

  In the example of video you posted, you seem to have a bunch of selected clips, as well as in and out of the points-

  

  In my view, that the selected clips take precedence over the starting points when copying.

  Try it without the selected clips and see if it will copy all the contents of the starting points.

  MtD

• Cut/copy/paste does not work

  I use Adobe Story on Linux running Firefox. When I select cut, copy or paste from the menu, it is said that the menu commands do not work and use the keyboard. I try it with the keyboard and it still does not work. This lack of basic text editing is Adobe Story effectively unusable.

  Thank you.

  If you are facing this problem on Safari, then please go through this link to remove the restriction sandbox on flash player for "story.adobe.com."

  (You must first open "story.adobe.com" in safari before performing the steps mentioned in the link below)

  http://helpx.Adobe.com/Flash-Player/KB/removing-sandbox-restrictions-your-Safari.html

  After the removal of the restriction, charge history. Copy-paste should work now.

• Cannot copy & paste and need to connect permanently to different sites

  I've upgraded from Vista to Windows 7, everything was fine until, after a few updates.  Now I can't copy & paste or same cntr C & cntr v or the computer crashes upward.  I connect permanently to facebook, ebay and Bank cometimes every 5 minutes!  Will you please help or I'll buy just a new conputer!

  Step 1: Run Internet Explorer Performance troubleshooting tool and check if the problem persists. See the article below mentioned the same thing.

  Open the Internet Explorer Performance Troubleshooting Utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Internet-Explorer-performance-Troubleshooter

  Step 2: Follow the steps in the following Article in the Knowledge Base and check if that helps.

  Internet Explorer not responding, stops working, or restarts
  http://support.Microsoft.com/gp/pc_ie_intro
   
  See also:

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Copy-paste and audio between projects - no reading lifting

  Hi all

  Whenever I have copy paste or raise the audio from one project to another (copy, record 1, close to the project, open project 2 paste), the audio works great for this session, but don't always play at the time where I reopen the project later. The audio in the project media / clip selection area will work fine, but when I double-click the clip I pasted in the timeline, the preview window of the clip shows a red field and no sound. Basically, it means I'm losing all changes that I made in project 1 and have to re - insert each piece of audio in the timeline of project 2 and redo my changes. What is the problem? Is there a way I can copy - paste audio editing from one project to another?

  (Edit :) I use CS6.

  Thank you very much

  Josh

  Post edited by: jmclaurin14

  It will not work like that because you're playing it on the Clipboard. What is temporary.

  Usemultiple sequences in the same project instead if you want to do. to changes

• copy paste and same symbol names

  Hello

  I often encountered problems when you copy a clip from one film to the other because the different symbols have the same name. Most of time that happens when I want to copy paste Illustrator shapes for example in an empty movie, clean and then copy it in my film destination. The options to replace the symbols to be in my movie or replace those of my new clip are not very useful.

  The solution would be to either as Illustratior copy graphs in the film, that I'm putting or rename the symbols when they have the same names (which can be very nice work, if you have several). Y at - it an option / a way to make it easier to copy paste the same named symbols?

  Using folders in the Library Manager can do same name symbols work, so do not force you to what either rename.  Before avant de copier copy your movieclip in a new project, make sure that the symbols in the file are stored in an easy to navigate and manage the structure of folders, and then when you import your video clip, at the root of the import library, and there will be no naming conflicts.

• I've lost the ability to right click and cut/copy/paste etc. I wonder why?

  Windows 7 all aplications

  Hi Smiffy,

  Thanks for joining us again.

  I am happy to know that the problem is solved. It would be useful if you want to share the resolution so that it helps other users with the same issue.

• Make a right-click displays (cut, copy, paste) but does not work. Did in IE

  I can't copy from Firefox and stick to the word, as I did in Internet Explorer. It will just paste what I had copied the word before the browsing session. There is an add-in in the word "Person name (Outlook message recipients)", but I don't know what that means if anything on this subject.

  See http://kb.mozillazine.org/Clipboard_not_working

• How to get the do you want to replace these files"dialog box appears in windows 7 (as on xp when cut/copy/paste files)

  I was wondering if there was a way to get windows 7 to look like windows xp then copy and paste files. I don't see the pop-up box asking you 'do you want to replace these files' on 7, I want to see this box and know that 7 will overwrite and copy everything.
  The details of this are, I have a folder with a lot of stuff in there on my desktop windows xp, when I try to copy and paste it on my windows 7 is not to copy and paste all the stuff. I have plenty of hard drive and don't ever see an error message. So why I wonder if the same 7 will overwrite some files. Help, please!

  Hello

  If I understand the question, you want how copy and paste the function works in Windows 7. Please let me know if this is not correct.
  You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.
  I suggest you to see the links and check if it helps.
  Work with files and folders
  http://Windows.Microsoft.com/en-us/Windows7/working-with-files-and-folders
  Copy and paste a file
  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file
  Select multiple files or folders
  http://Windows.Microsoft.com/en-us/Windows7/select-multiple-files-or-folders
  Hope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.

• EditField does not support the cut/copy/paste?

  I added a simple EditField to a screen and can not pull the text selected by the user.  The following code displays the message 'Not copyable' every time.  Yes, the text is selected in the user interface when this code is executed. I use the JDE 4.7 and the behavior is the same on the Simulator and the device (storm).

  ' Public Sub fieldChanged (field field, int context)

  {
  If (! ef.isSelectionCopyable ())
  {
  Dialog.Alert ("not copied");
  return;
  }
                     
  Clipboard cb = Clipboard.getClipboard ();
  ef.selectionCopy (cb);
  Object salt = cb.get ();
  If (salt! = null)
  {
  controller.updateCurrentField (sel.toString ());
  }
  on the other
  {
  Dialog.Alert ("no text is selected.");
  }
  }

  One rookie mistake.  The EditField was loses focus before the Manager listed in my original post was called.  It seems that the selection is lost when the EditField loses focus.  I solved by overridding the method of 'onUnfocus' of the EditField and pull the selected text and place it in the Clipboard.

• Copy, paste and sizing

  I recently upgradedto CS5 and find what was simple and smooth to now be quite a battle of flashing lines frusrating jerky and confusing behaviour.

  How do the sizing of a graph now a day? I get varying results doing the same thing, it is difficult for my old timer brain to figure out.

  Sometimes I drag a corner with the command option shift and works of semi, if I strain my concentration. Sometimes the graphic in the box changes position. And sometimes the framework encompassing adds a different layer to what color seems to be an envelope of distance outside the original color of the fill layer.

  Anyway, I met three different effects, trying to do something that was a wink until I upgraded. I have not yet been successful by changing the size drawing ofan Illustrator in InDesign.

  What I'm missing here?

  Thank you

  Garrett

  It should still work fine. There was a bug that popped up around CS3 on Windows that requires you to hold down the CTRL (Cmd on Mac equivalent) before clicking on the mouse, and I developed this habit. AFAIK this never affected the Macs, but it could not bad to try pressing your modifiers before dragging with the mouse.