copy ssh keys

Similar Questions

• Authorized SSH Keys

  I try to configure authentication using SSH on my ID I authorized keys generated my pair of keys using Puttygen.

  When I go in configure my key allowed, I can't determine what my Public Exponent is supposed to be. Anyone can shed some light?

  Thank you

  Mike J.

  PuTTY has been my favorite client SSH for nearly four years.

  I am currently using a recent version of PuTTY (2 July 2004), and the following instructions have been written for this new version. However, build everything from a snapshot taken in recent years should work.

  The main problem in establishing authorized SSH keys is that only the oldest RSA1 key format is acceptable. This means that you must indicate your key generator to create a RSA1 key, and you need to restrict the SSH client using the SSH1 protocol.

  Here is how you do it with recent versions of PuTTY:

  (1) launch puttygen

  (2) in the group 'Settings' at the bottom of the dialog box, click the type of key SSH1. Also, I would recommend to set the number of bits in the key generated to 2048.

  3) click on Generate... Follow the instructions. The key information appears in the upper pane of the dialog box.

  (4) clear on the 'key' comment editing area

  (5) to select all the text in the pane labeled "Public key for pasting into authorized_keys file" and press Ctrl-C.

  (6) areas of edition of type a password in the "Key passphrase" and "Confirm passphrase".

  7) click "save private key".

  (8) save the PuTTY private key file to a directory that is private to your Windows login (in the "Documents and Settings / (userid) /My Documents" subtree under Win2K/XP).

  (9) launch PuTTY

  (10) create a new PuTTY session as follows:

  Session:

  IP address: IP address of the sensor IDS

  Protocol: SSH

  Port: 22

  Connection:

  Auto-login username: cisco (or whatever connection you use on the sensor)

  Connection/SSH:

  Preferred SSH version: 1 only

  Connection/SSH/Auth:

  Private key for authentication file: Navigate to the. PPK file saved in step 8 above.

  Session: (back to top)

  Saved sessions: (enter the sensor name, click Save)

  11) click Open

  Use password authentication to connect to the sensor CLI, since we do not yet have the public key on the sensor.

  (12) type the following command in CLI and press ENTER:

  Configure the terminal

  (13) the following command in the CLI, but do not press ENTER again (make and type a space at the end):

  SSH authorized key mykey

  (14) right click of the mouse in the PuTTY terminal window... causing material Clipboard copied in step 5 to be entered in the CLI

  (15) press on enter

  (16) type the following command in CLI and press ENTER:

  output

  (17) confirm that the authorized key has been entered correctly. The following CLI command and press ENTER:

  view authorized ssh keys mykey

  (18) leave the CLI IDS. The following CLI command and press ENTER:

  output

  =====

  In my next post, I will finish these instructions...

• SSH keys no longer work after macOS Sierra Update

  Hello, I have a problem to connect my servers with my previously stored private ssh key in file .ssh with terminal commands or third-party applications. I should mention that I activated the filevault during the upgrade process. I see that my passphases are stored in the keychain, but I need to enter my password every time I want to connect to servers.

  Hello Marshall,

  Try to create a new ssh key. I think Sierra includes updated logic crypto and he doesn't like really old keys.

• Import a public ssh key for a specific user of DRAC via racadm?

  Is there a racadm command to download and install a public ssh key into account a specific drac of the user.

  In the GUI, I see features to add 4 different keys per user access from remote devices with the key private without a password for ssh.

  I have not found a command for it in the last iDRAC CLI PDF 7/8.

  I don't see that installed public keys are exported with an export of the server profile which would mean that access would be lost when profile importing. Is this correct? If so is this remedied the iDRAC future releases?

  You can use "racadm sshpkauth" to import or delete the public SSH key users to iDRAC.  You can get more details on the use of race using command "racadm help sshpkauth" or the RACADM CLI guide (link below)

  http://www.Dell.com/support/manuals/us/en/19/idrac7-8-lifecycle-controller-v2.30.30.30/iDRAC_RACADM_Pub/sshpkauth?GUID=GUID-BE12ABD1-4995-4FA3-B090-9CB41321B7A4&lang=en-us

  Importing server configuration file will not delete iDRAC SSH key

• IronPort SSH Keys vulnerability patch

  Hello

  customer is running WSA 8.8.0 - 085. In the web pages of upgrades available, we show the file "vulnerability cisco-sa-20150625-ironport Fix SSH Keys." When you try to apply it, web pages and the CLI, such as suggested by RN, it shows the patch as it has already applied:

  Check if "Vulnerability Cisco-Ironport SSH Keys" patch is required
  Patch 'Vulnerability cisco-Ironport SSH Keys' is already applied
  Facility upgrade is complete.

  I think it's BECAUSE WSA has been upgraded after June 25, a release already includes this patch.

  Question:

  -How can I be sure that SSH keys are ok?

  -Why the patch stay in the upgrades available? Can I delete it?

  Thanks in advance

  Hello

  Thanks for reaching out, here is the link that provide details around this:

  https://supportforums.Cisco.com/blog/12543046/multiple-default-SSH-keys-...

  and what is "why patch stay in available upgrades? Can I remove it? »

  This patch will be deleted once you upgrade to version 9.0.x and now cannot be "off put into service.

  Kind regards

  Zack

• generation SSH key

  I use a 506th PIX.  I already have some ssh addresses, but I need to add a new ssh address.  Do I need to generate a new key or should I use the existing key?  In addition, if there is already a key genereated must cleared and a new generated when new ssh addresses are added?

  skillsadmin wrote:
  I am using a PIX 506e.  I already have some ssh addresses, but I need to add a new ssh address.  Do I need to generate a new key or does it use the existing key?  Also, if there is already a key genereated does it need cleared and a new one generated when new ssh addresses are added?
  

  If you add more IPS that are allowed to connect to the pix using ssh, then you do not generate a new key. The existing ssh key will be used.

  Jon

• VMWare ESXi 3.5U4 - reboot remove SSH Keys

  Hi all

  I have a server ESXi I'm SSH'ing to. I have generated a public/private key pair. I know it is not supported... but I have a need to do so. I followed the instructions on the creation of the server's .ssh directory and put the keys in there.

  Unfortunately, it seems that, after a restart (initiated through the VI Client), the keys were gone, so that any file that was not part of the original installation. I guess is the expected behavior. But, how is it possible solution so that I can continue to connect to the server without password?

  Thank you!

  You can added your SSH keys to oem.tgz to keep your changes, take a look at this page: http://www.vm-help.com/esx/esx3i/customize_oem_tgz.php

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Firmware 1.2.7.76 crash and the loss of the ssh keys SG-300

  Hello

  2 of our 7 switches SG-300-52 updated new firmware now.

  Our preliminary findings:

  -(boring): switch regenerates it of ssh host key on every reboot. If I export the configuration, the keys can be seen, but they are

  apparently not stored and are regenerated each time the switch restarts.

  -(critical): by chance, we connected a port that was part of a port configured without lacp channel (channel-group mode 1) to a nx7k

  the port configured for the lacp Protocol. At this stage the SG-300 stops responding completely, even for the network regarding the serial console. With both sides

  properly configured for lacp, all right.

  The Ruedigerl, the critical part of your post is expected behavior when you connect to a configuration of channel-group incompatibility. Covering tree essentially denounces the switch that requires a reboot. This is true in all switches, including the catalyst series, spanning tree will make a loop and making unpleasant problems.

  -Tom
  Please evaluate the useful messages

• SSH keys are protected by a password that is supported for SSH tunnels?

  Using SQL Developer 4.1 I get an error if I try to connect a SSH Tunnel using a private key that is protected by a password.

  com.jcraft.jsch.JSchException: privatekey: aes256-cbc is not available [B@2ef5d584
    at com.jcraft.jsch.KeyPair.load(KeyPair.java:654)
    at oracle.dbtools.raptor.ssh.RaptorFileIdentity.createIdentity(RaptorFileIdentity.java:26)
    at oracle.dbtools.raptor.ssh.RaptorIdentityRepository.getRepository(RaptorIdentityRepository.java:32)
  
  

  

  I don't see anywhere to enter the password; is it supported?

  Thank you.

  As Jeff said, pass phrases are supported. While your keyfile may require a password, is not what we shifted upward.

  Instead, the problem is that the developer SQL does not support aes256-cbc. We don't specify as an algorithm of encryption supported by trying to open the SSH connection. If the key cannot be used. It is a bug, please add support for additional cryptographic algorithms beyond the default value OF THE used by ssh-keygen and other key generating default tools.

  In the meantime, if you have a control on the generation of keys, you can try using a different encryption algorithm but preserving the password requirement. The only solution would be to create the tunnel outside the SQL Developer and then manually create connections that run through the tunnel.

  -John

  SQL development team

• Copy/paste keys on the missing keyboard!

  Today, I realized that I do not see the copy and Paste buttons on the keyboard more. My iPad 1 Air run 9.3.1.

  

  Is it a bug on 9.3.1 update? did anyone get the same problem?

  I think that you have pressed on it to get the popup copy function

  It's on iPad 2 Air

  

• VPN and SSH key phenomena

  Hi all

  I was in possession of a rather strange problem.

  Description of the problem

  I can't SSH in my ASA box within my network private and the Internet when it is not connected to the VPN without problem

  If I SSH to my ASA box of in a remote access VPN session, I get the error "ssh_exchange_identification: Connection closed by remote host".

  REMOTE_VPN_POOL = 192.168.250.1 - 192.168.250.5/24

  LOCAL_LAN = 192.168.2.0/24

  The strange thing here is that I can't SSH to my device without wire (192.168.2.2), then to my ASA (192.168.2.1) - see the text in bold below.

  The below and paste the job gives a good example of what is happening. Apart from this, the ASA works very well in terms of RA VPN. Any help on how to solve this problem would be greatly appreciated.

  See you soon,.

  Conor

  VPNC: A Linux Cisco VPN Client. Works like a charm most of the time.

  [[email protected] / * / ~] # vpnc - port-local 501 /etc/vpnc/home.conf
  VPNC launched in the background (pid: 15830)...

  [[email protected] / * / ~] # ping 192.168.2.1 (private IP of my firewall)
  PING 192.168.2.1 (192.168.2.1) 56 (84) bytes of data.
  64 bytes from 192.168.2.1: icmp_seq = 1 ttl = 255 time = 8.33 ms
  64 bytes from 192.168.2.1: icmp_seq = 2 ttl = 255 time = 8.09 ms
  ^ C
  -ping 192.168.2.1 - statistics
  2 packets transmitted, 2 received, 0% packet loss, time 1310ms
  RTT min/avg/max/leg = 8.091/8.211/8.331/0.120 ms

  [[email protected] / * / ~] # ping 192.168.2.2 (my IP's private wireless device)
  PING 192.168.2.2 (192.168.2.2) 56 (84) bytes of data.
  64 bytes of 192.168.2.2: icmp_seq = 1 ttl = 255 time = 9,34 ms
  64 bytes of 192.168.2.2: icmp_seq = 2 ttl = 255 time = 8.90 ms
  ^ C

  -ping 192.168.2.2 - statistics
  2 packets transmitted, 2 received, 0% packet loss, time 1248ms
  RTT min/avg/max/leg = 8.902/9.122/9.343/0.240 ms
  [[email protected] / * / ~] # ^ C
  [[email protected] / * / ~] # ssh [email protected]/ * /.
  ssh_exchange_identification: Connection closed by remote host
  [[email protected] / * / ~] # ssh [email protected]/ * /.
  Password:

  Wireless #.
  Wireless #ssh-l conor 192.168.2.1

  Password:
  ************************************************
  * Private system. No unauthorized entry or use *.
  ************************************************
  Type help or '?' for a list of available commands.
  Firewall >
  

  Hey Conor,

  Could you please paste the output of ' run HS | SSH"below.

  Kind regards

  Anisha

• Copy the key frame motion tween properties?

  No there is no way to do it from the timeline?

  I have a layer on the timeline with a MovieClip.  It is set for the motion tween.  On frame 30, it has a keyframe for all tween properties (rotation, scale, position, etc.).  I want to copy those and put them on the frame 1 using the Timeline Editor.  How?

  Probably too late for you, but maybe someone has the same question:

  From animate CC, you can do:

  1. selection of a single image (Ctrl + click) then
  2. do a right click to open the Options Menu
  3. Select 'copy properties.
  4. move to target setting and select 'Properties of paste' or, if you want to just stick some special properties, "Collage special properties.

  

• Carnt activate tried xp home automated custom still work but have a genuine copy with key product

  I can't activate xp home genuine xp home edition try dosent work automated.

  Contact Microsoft product activation to 888-571-2048, they are open 24/7.

  You can also chat Microsoft Support to help validate and activate your Windows XP by using the link below. In the link provided, select the first option "General..."

  http://support.Microsoft.com/contactus/?ws=mscom

• [SOLVED] How to create public keys to ssh to ESXi to another host?

  I have read a number of different sites trying to find information on how to do it properly, but I had no luck.  I'm afraid at this point I'm all mixed up or miss me something simple [painfully].

  My goal is to create keys so that I can ssh/scp, as root, the ESXi server to another server in linux/unix under a different name.  Most, if not all of the sites I found coverage today the reverse: ssh/scp from another machine to the ESXi server.  I assume that ssh ESXi-> another host via keys is possible...?

  I believe that I'm almost there, but in all honesty, I don't know.  Here's what I've done so far.

  • RSA and DSA keys with dropbear created on the ESXi Server
  • convert keys RSA and DSA dropbear ssh format
  • Cat's public RSA and DSA keys in the ~/.ssh/authorized_keys on the server that I would like to ssh/scp
    • even tried to make a copy of authorized_keys as authorized_keys2 on the destination server
    • same CAT had the public keys of the ESXi authorized_keys & authorized_keys2
  • went up to copy the private key (!) from the ESXi server on the server I ssh/scp area in

  In regards to the box, I'm remote in I

  • keys generated with ssh-keygen - t dsa and rsa
  • typed in a sentence
  • CAT had the public key in .ssh/authorized_keys on ESXi box
    • as above in desperation I added it in the file authorized_keys local
    • copied authorized_keys to authorized_keys2
  • copied private keys (!) of the destination inbox ESXi machine

  I tried ssh username FQDN, ssh username@FQDN-l and with the IP address itself, whenever I was asked for a password.  Naturally if I just ssh hostname it trying to connect as root, which is not allowed and will fail.  Again, I apologize because I'm probably all mixed now. might be wise to simply erase all keys & start over.

  Is this possible?

  Is anyone interested in lending a hand?

  Resources

  http://communities.VMware.com/message/1373428#1373428

  http://communities.VMware.com/docs/doc-8890

  http://pkeck.myWeb.uga.edu/SSH/

  http://computerpr0n.com/2011/04/ESXi-remote-management-part-2/

  http://oreilly.com/pub/h/66

  I blogged about this recently:

  http://blog.Cowger.us/?p=15

• Key issue of the external table preprocessor - ssh

  I want an external table that runs a df command in a script

  DFH.sh more

  / bin/df h

  CREATE TABLE XT_df

  (

  SCRIPT_OUTPUT VARCHAR2 (2000)

  )

  EXTERNAL ORGANIZATION

  (TYPE ORACLE_LOADER

  Datapumpdir default DIRECTORY

  ACCESS SETTINGS

  (RECORDS DELIMITED BY NEWLINE

  PREPROCESSOR datapumpdir: 'dfh.sh'

  jump 1

  FIELDS TERMINATED BY ', '.

  surrounded of possibly "" "

  )

  LOCATION (datapumpdir: 'xtdf.dat')

  )

  Select * from XT_df

  And it works.  I see my df output.

  I want to run something similar on multiple hosts, but the same host, so I place another table and call another shell script to run a remote ssh script after I have set user equivalence

  / usr/bin/SSH oracle@remotehost1 ' df-h | grep u02'

  the works of shell script

  However, qualifying by selecting in the external table I get ssh host checking has no error.

  [Error] Run (1: 1): ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-29400: data cartridge error

  KUP-04095: order of preprocessor /winlogs/dfh.sh has detected the error "host key verification failed.

  "

  So what could be the cause that if she works well as oracle from command line, checking the .ssh key is on the other side (I think).

  > Datapumpdir: 'dfh.sh PREPROCESSOR'

  Modify the script above to include the following line as the second line of the script

  env | Tri o /tmp/capture.env

  view the contents of /tmp/capture.env return here after it gets filled