VMWare ESXi 3.5U4 - reboot remove SSH Keys

Similar Questions

• Copy (cloning) a key USB of VMware ESXi

  Hi all

  I have a question about the copy of a key USB VMware (a USBkey VMware is an IBM option (in fact, any major brand for that matter) supported). Lack of VMware ESXi 5 from a USB key using the UEFI. Recently the USB has renounced us, so we reinstalled VMware ESXi5, installed updates and set up the latter again and everything works again fine, but to save time to stop in the future we would like to keep a copy of the USB on the tablet. Is there an easy way to easily copy this USB?

  The following would work? :

  1. stop the server

  2 boot from a Linux live DVD

  3. Insert the USB source

  4. Insert the USB of destination

  5 open a terminal

  6. start: If dd \u003d/dev/sda of = / dev/sdb (after checking admesg | grep like command course)

  7. shut down the pc when done

  8. replace the USB source on the server

  9. starting the server

  Is there anyone who has any experience with this?

  Yep - that should do it

• VMware ESXi 5 of license use key more than once?

  I have the intention to have 12 rackmounts running ESXi, I use the free license key over and over again?

  Yes. When you sign up for the free hypervisor type license you will be asked on the hosts how you install ESXi (for statistics).

  André

• BB10 Simulator on Vmware ESXi

  I'm trying to get the BB10 Simulator to work on a VMWare ESXi server. Here's what I've done so far:

  1. Installed the Simulator on yhe development machine, started VMWare workstation, open the vmx file and downloaded the VM on the ESXi server.
  2. Disabled 3D acceleration on the machine virtual (on ESX) and selected 'Full touch safe mode' after starting the virtual machine.

  At this point, the virtual computer screen displays the IP 'telnet ftp ssh qconn', the axis of the device and the build number.

  The next step is to connect the Momentics IDE to this virtual machine.

  The Simulator is in need of a vmx file configuration dialog box (likely to run vmware specific commands). In the configuration of ESXi, there is no vmx file.

  If I try to connect to the virtual machine by IP address, I need a device password, I did not.

  Someone at - it suggestions on what do I do now?

  In response to my own question because I found the answer:

  Now that I have the IP address, I just follow the steps described in

  http://supportforums.BlackBerry.com/T5/native-development/BB10-native-Cascades-SDK-not-connecting-to...

  Because I had never set up a password for the Simulator, I left the empty password field.

  Copy-paste the details:

  Of your IDE

  -Right click on your project in the Project Explorer

  -Go to Blackberry tools and click on configure target...

  -Click Add new target it... button and enter the IP address of your Simulator in the host name or IP address field, enter your password if you have one then click on finish

  To run your application on the Simulator:

  -In the Project Explorer view, double click on file bar - descriptor.xml, then click on chip Debug Set button to set the author of the application information.

  -Set the configuration of the correct version for the Simulator first by right-clicking on your project and selecting Configurations of Build > Set Active > 4 Simulator-Debug.

  -In the Project Explorer view, right-click the project and select build project.

  -Right click on the project again, and then select run as > BlackBerry Application C/C++.

• IronPort SSH Keys vulnerability patch

  Hello

  customer is running WSA 8.8.0 - 085. In the web pages of upgrades available, we show the file "vulnerability cisco-sa-20150625-ironport Fix SSH Keys." When you try to apply it, web pages and the CLI, such as suggested by RN, it shows the patch as it has already applied:

  Check if "Vulnerability Cisco-Ironport SSH Keys" patch is required
  Patch 'Vulnerability cisco-Ironport SSH Keys' is already applied
  Facility upgrade is complete.

  I think it's BECAUSE WSA has been upgraded after June 25, a release already includes this patch.

  Question:

  -How can I be sure that SSH keys are ok?

  -Why the patch stay in the upgrades available? Can I delete it?

  Thanks in advance

  Hello

  Thanks for reaching out, here is the link that provide details around this:

  https://supportforums.Cisco.com/blog/12543046/multiple-default-SSH-keys-...

  and what is "why patch stay in available upgrades? Can I remove it? »

  This patch will be deleted once you upgrade to version 9.0.x and now cannot be "off put into service.

  Kind regards

  Zack

• LSI MegaRAID Storage Manager on VMware ESXi 4.0

  Hi guys,.

  We tried to install on VMware ESXi 4.0 MegaRAID Storage Manager (IBM x 3550 M2) and it uses Controller RAID MegaRAID SAS 8808E to monitor the hard disk status but could not be able to install and it returned the error as attaché

  We followed the procedure as shown in the following ibm Web site

  1.6 MegaRAID Manager storage system to a VMWare ESX Server

  Follow these steps to install the on a MegaRAID Storage Manager

  VMWare ESX Server:

  1. download the latest MSM to ibm.com

  2 unzip the and copy MSM_linux_installer - 501.01.tar.gz on a USB key.

  3. from the ESX Server, in the console root, type the following command

  to identify the USB device: fdisk-l

  4. type the following command: mount/mnt/dev / {name of the USB device}

  5. type the following command: cd/mnt

  6. type the following command to copy MSM_linux_installer - 501.01.tar.gz in the occupied Palestinian territories

  file: cp MSM_linux_installer - 501.01.tar.gz / opt

  7. type the following command to decompress the package gunzip MSM_linux_installer - 501.01.tar.gz

  8 type the following command to unzip the package tar - vxf MSM_linux_installer - 501.01.tar

  9. replace the directories with the path/opt/disk

  10 tapez./vmware_install.sh to install MSM

  11. Select version of VMware

  a. enter 1 to install Vmware 3.5

  b enter 2 for VMware 4.0 install

  12. Select the storlib option

  a. Enter n If you want to use the Inbox storlib driver

  b. Enter y if you want to install the storlib delivered with MSM

  IBM recommends 'y' is selected for use packed with MSM, storlib by selecting "n" can

  cause some features of MSM does not function properly

  I would like to know if I use the correct version of the Storage Manager Application MegaRAID for VMware ESXi 4.0

  
  

  If not could someone please advise on how to proceed with the installation and troubleshooting

  Please find the file of errors as attaché

  
  

  Greatly appreciate your help

  
  

  Thanks in advance,

  Vignesh
  

  Check if help: vSphere unknown health status ' vSphere ' eMware »»

• Impossible to apply license in VMWare ESXi 5.5.0 after the expiration of the evaluation period

  Hello. I recorded and downloaded VMWare ESXi and VSphere about 2 months ago and got it running on our server.

  Today when I logged with VSphere, he said the trial period is over and I need to get a license.

  I connected to VMWare and checked the download link of VSphere with the binaries for 5.5.0 ESXI and VSphere 5.5.0 and told me that I had not registered for the product.

  I signed up for the product and the files were available and I also saw the license key at the top of the download area.

  I copied the license key and went to VSphere, connected to my ESXi and click on Configuration, feature under license and change.

  I Clicked New Assign will authorize and pasted the license key in the box and click ok.

  Then I clicked OK to close the "assign license Dialog", but it came with and error "an error occurred during the license specified key assignment: license is not valid for this product".

  I tried several times and have not been able to apply the license.

  Help, please!

  Check if you used the appropriate license key. Make sure that you do not vcenter licenses for Esxi host. Error message clearly indicates that the license key is not valid for this product...

  Kind regards

  Suresh

• Is VMWare ESXi 5.5 free?

  
  I installed VMWare ESXi 5.5 and vSphere cleint test lab and what I see is a 60 day trial, how can I get a free version?

  As mentioned André you missed the stand-alone host licenses section.

  If you are too confusing, here are the steps

  To allow a standalone ESXi 5.x (vSphere Hypervisor):

  1. Connect to the ESXi host with vSphere Client.
  2. Click the Configuration tab.
  3. Click licensed features in software.
  4. Click change in the appearance under the license tab.
  5. Select assign a new license key at this host.
  6. Press enter and enter the license key.
  7. Click OK.

• VMWare ESXi 5.5 activation

  Hello

  License activate I can't seem to of my VMware ESXi 5.5

  After call to the support, following KB:

  http://KB.VMware.com/kb/2014574

  By clicking on "Assign a license to the ESXi host" I connect on the profile of my my VMware...

  But cannot activate

  Activate the version 5.5 to pay who knows the procedure?

  Thank you

  

  Unless you already have a license key, register to Download VMware vSphere Hypervisor for free to get a free key. Then follow the steps mentioned in the article knowledge base you will have to enter the license key on the ESXi host.

  André

• Upgrade VMWare ESXi 4.1.0 to Vsphere 5 guests

  Hello

  We are currently running VMWare ESXi 4.1.0, 348481 we bough VMWare vSphere 5 Essentials kit for 3 guests http://store.vmware.com/store/vmware/pd/productID.126843700/Currency.USD/?src=STOREHERO_10Q1_EBIZ_SMBESSENTIALS-PROMO-NORAM.

  What is the procedure to upgrade the VMWare ESXi 4.1.0 to Vsphere 5 hosts?

  Hello

  I have improved my 4.1.x for 5.x ESXi ESXi hosts also 4.x to 5.x vCenter vCenter

  I BL685c blades,.

  our vCenter is a virtual machine.

  Measures

  (1) download ESXi ISO to vmware.com

  (2) Conenct to the host

  (3) select boot from CD/DVD Image at boot

  (4) upgrade selected

  Comments

  http://communities.VMware.com/message/1840472#1840472

  By default, it creates

  Standard switch: vSwitch0

  Management network

  The VM network

  Best practice is to remove the network from the VM. then remove this VM network

  Recreate the motion switch and the VMotion porgrgroup

  Re-create VM networks and interaction with all VM and VLANDIDs networks

• Como leer USB desde virtual machine in VMWARE ESXi 4.0?

  A cordial Saludo a todos.

  Tengo wont in a server the Vmware ESXi 4.0 platform, sober cual tengo una virtual machine en Windows Server 2003.

  Necesito UN por favor me indicandome como debo hacer para leer desde the virtual USB devices help machine Win. Server 2003.

  Desde el client Vsphere, ingreso a virtual machine of the Delcourt config, there are added el driver USB (ver imagen adjunta), pero ahun sigue sin funcionarme.

  Quedo muy atento a sus comentarios.

  Saludos.

  Para aquellos con VMWare ESXi 4.0 Estos his los comandos para fornuis 4.1, the gran novedad 4.1 are el soporte para Máquinas Office USB.
   
  De el addition of VMware ESXi en el sitio of mailing package. :

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4
   
  ESXi 4.1 (change ZIP ESXi 4.0)

  The ultima version available

  A1 knew servidor con VMware vSphere client ESXi.
  Apague (poweroff) todas las maquinas office desde el servidor.
   
  Haga click derecho sober el arbol y poner ESXi a mantenimiento modo.

  UNA vez hecho esto, vaya has the config of VMware vSphere data of the client - datos almacen - almacen click on database "sober" derecho y push-button.
   
  Tenga into account that el anterior are 'SUFFER', haga click en el y luego undergo. Archivo zip en el almacen of data.
   
  El siguiente paso are al por Existing VMWare Server access.

  If ssh without esta en VMWARE habilitada, siga los pasos following in her console server:

  ALT + F1 para as aparezca algo in the pantalla, escriba "sin soporte.

  the root contrasena ingresar

  VI / etc / inetd.conf

  descomentar the line that contains parameters of the SSH los y el archivo save.

  REINICIAR el servidor.

  Ready, con el servidor enable Existing through SSH.

  Comprobacion del archivo:

  esxupdate - package = / vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zipcheck

  If "Check OK", run the change:

  esxupdate - package = / technical vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip

  NOTE: este 'almacen of datos' are el number of su almacen of datos e caso, I can change number, entonces uno el

  LS / vmfs / Volumes /.

  Y ver el number that in su almacen of datos esta.

  Once completed the change, el servidor is reiniciara, por lo that connect acaba con el client of VMware vSphere, quitar el mantenimiento modo y las maquinas office.

  Important note:

  Run USB, las maquinas office debe ser version para el 7 y add el driver USB en the virtual machine if is is in version 4, the fuera Máquina virtual con simplemente haga click derecho in the part superior su version 7 of change.

• Upgrade VMWare ESXi VMware vSphere Hypervisor 4.0.0

  Hello

  Is it possible to upgrade 398348 for the new VMware vSphere Hypervisor, the free version of VMWare ESXi 4.0.0?

  
  How would I go all upgrade without losing the virtual machines that are currently in the data store?

  VMware ESXi hypervisor and share binaries of same exact. It is only the license key that locks or unlocks various features. Then switch between editions is basically just replace the license key.

  Because the binaries are the same for all editions, for example the 4.1 version update procedure is the same too. Just follow the link DSTAVERTS the Guide to upgrade (search for vihostupdate).

  André

  PS: You can also take a look at http://blog.peacon.co.uk/wiki/Upgrading_ESXi_4_to_4.1 which includes the steps of the update

• The upgrade of the host, VMware ESXI 4.1

  Hello

  I am running a host VMware ESXi 4.1. It seems that VMware claims now this product VMware vSphere Hypervisor (am I right?). Was it a name change purely marketing, or they introduce new functions as well? Is VSphere Hypervisor a more recent version of ESXi

  Is there a tool to upgrade VMware ESXi 4.1 for newer versions (no matter if their output yet or not, just wondering about the upgrade in general)?

  Thanks in advance!

  Don't worry, it's all the same. You have the same binary files for all editions of ESXi, it is only the license key that locks or unlocks features. I think that the main reason why VMware decided to call ESXi free edition "Hypervisor" was because many people were confused that ESXi is free or not.

  There are two upgrade options ESXi. For the first, you must have a licensed version of vCenter Server, which offers the "Update Manager". The second is to use the command line utility "vihostupdate".

  In addition, you can take a look at http://www.vm-help.com/esx41/Patching_4.1_with_the_host_update_utility.php

  André

• Problem the appliance USB VMware ESXi 4.0.0-4.1.0

  Dear Sir

  I have a problem for my server to recognize USB devices.
  VMware ESXi is installed 4.0.0 and 4.1.0 and in both cases, these devices don't notrecognize me.
  The machines that I tested on Windows Server 2003, 2008 and even Linux and there nocase.

  Any solution or idea?

  Best regards

  Sebastian

  I had the same problem. You will also notice that there is no power to the USB

  Look at these two links:

  http://www.VM-help.com/esx40i/VMDirectPath/fix_config_issues.php

  http://www.VM-help.com/esx40i/VMDirectPath/USB_Setup.php

  NB NB NB: the host chipset must support the passthrough option

  After you have added all of my usb devices and after a reboot, my local host console was frozen and I could not access anything whatsoever. I did a repair and everything went quickly up and running and will now add each device for passthrough successively. (you will need to reboot the host after addind devices)

  Help file for above problem:

  http://www.VM-help.com/forum/viewtopic.php?f=22&t=2603

• VMware ESXi 4.1.0 and snapshot problem - no disk space

  Hi all

  We now have a big problem with our free space on the disk. We are using VMware vSphere (vSphere Client ver 4.1.0 and VMware ESXi ver 4.1.0):

  Our vm has 2 HDD (500 GB, 1 TB). Now we have only 20 GB of free disk 1 and several snapshot files. To remove the snapshot, we need more than 20 GB of free space (corect?). What we need to do more free space? We can move snapshot files from the first disk to the second disk?

  

  

  Thanks for any help

  concerning

  Dragan

  First of all, you can redirect your new snapshot on another store/disk as explained in this article "http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002929".

  Secondo, you can delete snapshot older and smaller but not all together as explained in this article by Duncan Epping "http://www.yellow-bricks.com/2008/01/07/delete-all-snapshots/."

  Alex