Import a public ssh key for a specific user of DRAC via racadm?

Similar Questions

• Define 'My task list' as a home page for a specific user

  Hello

  As long as administrator, I can not put the default homepage to "My list" for a specific user (at the moment of the user's default home page is a blank page and must be 3 steps to get to "My to-do list").

  I know how to change the home page in the connection of the user, but as an administrator, I do not have.

  Can you help me please?

  Thank you

  Margarida

  Johns suggestion will define Tasklist to the default view for the Application, but you can also set the default application a user sees by connecting to the workspace

  go to navigate-> administer-> workspace settings-> manage preferences

  Select the user to whom that you want to change the settings

  Under Default Startup Options, change the content of the Application and select the application you want for this user.

  Click on finish, and the user will see the change next time they connect.

• How to disable vCenter opens a session for a specific user?

  Hello
  I need to know how to disable the log in vCenter 5 for a specific user.
  Thank you

  Hi Tim,.

  If you use Joulex Energy Manager 3.0.4 or above, you can change the way Sensordata is extracted from SOAP on CIM - please follow the instructions at http://download.joulex.net/doc/3.0.0/html/pages/en/#general/ac/ac_vmware, for example to define the extended property vmware.usegwt = 1 in your vmware hosts.

  Best regards

  David

• Is it possible to configure Dreamweaver to use a pair of public/private key for SFTP?

  Recently, I've been through a lot of effort to set up a new server because my only previous has been compromised somehow notified. I want to make absolutely certain that all Exchange of FTP files or administrative tasks (i.e., SSH) with the server are * encrypted *.  I opened DW CS4 and tried to create a new site where the remote server is FTP and 'use secure FTP' is checked. Unfortunately, this box does not allow me to specify a private key for my communications with the server and I need to activate password login for the SSHD daemon on the server.  Dreamweaver does support key based authentication?  Such a total disappointment if it isn't.

  Hello

  Asked the same question a few months ago by another user, and unfortunately the answer is no, DW does not support this feature.

  If you would like DW to support this in a future version then I suggest that you post a feature request - https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=12. The more people who request a new feature more chances are that it can be implemented.

  PZ

• How can I find the product key for a specific OEM drive?

  Product key for reinstallation question

  I want to reinstall Windows XP on my Dell computer.  I have the oem disc, but it is mixed with the other two provided with two other computers Dell oem disks that were purchased at the same time.  The sticker on my computer displays a product key.  When I do a search for product key on the computer using a program key finder, sometimes with a different product key.  Which should I use and is at - there a way to find the product key on the disc?  Thanks for any help.

  PS. the unattend.txt to disk file is NOT the correct product key.

  If the drive of a Dell computer with the same edition of the OS, then you can use the disc - I think that each of them will have the same key as the one that is currently installed (and that on your sticker)

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with Bios OEM flag only on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows key leans on the motherboard and he sees the flag proper Bios OEM (for the manufacturer and the version of Windows) and activates.

  (B) SLP COA: it's the product key that you see on the sticker on the side, bottom or (for some laptops) in the compartment of the battery from your computer. It's a valid product key, but it should be used only in certain situations (for example, when the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone.

• Make sure that 'tour windows xp' appear again for a specific user

  When I create a new account, a little balloon appears in the bottom right of the screen next to the notification area that says 'Windows XP Tour'. After awhile, she disappears.

  Is it possible to bring it back and make it stay there all the time? How could I do? There must be a registry setting that keeps track of the amount of time since an account was created or how many connections, so how can I change it to always do this prompt? Can I use an editor hex old-fashioned thus.

  I have an old relative who keeps forgetting basic skills such as how to reduce a window, the use of the taskbar and sometimes forget that the large list of programs are now under 'all programs' (although I solved it using the start menu classic.) I don't know what I'll do when she gets a new machine with Windows 8, since this feature has been removed in 7). I'm tired of always prompting you to go to start-> all programs-> Accessories-> windows XP of the Tower, and I tried to add an icon on the desktop. I want just the reminder it so she can click it before calling me for really basic things I taught him a dozen years with his Windows 98 computer. This seems to happen more frequently, and I noticed that she is 'slide' into other things as well, so I'll try to make up for it.

  P.S. I'm not sure which category I should be put under. I settled on "ease of access" because I try to help and an elderly woman in her late 90s access her computer when she keeps forgetting the basic skills. The tour is... temporarily.

  Hi SlickRBCD,

  If I understand correctly you have a problem with guided tour of Windows XP still appearing on specific users. Do not worry, I'm here to help you with this question.

  Let us try the following steps and check if it works for you.

  1. Start the registry (Regedit.exe) editor.
  2. Locate and click the following key in the registry:
     HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Tour
  3. On the Edit menu, point to new, click Dword value, type RunCount, set the data value 1 (one) and then click OK.
  4. Exit the registry editor.

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

  Please answer if the steps do not have hepl, so that we could help you better.

• How to revoke the SELECT on a table for a specific user?

  Environment:
  
  SQL * 3.1 on Windows XP Pro SP3 Developer to connect to Oracle 11.2.0.3 EE on Solaris 10.5.
  
  I have table T with SELECTION privilege granted on this issue both a role and a specific user.
  
  I am using SQL * Developer to revoke the privilege SELECT on this table of the individual user and leave the role.
  
  I can see how to revoke the role by right-clicking on the table and goes to the privileges-> revoke but I can't find where to choose a specific user to revoke of.
  
  Any help is greatly appreciated!
  
  -gary

  Hi Gary,.

  You are probably aware of the SQL syntax of base to make grant and revoke of SQL * more or the SQL Developer Worksheet:

  grant select on .T to ;
  revoke select on .T from ;
  

  To reach the equivalent to revoking of SQL Developer Connection Navigator...
  1. open the connection for
  2 expand the Tables node, and then open the object for table T browser.
  3. click on the grants tab and then, in its toolbar, select Actions->-> Revoke privileges
  4. Select in the drop-down list of the dialog box to remove user Action.
  5 shuttle privilege SELECT from the right back to the left, and then click apply.

  One would expect to be able to do the same thing from say the node under the node for the use of the SYSTEM for other users, but this isn't the case.

  Hope this helps,
  Gary Graham
  SQL development team

• How do the capping of resources for the specific user?

  I'm looking for in the way of the capping of resources on the server for a particular user, I. This girl is the data analyst and it trows on my server a lot of crazy pl - sql code who eats CPU like a cake. I talked to her and she is ok with Cap resources to some extend so that other users do not suffer.
  
  After watching in profiles of boards and few options, I have more it seems like CPU_PER_CALL or CPU_PER_SESSION look like obvious candidates. They impose limits on hundreds of seconds, but I don't understand how can I know how many seconds I have to give him? Let's say for the sake of the argument, I attribute 10 minutes to him but at the same time that it connects, there barely a few people working on the server and the server, it's mostly idling. This kill will stop his session (call) even if there is no other people using this server? I would like to think more in terms of 30% of cpu at any time, or something like that.
  
  Any recommendations on how to address this problem is greatly appreciated.
  
  10.2.0.4
  Linux x 86

  It seems that you might be the perfect candidate for the Oracle Resource Manager. Here is a link to the documentation

• Routing of traffic for a specific user through vpn Ipsec

  I want to route traffic to a specific host on the internet through our external interface (for example, 7.7.7.0/27) instead of the internet connection of the client (for example 9.9.9.9).

  I have already added 9.9.9.9 in the split dns acl so that the road is inserted on the client workstation and a default route on the external interface is defined as follows:

  CISCOASA # run HS | I have the route outside

  Route outside 0.0.0.0 0.0.0.0 7.7.7.30 1

  Nat config

  object obj-InsideNetworks network

  NAT 7.7.7.3 Dynamics (indoor, outdoor)

  No nat

  NAT (inside, all) source static obj-InsideNetworks obj-InsideNetworks destination DEST-Interior-SHEEP inside-DEST-SHEEP no-proxy-arp static

  object obj-InsideNetworks network

  range 10.0.1.0 10.0.255.255

  object-group network inside-DEST-SHEEP

  network-object 10.0.3.0 255.255.255.0

  object-network 10.0.2.0 255.255.255.0

  object-network 10.10.10.0 255.255.255.0

  object-network 10.0.4.0 255.255.255.128

  The static IP assigned to the vpn client is 10.0.4.150 if it is not the scope of the Interior-DEST-SHEEP.  If again I traceroute

  9.9.9.9 when connected, I get the first bond 7.7.7.1 and it stops there.

  Would appreciate any help on this.

  Hello

  If you try to NAT the VPN user traffic when it connects to the Internet through the ASA NAT configuration so that the user should then be

  network of the VPN-CLIENT-PAT object

  subnet 10.0.4.128 255.255.255.128

  dynamics of NAT (outdoors, outdoor)

  Insert the dynamic PAT public IP in the above configuration. You can either use "interface" parameter to use the public IP address of ASAs or insert a detached public IP address that can be used. I guess the Pool of VPN uses the 10.0.4.128/25 subnet.

  You must also make sure you have the following configuration enabled

  permit same-security-traffic intra-interface

  You can check with

  See the race same-security-traffic

  Note that there is another similar parameter that ends in "inter-interface" who used to work for this situation.

  Hope this helps

  Let me know if make you it work

  -Jouni

• Missing shell login, but only for a specific user

  Hi, I have a problem that I can not find a solution after a thorough search of google. I had two user accounts in vista - my account with administrator privileges and a second account for a friend. My system has crashed with BSD and when it restarts it let me access my own account but as soon as the connection is full it does not seem to load the shell and all I have is a white screen with no taskbar. Right click does not work and neither does Ctrl-Alt-Delete.

  The second user account starts ok. By starting in safe mode, I created a new user with administrator privileges and it works fine. From there, I can access my old directories since the damaged account.

  However, I need to restore my own account as soon as it has all my custom settings for the programs that I use, all my outlook etc settings and I don't want to have to spend a lot of time copying old books of account to the new account admin and then set up all the programs again.

  Is there a section of the registry that deals with shells of the individual user where we could become corrupted when the system crashed? I looked through the registry but can only search strings for shots of the opening General session and are not specific to users.

  Any help would be appreciated

  Hello
   
  Method 1.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I quoted an article that explains about system restore in Windows Vista.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
   
   
  Method 2.
  Or you can fix the corrupted user profile by copying the damaged to the new user account settings. See the article below for more information.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I set parental controls on firefox for a specific user only?

  I use windows 7 and firefox 18.0.2. On my PC, I have my Admin account and my account of children. Now they arrive at an age that they are requiring Internet access for projects and so on, I wonder if I can put parental controls on firefox (by add-on?) as I have on windows, while master's log in to their account, firefox only allows access to what I received. In other words, limit the use of internet ONLY for their account, while I'll still be able to use firefox without restriction. I don't want to use another browser that I ' m not as familiar with just so I can put a parental control over everything on this browser. Any ideas?

  It did the trick. You can restrict any program or browser to their liking. Although I do not have someone else (Microsoft...) do it for me, it works as should be for now. Thank you for your time!

• Auto approve IN. for specific users?

  I'm looking into PORPOCHA and I need to auto approve IN. for a specific user, is there some examples that I could look at? I am new to WF.
  
  Thank you!

  Hello

  You must create a rule of holiday for the user for this notification. In workflow administration pages, go to the Administration tab and choose 'Rules of holiday' from there. Create the rule to automatically approve the notifications you want to.

  HTH,

  Matt
  -----
  WorkflowFAQ.com - the independent resource ONLY for Oracle Workflow Development

  Review alpha chapters of my book "developing with Oracle Workflow" are available through my website http://www.workflowfaq.com
  Have you read the blog at http://www.workflowfaq.com/blog?
  WorkflowFAQ support forum: http://forum.workflowfaq.com

• How to use cacls to deny a specific user

  I have forgotten how to use cacls since I always use the GUI. However, I got a file with plans for a surprise party in the public record that I realized I didn't tell user to see. I was coordinating with someone else, who use the same computer, hence the need to be in the public record. Says the person was using the computer when I realized this, so I grabbed my laptop and use telnet to connect (try to use the remote desktop on Windows Professional will start the person at the keyboard, unlike Windows Server and I wanted to be discreet). Telnet being limited to the command line, I had to use these tools. I typed the following command:
  Cacls /?
  and then typed
  Cacls filename /d username

  Yet when I tired to access the file later, I found that all security clearances had been wiped out and the only thing there was the user I wanted to deny with a refusal. In fact, even the admin account has been denied permission until I took possession.

  I wanted to let all other permissions alone and just add a deny for the specific user. Previously, he had the same permissions that created everything in the public folder. What I did wrong and what should I do?

  Instead of modify the permission list, you (deleted) has replaced it (that's why you prompt the warning "are you sure?". When you are finished, there is no user in the access list. The /e switch that would have prevented from happening.

• ACS 5.4 ASA 8.2.5 disable AAA for the particular user

  Hello!

  I want to disable journaling Ganymede + for the particular user. This user is used only for automated (python script) pooling of vpn tunnel ASA (limited command set - permission on ACS) group to verify the number of users authenticated via VPN. The problem is that this user generate a bunch of logs according to authentication authorization and accounting on ACS. Is there a solution, disable Ganymede + newspapers on ACS for this particular user? Maybe it is possible to modify the AAA on ASA to not connect this particular user?

  Thanks in advance.

  Hi Pawel,

  You can create filters collection for that specific user. When you configure monitoring filters & Report Viewer does not record these events in the database.

  Navigate to: Configuration of the analysis > System Configuration > filters Collection > add a filter

  What follows is the attributes that can be used. You must use the user.

  -Access service

  -User

  -Mac-add

  -Nas - IP

  Example: We get several hits of ASA by 'user' and we want ACS to ignore it. Create a filter by using the user. ACS must now ignore any attempt from the IP Address of the NAS.

  Jatin kone
  -Does the rate of useful messages-

• Exclude the specific user to logging of GBA?

  Hello

  .

  My client and I are looking for a way to exclude servers AAA (ACS) for a specific user actions/commands, log if logging continues for other users as AAA clients on devices have been configured with networks:

  .

  AAA accounting-off Ganymede controls +.

  .

  I have found no solution so far, either on the side of the ACS, or on the side controls and aaa IOS.

  .

  (Although it looks like a potential security problem), can someone advise?

  .

  Thank you for your cooperation.

  Yvon.

  Yvon,

  Don't you can't exclude a single user to connect.  Accounting is a global command.

  I guess you probably have a script that generates a large amount of registration data?

  -Jesse