Copy the files to a flash to another drive "after a certain date only.

Similar Questions

• Windows 7 Explorer crashes to copy the files from a browser to another Explorer

  I have a Dell laptop under Windows 7 Home Premium. I had recently opened (2) Windows explorers with the intention to copy some photos recently taken from my camera USB attached in a solutions Explorer to another Explorer. I slipped and fell, copied and pasted and in both cases, Windows Explorer crashes immediately after that I have drop or paste files in Explorer 2nd. I restarted twice but no change. I've been using this method of moving files from this camera and another camera for quite some time without error or incident so what changed, and more importantly, how can I fix it?

  Your timely help in this matter is greatly appreciated!

  Hello

  ·         You did changes to the computer before the show?

  ·         This only happens with photo transfer or any other files also?

  Method 1: Run the SFC scan and check if it solves the problem:

  http://support.Microsoft.com/kb/929833

  Method 2:  Start in safe mode and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not persist in safe mode then, I suggest that you put the computer to boot and make sure that the software or conflicting drivers:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to normal startup by following step 7 from the link above.

  Method 3: I also suggest you create a new user account and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If problem does not persist new user account, then I would say fix you the corrupted profile by following the link below.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  See also: http://support.microsoft.com/kb/976972

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  I have the iso image of the window, and I want to copy the iso file on my hard drive for pen drive to make the bootable USB key in the future. So I want to know that can copied .iso file of window et to make the bootable USB key?

  Discussions were merged.

  Deleted duplicate.

  Hello

  This should help you.

  How to create an Installation USB Flash Drive with an ISO file:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon.

• Copy the files from the flash drive on the hard drive but I don't want to copy the files I already have.

  I have Windows XP.  I have a flash drive with many files that I have on my second hard drive.  I just it copies the files that I have on the hard drive and I don't want to have to sit and answer 'yes' or 'no' question about the replacement of files each time that it recognizes a file duplicate. How do I do that?

  When you see this double prompt or not, are there not a checkbox that says something like "Always do this for all files" or something in that sense?
   
  You can manually copy the files. Here is the CTRL key while you click the files you want and then just drag them to the location on the HARD drive.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Copy the file from one drive to the keyword one another & missing tags

  Hello

  I use LR 2.7.  I want to copy a file from one disk to another disk with the same file name.  I thought that you could drag the file, but it is not copy the file into the other drive, can you explain what I need to do?

  Also, I tried to import the file to another drive, but it does not copy the keyword tags.  Is there a way to do this?

  Thank you

  Barb

  There is absolutely no problem with a lot of files. I think that most people are this way.

  To merge a catalog in another, open a catalog and then-> import from catalog and Lightroom point files to your catalog on the other.

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• How to copy a file from one folder to another?

  Windows 7, my images: how to COPY a file from one folder to another?

  Right-click on the file and drag it to the other folder. Release the button on the right and click on copy here.

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• An unexpected error prevents you from copying the file

  An unexpected error prevents you from copying the file. If you continue

  to receive this error, you can use the error code to search for help with this problem.

  Error 0 x 80070057: the parameter is incorrect.

  This has happened when I copy files from one place to the other.

  It has happened since I started an operating system dual boot.

  David

  Is the drive flash to NTFS, or something else?  Do you have locked or encrypted Flash?

  SFC say at the end?  Did you also run DISM?

• Copy the file into BPEL

  I want to copy a file to both folders and then delete the original file in a BPEL process. The file is large (100 MB), so I don't want to read the contents of the file. In addition, the process is started by another process, so I'll have to do the synchronous copy or read/write.
  Is this possible in BPEL 11 g?

  I also faced the same problem.
  You can use Sync Read to copy the file into the file system. Check the details here:

  http://docs.Oracle.com/CD/E21764_01/integration.1111/e10231/adptr_file.htm#CHDEEDGC

  You need to replace the options in the file JCA that these options are not available in the wizard. Test and let us know if it works.

• Copy the file to a file server location

  Hi all
  
  I have a requirement that I have to load a BLOB/BFILE column from a file server that is not even as Oracle server. I use windows and oracle 11 g 2.
  But I found, every time when I have to load any file/object into the blob column, I need to specify the path of the directory. But in this case, I do not have the directory.
  
  In this regard, I also searched the forum, but did not get a satisfactory answer.
  Is there another way to load/copy the files to a file server location that is not on the oracle server machine?

  You can use

  CREATE OR REPLACE DIRECTORY remote_server AS '\\server_name\path\to\folder';
  

  As long as the account that runs the Oracle server has permissions to this remote location you should be able to read the files there.

  href=" "="">