Micro adapter USB keeps disconnecting when I try to copy the files.

Similar Questions

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Trying to create a bootable Windows 7 x 64 Flash drive. Get the "invalid MS-DOS function" error message when you try to copy the file 'bootsect.exe.mui' of the Windows ISO on Flash drive

  The title pretty much everything said.  I have an installer the ISO of Windows 7 Professional x 64.  I am trying to create a bootable flash drive using these instructions:

  http://www.OSNews.com/story/20795/Installing_Windows_7_on_the_Aspire_One_or_Any_Other_Netbook

  I followed all the steps in the guide without problem.  Windows Explorer shows the drive is NTFS.  I can copy all other files of ISO on the FlashDrive without problem.  Only, I can't copy this file.  I tried to copy it to my hard drive rather than on the flash drive, and it still does not work.

  I tried to create a file with the same name by using Notepad to see if there was a problem with the file name.  I can copy this file on my hard drive flash drive, but I can't always copy the ISO file.

  I am running Windows 7 Home Premium x 64 edition and using a Corsair Flash Voyager 16 GB flash drive.

  Help, please!

  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
  http://www.windowsvalley.com/blog/install-Windows-Vista-and-Windows-7-using-bootable-USB-storage-device/
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  How to install Windows 7 from a USB drive without Windows 7 ISO DVD
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• 42 error code when you try to delete the file

  PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  Please relaunch the Finder , and then try again. If there is no change, restart the computer.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• my recovery disk is full. but it's when I try to compress the files. It shows an error code

  have a Pavilion dv6000 with windows operating system 7. my recovery disk is full. but it's when I try to compress the files. It shows a

  800A01A8 error code that pertains to my web cam / error:

  Required object; Error running Microsoft JScript source

  line 315

  2 tank

  The recovery partition is set by default to have very little free space_and has no negative effect on it or system. However, if you use it to back up files, it could fill to capacity. Do not use for backup. You can also check to see if the System Restore monitors the partition, if so, turn it off. Whatever you do, do not compress the partition. Doing so will serve as recovery to stop working.

• I accidentally loaded a .iso file on my PC and can not get rid of it. When I try to delete the file it says that the file is opened by the system. Also the file created 3 virtual drives like E:, F: and G: __Please let me know how I can remove this .iso

  I accidentally loaded a .iso file on my PC and can not get rid of it.  When I try to delete the file it says that the file is opened by the system.  Also the file created 3 virtual drives like E:, F: and G:
  Please let me know how I can remove this .iso file.

  Try Safe Mode. Repeatedly press the F8 key as the computer starts getting the menu diagnosis. Use the arrow key to select Mode without failure. MS - MVP - Elephant Boy computers - don't panic!

• Process Explorer error BES when you try to browse the files and folders; and Internet Explore AppHangB1 when you try to attach files to download in Windows 7.

  Hi everyone, auggy,

  I really hope you can help me with a problem I have on a single workstation at my office.  It is an accumulation of 32-bit Windows 7 running MS Office 2010 Standard.  It differs from other generations in our office because it is used by the head of the team of our accounts, and so it has a number of custom pieces of software that she only needs access (payroll software, etc.).

  All the basic features of the computers seem to be well, except the two following, and I would really like to help get to the bottom of it.

  (1) process explorer error when you try to browse the files and folders of BES.

  I can call Windows Explorer absolutely perfect and be sailing away on his machine, and then suddenly the process explore will die, with the following error: -.

  Signature of the problem:

  Problem event name: BEX

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d6727a7

  Fault Module name: StackHash_0a9e

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 03e2f944

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I can start windows Explorer, and it will happen again--it's a repetitive event.

  (2) Internet Explorer AppHangB1 when you try to attach files to download

  I think that these two errors may actually be related, like IE (and Chrome as well by the way, this be why I think that the two issues are related) works fine, until I just any type of site where I need to download a file.  This happened in the light, as our Chief of accounts needs to download a flat file in a room online banking software.  What's going to happen (and, again, this can be repeated as needed) is: -.

  (a) you need to click on which will generally be a "Browse" button

  (b) a traditional dialog box opens, but instead which allows you to navigate to the location and select the folder you want, he immediately greys out as if the process explore is falling.

  (c) shortly after, the following error is returned: -.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: iexplore.exe

  Application version: 11.0.9600.16521

  Application timestamp: 53114399

  Hang Signature: ffae

  Hang Type:                                          513

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Signing of additional blocking 1: ffaeadd6649c2780023c6d9ea230850d

  Signing of additional blocking 2: e32d

  Signing of additional blocking 3: e32d1064528f9bd1cbe46cdd0db7b0f1

  Signature of blocking additional 4:0498

  Signing of additional blocking 5: 0498e046eb6db4d68a7cd9b11dab2644

  Signing of additional blocking 6: effb

  Signing of additional blocking 7: effb796b5c1ff7f6708d2722fa7c24bd

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  On auggy recommendation, I've set up a registry key insert that returns the explorer.exe hangs in a dump file, and I am trying to load two reports on SkyDrive - I'll post the URL in this thread as soon as I finished it.

  Can someone help me please?

  Thank you very much!!

  David.

  Hi auggy, Andy,.

  Well... in a way, I am very disappointed, but we will respond to it.

  Andy, I checked and iCloud, Control Panel has not been installed on its terminal, but thank you very much for suggesting it :)

  auggi, when I got back on my colleague's PC, I thought I would test to see if the feature didn't always before considering saving data dumps etc, and it worked fine!

  I left it overnight with instructions for the lady who uses the PC to test this morning and see if it's all workers, and it is still, it seems that the fix does not immediately solve the problem of browser, but there later - maybe after a second reboot or something... very strange!

  In all case, this matter can now be considered closed, so all that remains for me to say thank you very much for your help, you are amazing :)

  All the best, very, very,.

  David.

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• I am logged in as administrator. When I try to move the files from drive c to e drive, I get the message that I have currently not authorized to access this file.

  Administrator permissions

  I am logged in as administrator.  When I try to move the files from drive c to e drive, I get the message that I currently don't have permission
  to access this file.

  As an administrator, I though I had permission.  How can I fix it?

  I've only logged on as administrator.

  Even logged on as administrator, you have not all privileges unless you raise them. This is done to prevent malware to take control of your computer when logged in as an administrator.

  What files you try to move?

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara