Copy the ios from Cisco 1140 AP

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• SSL VPN may be configured on the router from Cisco 881/K9?

  I'm now confused if SSL VPN can be configured on the router from Cisco 881/K9.

  Please someone advise me.

  If Yes, for only 5 users, what I need to buy the license or license is supplied with the router?

  Thank you.

  Yes, and you need a license:

  FL-WEBVPN-10-K9

  License SSL VPN functionality for up to 10 users (incremental), to 12.4 T based only IOS versions

  FL-SSLVPN10-K9

  License SSL VPN functionality for up to 10 users (incremental) for the only based 15.x IOS versions

• Cannot copy the email from the printer.

  Original title: printer will not email to the new computer

  I have my printer hooked up to my new computer I can print OK but cannot copy the email from the printer that I did with my previous

  CPuter I have to use my old computer! Help please

  Hello

  1 Windows operating system you are using?

  2. what happens when you try to copy the printer to enamel?

  3. you receive error messages or codes?

  4. What mail client do you use?

  5. What is the number of brand and model of your printer?

  6. did you check the configuration on the printer options (or help)?

  7. are you able to save the copy of your printer hard disk and the copy of e-mail?

  You can try to save the copy of your printer on your hard drive and try to copy or attach to e-mail and check if it helps.

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• PowerVault MD1000: Attached directly slow to copy the data from storage.

  Hi all

  I have a powervault MD1000 attached to a PE2900 using scsi. When I write for the PV everything is ok, but when I want to read it, for example copying the data from it, he grinds the server stops and usually falls!

  can someone advice could be what the problem?

  
  

• I'm trying to copy the files from my xp on my win machine machine 7 but I have probs

  Well I'm trying to copy the files from my xp on my win machine machine 7 but it see the xp machine but I get make sure that the xp machine allows incoming connections for file sharing

  Hello

  1 did you changes to the computer?

  2. you receive an error message?

  Method 1:

  I suggest you to see the links and check.

  Sharing files and printers with different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Method 2:

  Windows Easy Transfer

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

• 4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

  He was connected/buggy. It is not fixed yet. But it will be.

• Is there a way to copy the capture from one photo to another time?

  I recently re-scanning of pictures that were original scanned a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo in the same folder (which is how to organize my photos), to be able to compare and then copy the metadata from the initial analysis to the latter. As I did not yet all signs or notation, most metadata will contain only keywords. But stored under "Metadata" in the view library, 'Capture time' is also stored, but I can't in any case among the options "copy of the metadata. Is there something that I missed, or is there a work-around somewhere?

  Thanks in advance-

  OLE K

  Hi Ole,

  You cannot copy, but edit:

  In the menu goto of the metadata module library - change the Capture time.

  If you have multiple images selected when you choose this command, you set the active image to what you enter as 'date and time specified' and others will be adjusted by the same increment. Decrement in your case, as I suppose.

  So if you want it to be exactly identical to that of the old scan, you must do it one by one for each new analysis.

  Cornelia

• Copy the data from CollaborateSync to the other pc

  Because Acrobat crashes sometimes, I would like to copy the data from CollaborateSync to a PC Backup. This means that I have shared a pdf with PC A one form I'd like to get answers on the PC B, too.

  I tried to copy the Synchronizer-folder "documents and settings" - folder but I can't get answers.

  What information should I copy can I geht PC B answers?

  Klaus

  Find the file "Workflows" in Acrobat under Documents and Settings folder. It is located inside the folder "Collab. If this file is missing, copy the folder "Synchronizer" will not do anything good.

  In addition, copy "Forms" folder as well.

• Copy the IOS Aironet configuration

  I created a 1041 AP running IOS autonomous. No controller. I have three that I want to copy the configuration of the installation on others. I have the right document, but need someone to help tell me what commands will get my set of AP configuration a FTP'd to my computer and how to copy this configuration back to another model of the same access point. This way I don't have to change a few more settings of the AP instead of starting from scratch.

  Thanks in advance,

  Kirk

  What I am referencing begins under article 20-10

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.PDF

  HI Kirk,

  To copy the configuration of AP to PC, you can run the command below. My preference would be to use tftp instead of tftp.

  copy: the execution of the system-configftp://x.x.x.x/ap.txt or copy running-config tftp://x.x.x.x/ap.txt t
  (where x.x.x.x is the ip address of the tftp server and ap.txt is the name of the configuration file)

  Top of page PC of AP copy, you could use command below.

  copy tftp://x.x.x.x/AP.txt startup-config (where x.x.x.x is the ip address of the tftp server and ap.txt is the name of the configuration file)

  Make sure that you are able to ping to the ip address of tftp to the AP before trying the copy procedure.

  Hope that helps.

  Concerning

  Najaf

  Please rate when there is place or useful!

• How to copy the data from Palm Desktop on a PC running Windows 8.1

  If like me you still find the Palm Desktop data (addresses, calendar, notes, etc.) handy and use it long after throwing the combined capacity and 'sync', you can see this is useful.  I bought a new PC running Windows 8.1 and had problems with data transfer due to a problem as I understand it, which does not exist in Windows XP, Vista or 7 versions.  Here is a summary of a way to easily transfer data from these earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) very convenient:

  (1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Give a user name exactly as it exists in the database from your old PC.  This name will serve as Office Automation to create a folder name of six letters (an abbreviated version of your name) to hold the data that Palm Desktop will turn upward.  Wait a few seconds for this to happen, and then close the application on your new desktop.

  (2) in your old PC you want to transfer data from, find the folder named "Palm OS Desktop" which should exist in 'Documents' under path of folder and subfolders 'Users' as > your subfolder name > Documents in Windows 7 (can also be Vista) or may be under "Documents and Setting" folder in Windows XP.

  (3) in this folder "Palm OS Desktop" search this subfolder of six letters of your name and select this whole subfolder and select 'Copy' or Ctrl-C

  (4) locate the same name of subfolder in your new PC (which will have data zero), delete and then 'paste' the subfolder you "copied" in the exact same location.  If you did it right, Viola!  Your new desktop PC should display all the transferred data, once you open the application again.

  Most of the same procedure works with PC Windows 8.1 (probably also Windows 8).  What I found different is that the subfolder of data created under "Palm OS Desktop} had 7 instead of 6 characters with a"0"(zero), added as the last character.  When finally, you copy and paste this subfolder in the new PC there so rename and add "0" for the Palm Desktop to locate these data.

  I hope this helps.

  Data in XP is located in C:\Program Files\Palm (or PalmOne) \ < your HotSync name truncated > \Backup.

  HotSync for Win8 has been available for quite a while now!  See the post at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop" for instructions and driver downloads.

  Palm Desktop 4.x and 6.2.2 use different database formats - 6.2.2 went to .mdb as an extension.

  Best way to migrate data is to perform a HotSync on the new machine, or use the built-in in Palm Desktop Export/Import option.  Export the addresses and calendar files, and then copy those of the new machine.

  The import option to retrieve data.

  WyreNut

• Another reason to hate the Photos app. I want to put titles on the photos that I put in an album to share with others. I can add titles on my MacBook, but not on my iPad Air. I tried to copy the photos from my MacBook to the iPad, but the titles have disa

  Another reason to hate the Photo App. I want to put titles on my photos in an album to explain what are the images. I can do this on my MacBook, but not on my iPad Air. I tried to copy the album (by airdrop) to my iPad, but the titles disappear. Any suggestions?

  Since the Photos of OSX application, select an image (once it's in an album, not in Moments) and you can add a comment that is visible in the Photos of iOS.

• Need to copy the files from old XP disc in Vista by Doc

  Have the old OS XP disc I need to get the MDC in Vista64.  Drive appears in my computer on Vista and XP security will not read copy the required files to the vista system.

  Hard drive XP started under Vista64 OS, need to copy files from old drive XP in Vista by Doc security on files XP stopped, how do I solve the problem__

  Appropriate files on the old hard drive:

  Check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  MS - MVP - Elephant Boy computers - don't panic!

• error 0x80071ac3: difficult to copy the files from my old, but still working, USB

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

  Hello

  Files that cannot be copied are in bad clusters.

  Try running chkdsk x:/b

  The /B switch will cause the disk check to reassess the bad clusters and try to fix them again.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP