SSL VPN may be configured on the router from Cisco 881/K9?

Similar Questions

• Internet works is not in LAN behind a router from Cisco 881

  My internet does not work in local network that is behind the router from Cisco 881. Here is the configuration of the router.

  Help, please...

  Current configuration: 1478 bytes
  !
  ! Last modification of the configuration at 08:16:12 UTC Wednesday, February 6, 2036
  !
  version 15.1
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname R1
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5 CATz $1$ $ VqnIsAQvFHHnV9E/Q6RMV0
  !
  No aaa new-model
  iomem 10 memory size
  !
  !
  IP source-route
  !
  !
  DHCP excluded-address IP 192.168.1.1
  !
  IP dhcp pool dhcppool1
  import all
  network 192.168.1.0 255.255.255.0
  default router 192.168.1.1
  DNS-server 202.56.230.2 202.56.230.7
  !
  !
  IP cef
  name of the IP-server 202.56.230.2
  name of the IP-server 202.56.230.7
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FGL1539254Q
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  IP 182.73.122.54 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface Vlan1
  IP 192.168.1.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  router RIP
  version 2
  network 192.168.1.0
  !
  IP forward-Protocol ND
  IP http server
  no ip http secure server
  !
  overload of IP nat inside source list 101 interface FastEthernet4
  IP route 0.0.0.0 0.0.0.0 182.73.122.53
  !
  access-list 101 permit ip 0.0.0.0 255.255.255.0 any
  !
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  exec-timeout 5 30
  password vinayak123
  opening of session
  no activation of the modem
  line to 0
  line vty 0 4
  password vinayak123
  opening of session
  transport of entry all
  !
  end

  Hello @[email protected] / * /;

  Thank you for your message. I had a glance on the configuration for you. You used a network as opposed to a wild card mask in your access control list for your NAT statement. This changed the field from the source to 0.0.0.0 automatically, which is going to be does not match your interior traffic and NAT'ing outside.

  To fix this, please run the following commands and test once more.

  no access-list 101access-list 101 permit ip 192.168.1.0 0.0.0.255 any

  Thank you

  Luke

  Please evaluate the useful messages and mark the correct answers.

• Customers unable to browse the internet on the router from Cisco 871 K9

  Hello world

  "I just bought my Version of K9 Cisco router 871 running this flash system image: c870-advsecurityk9 - mz.124 - 4.T8.bin".

  I am trying to configure this router for home use, while I can block a part of Web traffic (porn sites, sites of films because of the children), but I realized that I was unable to apply the access list Match-class version url (http host).

  My major problem is still the base of the router config. WAN has a DHCP IP assignment with the 192.168.1.0 network

  The Lan is supposed to have 192.168.3.0 network. IP addresses seem to be properly attributed but not able to ping on the internet router. Local client also cannot resolve DNS. Here is my cofig file.

  Please help.

  Richard #sh run
  Building configuration...

  Current configuration: 1727 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  host Richard name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  No aaa new-model
  !
  resources policy
  !
  IP subnet zero
  IP cef
  No dhcp use connected vrf ip
  !
  IP dhcp pool Richard pool
  import all
  network 192.168.3.0 255.255.255.0
  default router 192.168.3.1
  domain richardedet.com
  192.168.1.1 DNS server
  Rental 2 0
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  spanning tree portfast
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  DHCP IP address
  Check IP unicast accessible source - via rx allow by default 100
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  IP virtual-reassembly
  automatic speed
  full-duplex
  !
  interface Vlan1
  Description Local network VLAN
  address 192.168.3.1 IP 255.255.255.0
  !
  IP classless
  IP route 0.0.0.0 0.0.0.0 FastEthernet4
  IP route 192.168.3.0 FastEthernet4 255.255.255.0
  !
  no ip address of the http server
  no ip http secure server
  overload of IP nat inside source list 101 interface FastEthernet4
  IP nat inside source map route RMAP-NAT interface FastEthernet4 overload
  The dns server IP
  !
  recording of debug trap
  recording ease Committee.2
  access-list 100 permit udp any any eq bootpc
  access-list 100 permit tcp any one
  access-list 100 permit icmp any one
  access-list 101 permit ip 192.168.3.0 0.0.0.255 any
  !
  control plan
  !
  !
  Line con 0
  richard password
  opening of session
  no activation of the modem
  telnet output transport
  line to 0
  richard password
  opening of session
  telnet output transport
  line vty 0 3
  richard password
  opening of session
  entry ssh transport
  line vty 4
  richard password
  opening of session
  !
  max-task-time 5000 Planner
  end

  Hello

  problem is that you have changed the IP address of the interface VLAN 1 from 192.168.1.254 to 192.168.1.1
  If you need to change by default-router dhcp pool:
  Select conf t
  Richard-Edet dhcp IP pool
  no default router
  default router 192.168.1.1
  end

  NAT is also missing:
  Enable
  conf t
  IP access-list standard NAT
  permit 192.168.1.0 0.0.0.255
  output
  IP nat inside source list NAT interface SA4 overload
  end

  Also perhaps you cannot ping the router console PC because the computer's firewall blocks the ICMP protocol. In windows, I'm sure he is blocked by the firewall. Then you can try ping 192.168.1.1 from the PC and it should work.

  Try above changes and then write me if it works, or so we can make other changes.
  You can also post the output of the commands (if this will not work):
  router: ip road show
  router: ping 8.8.8.8 (it should work if your internet provider doesn´t blocks the ICMP protocol)
  PC: ipconfig/all

• How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

  What happens if they have an older linksys router?

  

  Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

  Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

  Click the log tab

  model # here

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

  192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

  If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

  http://192.168.1.1/

  This allows to connect you to the console of the router administrator and access its configuration screens.

  http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

• "Printer settings not comply with the configuration of the router.

  Hello

  I'm trying to establish a wireless connection with my printer to my computer, but the answer above, "printer settings not comply with the configuration of the router" someone has the solution please. Peter

  Hello

   
  • What is the brand and model of the printer?
   
  You can check this link:
   
  Network printer problems
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
   
  I also suggest you to check the manufacturer support for assistance to correct the settings of the printer.

• How to find the IP address of the router from my computer in Windows 7?

  What is the best way to find the IP address of the router from my computer in Windows 7? I know not how to make using the start > cmd > ipconfig, but is there a way to do it with just the mouse?

  Right click on the WiFi icon or-> LAN in the system tray click on open network and sharing Center-> click on "Wireless network connection"--> details click-> see item highlighted on the screenshot:

  

• Configuration of the router to allow VPN traffic through

  I would like to ask for assistance with a specific configuration to allow VPN traffic through a router from 1721.

  The network configuration is the following:

  Internet - Cisco 1721 - Cisco PIX 506th - LAN

  Remote clients connect from the internet by using the Cisco VPN client. The 1721 should just pass the packets through to the PIX, which is 192.168.0.2. Inside of the interface of the router is 192.168.0.1.

  The pix was originally configured with a public ip address and has been tested to work well to authenticate VPN connections and passing traffic in the local network. Then, the external ip address was changed to 192.168.0.2 and the router behind.

  The 1721 is configured with an ADSL connection, with fall-over automatic for an asynchronous connection. This configuration does not work well, and in the local network, users have normal internet access. I added lists of access for udp, esp and the traffic of the ahp.

  Cisco VPN clients receive an error indicating that the remote control is not responding.

  I have attached the router for reference, and any help would be greatly apreciated.

  Manual.

  Brian

  For VPN clients reach the PIX to complete their VPN the PIX needs to an address that is accessible from the outside where the customers are. When the PIX was a public address was obviously easy for guests to reach the PIX. When you give the PIX one address private, then he must make a translation. And this becomes a problem if the translation is dynamic.

  You have provided a static translation that is what is needed. But you have restricted the TCP 3389. I don't know why you restricted it in this way. What is supposed to happen for ISAKMP and ESP, AHP traffic? How is it to be translated?

  If there is not a static translation for ISAKMP traffic, ESP and AHP so clients don't know how to reach the server. Which brings me to the question of what the address is configured in the client to the server?

  HTH

  Rick

• I am trying to disable the option 'comments' on my wireless internet connection. I was told to go to my configuration of the router, but how do the router on my PC?

  In the past, I have activated the 'comments' option while others may have access to my wireless internet, but now I want to turn it off.  I got to go to my router configuration. How do the settings on my router on my PC?  I forgot how I activated the option.  Thank you very much.

  Hello

  You must contact the manufacturer of the router for the best assistance.

• VPN site to Site using the router and ASA

  Hello

  I have a Cisco 1812 router that is configured for remote access VPN using IPSec (Cisco VPN Client), my question is if I can configure a Cisco ASA 5505 to connect to the router as a VPN from site to site.

  Thank you

  Karl

  Dear Karl,

  Yor are right, in this case you can create a tunnel vpn site-to-site between devices or you can configure your ASA as hardware VPN client. That is to say; Easy VPN.

  For the same thing, you can consult the document below.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Kind regards

  Shijo.

• SSL VPN IP address other than the IP address of the interface?

  Hi,
  
  Is it possibe to use a differnt IP Address from the same Subnet of OUTSIDE
  
  INTERFACE? Instead of Interface IP Address itself. The Idea behind is,
  
  Clients should not use OUTSIDE Interface IP Address for SSL VPN, but whereas they can
  
  use from the IP Address Pool of OUTSIDE Interface.
  Regards

  Brassart Abbas

  If SSL is completed on an ASA firewall, you can finish it on all other ip addresses but the external interface.

  If it is completed on a router IOS, Yes, you can use a different ip address to put an end to the SSL VPN connection.

  Hope that answers your question.

• Site-to-Site VPN breaks after reset of the router

  Hi all

  I have a very difficult problem.  I have a CallManager server on one site (Site A) configuration and IP phones which connect you via tunneling IPSec VPN site-to site to Site B.  WAN link to Site B (cable ISP with IP static) can be a tad bit reliable at times.  Everything worked perfectly, except when the router resets or loses connection at site B, smashing everything.  I have the option tftp 150 defined on the server CUCM on Site (192.168.10.250).  The tunnel is NOT upward automatically after a router loses connection, and once this is the case, it seems that I can't help that can restore full connectivity.  I know I must be missing something, but have no idea what.  The nbar-Discovery Protocol on the external interface of the router on the Site B shows TFTP and Skinny packets go out, but nothing back in.  I can't ping all internal resources on the Site A of Site B.  I'm doing a "isakmp crypto to show his" on each router and it shows the tunnel as being upward.  In order to back up the tunnel, I need to access the router on the Site A with the SDM tool and do a 'test' of the VPN tunnel.  It shows it as inactive, and when I have SDM generate traffic, using the source IP address as 192.168.10.1 (inside the interface of the router on the Site A) and destination IP of 192.168.11.1 (inside the interface of the router on the Site B), the tunnel back to the top.  Yet, even if the tunnel is restored, nothing works as much as to be able to ping site starting tftp from Site A to Site B and Site B.  Any help on this is GREATLY appreciated.  Any suggestions on how to configure a VPN site-to-site-reliable so that if cnnection is lost on one end, the tunnel back upward and devices on Site B can access resources such as on Site A CallManager server.  Thanks in advance!

  Hello

  One way you can have the tunnel come back automatically even if it breaks down is configure SLA monitoring on one of the routers of the site so that it sends periodic pings inside the IP address of the router on the other site. For example, on the Siite to configure it for SLA monitoring of IP than his inside source 192.168.10.1 and making ping inside the interface of Site B interface regularly, 192.168.11.1. Configuration guide, please see the below page:

  http://www.Cisco.com/en/us/docs/iOS/12_4/ip_sla/configuration/guide/hsicmp.html#wp1027188

  About traffic has not managed, pouvez you please paste the result of ' show cry isa his ', ' cry ipsec to show his ' and the configuration of the two routers if possible?

  Kind regards

  Assia

• L2l VPN with public ip of the router and firewall with private IP

  Dear all,

  I have a requiremnt for site to site VPN configuration but the firewall on the remote end is not obtained public ip, public ip address is termintaed on the router. Please find the attached diagram

  LAN--> Firewall - privateip--> router-publicip - ISP

  How can I set up the site to site VPN tunnel, enjoy emergency assistance

  Thanks in advance...

  Mikael

  You can configure static NAT for 1:1 for the SAA outside interface with a spare public ip address of the router address.

  If you don't have spare public ip address, then you must configure static UDP/500 and UDP/4500 PAT on the router and enable NAT - T on the SAA.

• WRT160N v3: unable to connect to the page web configuration of the router with Firefox or IE

  Whenever I try to connect to my router's admin page, I get "the connection to the server was reset while the page is loading."  This happens with FIrefox 11 and started when I upgraded to 8 or 9.  A machine running FF 3.6 does not have this problem; I get right in.  Words IE 9 is "Internet Explorer cannot display the webpage" (after complaining about the certificate has expired).

  I ran Wireshark to see if I could learn something, but everything that I could understand was:

  https handshake was OK.

  First TLS packet is received by the router, which then immediately issues a reset and the connection is interrupted.  I don't know why.

  Has anyone seen this? or I have a setup that is screwed to the top (or router)?

  Then I did a full-on reset. I had tried to get in the Mode of administration, following an article in the FAQ, but the web page came in normal mode, default 192.168.1.1. From there on, I WAS able to make the success of downloading the new firmware from 2010 (v3.0.03). Unfortunately, once I've reconfigured the box to a similar to the previous configuration, I have the same problem: connection to https://10.244.122.1 of Firefox 3.6 works; 12 Firefox (now), it will fail, get the error "reset while page is loading". My last try will just disable the https - I just discovered where I can - and see if it will work. Because it's only on my home network, if traffic to the configuration page is not encrypted it really doesn't matter that much. (I had previously determined using Wireshark happened to reset during the TLS negotiation after the HTTPS had finished). And hell, that worked. So my problem is not resolved, but it is bypassed and I'll mark it closed.,.

• Problem with the configuration of the router

  Hello

  I use the WRT160Nv2 and want to redirect a port, but when I go to advanced settings in the EasyLink Advisor and log on to the router of the page it is not loading properly page.

  Here is a picture of what it looks like:

  http://img201.imageshack.us/img201/9386/BasicSetup.PNG

  What should I do to fix this? And there at - it another way to redirect ports?

  Emil

  Do not use the Easy Link Advisor.  Simply use a wired computer and go to 192.168.1.1, then.  If the same, press and hold the button of reset for 30 seconds then release.  Wait 10 seconds and cycle power to the router.  Reconnect with username password 'admin' empty and check.

• Slower speeds when using the router from Linksys e2500

  Hi all

  Today, I upgraded my internet with Rogers for his new 100u service that boasts 100 Mbps download. I brought the new home modem/router and ran a speed test which gave me a huge 130mbps dl and 10 Mbps to the top. Once I placed in bridge mode and logged my e2500 I can now reach 90mbps dl on speedtest.net (only). BTW, these tests are run on a computer connected to the router. He is not able to manage anything more than 100 Mbps? Maybe someone can enlighten us on that.

  Thank you!

  Prioritzation QoS or media is activated by any chance? Disable, restart and test again.

  Also be aware that WAN and LAN port speed are only 100 MB so may see you the limit of this model of router. Most newer generation routers and ISP modems support 1000 Mb on two ports.