Copy the IOS Aironet configuration

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Copy the ios from Cisco 1140 AP

  Salvation; I'm working on the Cisco 1140 AP which is loaded with a slight IOS. I need to change the IOS in standalone version. I managed to enter the configuration mode and tried to use tftp to copy the IOS to the camera flash. but the Unit periodically (in fact all the 1 minute) attempted to display the IP by connecting to DHCP. even I assigned static IP address, but after a minute, it changed its method to allocate using DHCP, because it says to get configuration from a controller. TFTP works well, but in the Middle, change IP stop the copy process. How can I copy independent IOS for the flash on the camera?

  In my view, increasing the IP address getting timer will leave me to start and complete the process of copy from the TFTP server. But how can I do this? is there a solution to stop the device to periodically change its IP address? TNX.

  Here are a few links that explain the conversion:

  By using a TFTP server to revert to a previous version

• IOS XR. When absolute refpoint is created in the primary persistent configuration file?

  Hi all

  Can someone help me understand during the creation of the absolute refpoint and what determines that a certain place in the persistent configuration file becomes an absolute refpoint?

  The foundations of the IOS XR States that 'an absolute refpoint is the configuration of the router at any given time. Engage
  "refpoints are the files of different validation that are created for each commit. But at what point? I would like to know that in the case for example to do a restore to find out where my absolute point (namely the IOS will be restored when starting) vary his place in the persistent config or not?

  Thank you!

  Hello vadym,.

  feels to me that it is a little more complex way to explain the validation database in this book.

  every time a commit is done, the configuration of this set is stored as an id validation (or label if provided). This gives then a check point in time which allows you to return to for example.

  the validation database can contain 100 changes.

  the complete configuration is always available at sysdb. (the database system).

  Cheers!

  Xander

• The 1310 AP configuration and IOS

  I have two 1310's

  the info for A is:

  Product/model number:	AIR-BR1310G-A-K9-r
  Software system Filename:	C1310-k9w7 - tar.124 - 3 g .JA1
  System software version:	12.4(3G) JA1
  The boot loader version:	JA4 12.3 (2)

  the infor for B is:

  Product/model number:	AIR-BR1310G-A-K9
  Software system Filename:	C1310-k9w7 - tar.124 - 3 g .JA1
  System software version:	12.4(3G) JA1
  The boot loader version:	JA4 12.3 (2)

  I'm trying to create a bridge root bridge of relationship and I'm out of luck.

  they are on my desk in front of them, I tried different cisco configs and radio, keep going down.

  I tried express setup (where it requires an SSID) and a manual configuration (where the SSID is not required since I DO NOT NEED to a SSID for a simple communication from gateway to gateway).

  ex: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

  These two will link two buildings and each will have a switch on the other end.

  simple enough no VLAN etc.

  I begin to suspect the IOS versions that I can't find these versions of IOS in all documentation I looked for examples of configuration.

  This AP is very popular for use in severe environments as an AP not a bridge also to some bridges, you can use an omni antenna if the 1310 is the root for a mutiple no roots or the builtin antenna may not meet remotely you need and you can use a Yagi or dish for the link.

  If you use a single antenna, you will have to change it in the config you use right/primary only antenna. If you do not do this, try using the left/secondary antenna AP and the connection will fail because of the lack of an antenna, your other choice is to put an antenna on both connectors and not worry.

  There isn't that one radio, based on the communication software will pass the exit to the righht or left antenna if diversity is enabled

  the builtin antenna is vertically polarized so you shoud in stall the Yagi with vertical polarzation is polarization normal if you follow the antenna installation instructions. There is normally an arrow and the word to indicate the orientation of the antenna.

  Each AP may be at the root, don't forget to ecre evidence all coaxial connections.

  Yes, you learned that the tree covering weight works.

  Good luck

  Bill

• Copy the additional hardware ESX configuration

  I need to add a third server to my group, but don't want to redo the config together again

  Is there a simple way to copy the existing configuration / restore?

  Article of the 1000761 - ESX Server Configuration backup and restore process

  again considers the failed server, would it be the same least some steps?

  SEB

  Hello

  Usually people write a script to do the configuration for you. If the server you are restoring to that is an identical server, then you should have no problem, but if it is a new type of installation and configuration of server is your best approach.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• Another reason to hate the Photos app. I want to put titles on the photos that I put in an album to share with others. I can add titles on my MacBook, but not on my iPad Air. I tried to copy the photos from my MacBook to the iPad, but the titles have disa

  Another reason to hate the Photo App. I want to put titles on my photos in an album to explain what are the images. I can do this on my MacBook, but not on my iPad Air. I tried to copy the album (by airdrop) to my iPad, but the titles disappear. Any suggestions?

  Since the Photos of OSX application, select an image (once it's in an album, not in Moments) and you can add a comment that is visible in the Photos of iOS.

• Copy the iPhone in 'portrait' via Apple TV on screen?

  Hello

  For a friend with a sight problem, we bought a 32 "widescreen, able to turn the Portrait and landscape. It's an ASUS PA328Q

  The idea is to let him see his iPhone in Portrait mode. Then it would be independent of read her SMS, emails, see icons, etc.

  With Apple TV (3rd generation) and Airplay, image rotate.

  Do you have an idea to solve this problem in one way or another?

  Thanks to him,

  Franck

  If I understand your intent, you want to create an iPhone large format to deal with sight problems?

  The only concern I would have is how having large copy of the screen without actually being able to hit the big screen.  Have to look at the big screen then look back a little and found the same touch task would be confusing to me.

  You have fully explored all the built-in features of the iPhone: the iOS - Apple Support using accessibility features

• copy the address book to new computer

  Hi all. I have a Mac Pro 1.1 running OS X 10.6.8 and a Mac Pro 3.1 10.9.5 running. I'm upgrading to an iphone 4 to a 6 s more. I have serious duplication of notes, contacts, and calendar for the last 5 years issues. My iphone 4 has hundreds of dups of the contacts and notes that would not remove for nothing. So I went through all the notes and contacts and all the destruction, updates, etc. in the old mac pro (which can't go beyond the current OS X), and cannot load the latest version of itunes to connect iphone more than 6 s. So, I'm in a bit of a bind to get the new phone in place. My thought is put in place the new phone on the newer computer as a new installation, so not to risk the old corrupt Info more back ups on the old computer becomes a problem. But since I can't (even if I wanted to) connect the new phone to itunes of the older for synchronization computer, I would like to copy the address book complete, all notes, and calendars of the old mac pro, place items to the appropriate locations on the 3.1 mac pro thus having immediate access to all of my calendars, contacts and notes in order to sync/upload their new phone with ios fresh install it. I have some info in contacts, notes and calendar for the new mac pro communities, but don't mind deleting all the old mac pro news. So, I'm looking most of convemient and precisely to transfer such info from old mac pro to new mac pro to have available for my new phone.

  Sorry for the long question, but I try to be as complete as possible in order to get the best help possible specific to my question.

  Thanks in advance.

  You can share messages, calendars and Contacts under Snow Leopard. If you have stage 2 verification enabled on your Apple ID, you need generate a password for specific application to Mail, iCal, and address book. Apple ID - manage

  ICloud - book and iCal Snow Leopard

  ICloud Snow Leopard - iCal

  ICloud Snow Leopard - set up email with Mac OS X 10.6 or iOS 4

• open copy vs ios spreadsheet numbers App

  I have set up several excellent spreadsheet to transfer in the iOS app via iTunes numbers.  Numbers gives no option to "open" the files, if their file type is of numbers or Excel.  But... I can "copy".

  Is 'copy' the newly darkened Word for 'open' in the application?  for example, to 'copy' a spreadsheet to open it?

  Hi Donot,

  'copy' is what you will do. When you keep the files in icloud you would open the file and it would keep synchronized on your devices. I like to keep my local worksheets so I'm back copy with iTunes. When I want to send a file back to my Mac, I have replace the file in iTunes and then save it from there on my Mac, by overwriting the file there. Changes on the Mac loaded into iTunes, overwrite the file and before that I have copied to iOS I delete the original or I'll have numbers and Document numbers Document 2 on the iPod. A little complicated but the price you pay to waive the 'transparent' iCloud experience.

  Quinn

• Cannot copy the email from the printer.

  Original title: printer will not email to the new computer

  I have my printer hooked up to my new computer I can print OK but cannot copy the email from the printer that I did with my previous

  CPuter I have to use my old computer! Help please

  Hello

  1 Windows operating system you are using?

  2. what happens when you try to copy the printer to enamel?

  3. you receive error messages or codes?

  4. What mail client do you use?

  5. What is the number of brand and model of your printer?

  6. did you check the configuration on the printer options (or help)?

  7. are you able to save the copy of your printer hard disk and the copy of e-mail?

  You can try to save the copy of your printer on your hard drive and try to copy or attach to e-mail and check if it helps.

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• Error: "Setup cannot copy the NTLDR file" installation of SP3

  original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.

  Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
  Everything is going very well until a "Copy error" window saying:
  "Setup cannot copy the file ntldr.
  It gives 3 options
  1: "Retry" (does not work)
  2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
  3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
  Any suggestions?
  Thank you

  PS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
  No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".

  Information on the machine:

  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
  Language: English

  System manufacturer: Dell Computer Corporation
  System model: OptiPlex gx270s
  BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
  Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
  Memory: 1022MB RAM
  FG 0, 015 M/b: Dell Computer Corp.
  Chipset: Intel i865PE
  NorthBridge: Intel i865PE
  SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
  HARD drive: Maxtor 6E040L0
  AGP: ATI Radeon HD 2400 Series

  You can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.

  Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Setup cannot copy the c_20936.nl file during the installation of additional languages

  original title: Setup cannot copy the file c_20936.nl

   

  I have windows xp sp3 and try to install additional languages, East Asian and I get this error on copy. "Setup cannot copy the file c_20936.nl. Make sure that the disk in the Windows XP Professional CD is in the drive selected below, or provide the location where the file is located. "Copy the files: D:\j386. Need help, what can I do, I have the correct cd in the cd drive, but I get the error of copying.

  Hello

  Step 1:

  I suggest that you try to copy the folder i368 on the computer, and then try to install it from there and check if it installs.

  Step 2:

  Follow the steps mentioned below.

  a. Click Start and then click Control Panel.

  b. double-click regional and Language Options.

  c. click on the languages tab, click details and then click Add.

  d. under input language, add the language that you want to use.

  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.

  Check the links below.

  List of languages supported in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/292246

  How to add and enable additional languages in Windows

  http://support.Microsoft.com/kb/177561

  Download languages for Windows

  http://Windows.Microsoft.com/en-us/Windows/downloads/languages-XP