Copy to a micro usb flash drive

Similar Questions

• How to copy files to a USB flash drive - it would be a version of Windows XP Home Edition 5.1 to/for a Windows Vista laptop?

  How to copy files to a USB flash drive - it would be a version of Windows XP Home Edition 5.1 to/for a Windows Vista laptop?

  Via Explorer - copy / paste
  If the data files are the windows version does not matter

• How to copy music to a usb flash drive files

  Copy music files help

  I want to copy windows media on a cruzer music files.  I can't understand how do.  Can anyone help?

  It dosnt' work this way.  I tried.

  ==========================
  What happens when try you it?

  Watch the video at the following link:

  # 1... Adding files to your flash drive... click laft "Vista".

  How-to videos for SanDisk USB flash drives ted/1
  http://KB.SanDisk.com/app/answers/detail/A_ID/3170/Rela

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to copy video to imovie on a usb flash drive

  How to copy video to imovie on a usb flash drive

  You can share the project as a movie on your desktop, and then drag this movie in your flash drive.

  If you want to copy a project from iMovie on your drive, do you this by creating a new library on your USB key, and

  then copying the project of the new library.   Go to the Help menu and type 'work with several libraries' and you

  instructions on how to do it.

• Laptop HP 15-R084NG: is it possible to copy a HP recovery on another USB flash drive support?

  Hello.

  Just a few questions please:

  1. when I do only once "HP Recovery Media" to a USB key, I can then 'copy' and 'paste' on another USB flash drive as long as the 2nd flash player has sufficient capacity?

  The recovery still works well?

  I ask this question in case I have to change to another USB flash drive and I am aware I can only have a copy of the HP recovery.

  2. If this is the case, I then can also make a backup on a Western Digital external drive so that in case of malfunction of the USB flash drive, can I still transfer files to another USB flash drive?

  Thanks in advance for the answer.

  Best regards.

  Hello

  Copy / paste do not work. Please, try the following method:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/this-is-how-to-make-a-2nd-set-of-recovery-disks/TD-p/1694703

  Kind regards.

• Some USB flash drives REFUSE to work in this 40TL963B

  Hi all. I recently bought a new 40TL963B and so far I have found nothing wrong with her.

  Except that... when I listen to it all the Satellite channels, I noticed thay were very different from my FreeSat box. Duplicate the layers, randomly arrested... etc. It made me want to not use the built-in satellite feature.

  However, I found a program called ToshibaEdit which allowed me to manually change all the digital channels on the TV. Grand... I though. Until I met this problem-->

  Inorder to change the ads, you must copy the TV channels on a USB flash drive, you can edit them on your PC. Now, it took me AN HOUR to do, because of two flash readers I used, none of them worked... I kept getting a "Write Fail" error. WTF?

  The disks are formatted in FAT32, one is a 8 GB is 2 GB.

  Finally, I tried an external 2.5 "USB 120 GB hard drive. Even if the disc is defective... This WORKER. I expect flash drives to work, to be honest, but all of them... the external USB hard drive worked.

  In any case, I spent another hour sort channels, until I was ready to transfer the data back. And. Yes... the same problem. This time, I received an error "failed to read". Again, tried the external USB HDD... worked the first time.

  Now, this HARD drive is faulty, so he'll be thrown... so I'm going to need a flash player to do it again if something happens.

  And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE? In addition, the same flash drive that I tried to copy the data from digital channel with was also used for a backup of the Firmware... and it WORKED perfectly. It works also for use with the media player.

  While this TV has a hatred of Flash drives all of a sudden?
  Anyone can shed some light on this?

  In addition, very quickly, TV seems to lose its TV settings every time that I bring the TV out of Eve. I'm going to the TV Dynamic and adjust all the settings, but he returned to AutoView and all settings back to 0. Is it a fault or is there something I need to do to 'save' the settings per channel?

  Any help at all will be appreciated greatly.

  Hello

  > And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE?

  AFAIK the 40TL963B TV supports a common HS USB 2.0 interface and memory flash can be formatted in FAT16 or FAT32 file system. So there is no specific requirement for USB flash memory

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• P7-1414: can I transfer discovered DVDs onto a usb flash drive

  Hello

  I have already created a set of discovery Sys. DVD, but I would like to transfer these DVD on a usb flash drive.  Can I do this because each pc can only do 1 set of discovery sys.

  Thank you

  WND

  vnt519 wrote:
  

  Hello

  I have already created a series of inaugurations DSys. DVD, but I would like to transfer these DVD on a usb flash drive. ...

  Hello

  You're probably talking about Recovery DVD. No, file structure will be the same and you can't use the USB to retrieve the machine. You may be able to make a second series of DVDs for backup by sector-by-sector copy.

  Kind regards.

• TouchSmart HP ENVY 15-j009wm: TouchSmart HP ENVY 15-j009wm does not read USB Flash Drive after Downgrade to Windows 7

  I've demoted installed Windows 7 with Flash Drive but I need help. Windows 7 doesn't read my Flash drive more? He can read my USB keyboard but does not read a USB Flash drive.

  I have no Internet on the computer, so that means I can not update my drivers. And I have a few drivers in my flash drive I want to install, but I can't.

  I read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td...

  It not me any more because I can't access my USB drivers

  Hello:

  Looking at your other posts it seems that you have yourself painted in a corner.

  Since there is no inheritance or the setting USB auto in the BIOS, your only option would be to remove the hard drive, then put it in a USB drive enclosure sata hard laptop, plug in another PC so it can be read, download the drivers there, you need and copy to you user profile on the hard drive removed.

  Chapter 5 maintenance manual provides the procedures of withdrawal and replacement for the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03733656

  Reinstall the hard drive, run the drivers, and you should be good to go.

  These would be the drivers you need for your model...

  SM bus controller: install this first and reboot.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  USB3: Install these two and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

• Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive

  I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs?

  To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

• Scan photos and 600 dpi tiff and save them to a USB flash drive

  I want to scan pictures and 600 dpi tiff and save them to a USB flash drive, but won't my canon mg6220

  Let me bad format.  Any ideas or suggestions would be greatly appreciated.

  Thank you, Fred

  Hi fredno,

  If you scan directly on the USB key using the Control Panel, you are limited to the use of JPG or PDF format.  To analyze the TIFF, you will first need to analyze the images on your computer, then copy them to the USB key.

• USB flash drives do not work

  Hi all

  I have a couple of USB flash drives. I recently got a new computer and none of them work. They work on a computer with Vista and a Macintosh running leopard OSX. I tried to install the drivers for them, but they do not work. I tried to uninstall the from Device Manager, but they don't always work. Also, one of them appears SOMETIMES (very rarely) and when he does works incredibly slow and unresponsive so. I searched the internet for each method I can find, but nothing yet. And they work very well on other computers. Can I use bluetooth USB and a USB mouse and pregnant too much work, but the sticks of memory will not work. Also do they not appear on Device Manager. I have Service pack 3 2002 edition came with the computer.

  Hello Hasan516,

  Thank you for your message.  Have you tried formatting of thumb drives?  If you have data on them, you will need to copy these data to a computer first.
  If you can see the drive but not access it under XP:
  Open 'My computer' > click the drive and select "format...". »
  When the Format window opens, scroll down the "NTFS" file system, and select 'start '.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP v210w - 32 gb USB Flash Drive Urgent help please :(

  Hello..

  I have a HP v210w 32 Gb USB Flash Drive.

  I was copying some stuff on it and all of a sudden it stoped working!
  I tried to open it, but it is said that the partition is not accessible and the media is write protected!

  

  I tried to format it, but it does not work! He said that the disk is write protected!

  

  I thought it was damaged but when I opened the Disk Manager, he was there, healthy and active!

  

  I tried using "HP USB Disk Storage Format Tool", and it has detected, it failed to format

  

  I also tried to use partitions such programs as 'MiniTool Partition Wizard Professional Edition' and 'EaseUS Partition Master' and they detect it as an active reader and healthy! and I can delete it's drive and recreate it, but nothing happens after the application of changes!

  

  What is the problem with my Flash drive?
  I have it only 8 months ago

  is there a solution or hope to fix it and make it work again?

  Hello Meleha,

  Try this to see if it helps.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download

  This version corrects HP usb readers that have read-only problem (unable to write to the USB because it says as its read-only).

  USB Flash Driver Format Tool (Ufix-II) is supposed to be the fix more successful by both programs.

  You might need to 7 - Zip installed to extract the .rar file if Windows cannot open it.  It's a free program.

  http://www.7-zip.org/

  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

• In Windows XP Home edition USB Flash drive

  In order to manage the partitions on a hard disk in Windows XP Home edition, I use disk management, which allows me to set sizes of partition and DISKPART, which allows me to CLEAN the MBR or the whole disc. No idea why I need both.

  However, when I insert a USB flash drive, partitioning options are not available everywhere, either by right-clicking on it in disk management, or by typing SELECT DISK n in DISKPART, which tells me that the drive number is invalid. A number of the disk that I copied from disk management.

  How can I configure WXP as I want to repartition my USB?

  Hello

  We cannot create a partition on a USB flash drive in Windows.

  See the following articles for more information about disk management and Diskpart.

  Overview of disk management
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_diskconcepts_02a.mspx?mfr=true

  Disk management
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_disk_admin.mspx?mfr=true

  Disk management
  http://TechNet.Microsoft.com/en-us/library/bb457110.aspx

  DiskPart
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Diskpart.mspx?mfr=true

  A Description of the Diskpart command-line utility
  http://support.Microsoft.com/kb/300415

• Presario v3000 think usb flash drive is a CD-ROM/dvd-rom; recognizes any CD

  Presario v3000 running XP PRO sp3

  Hello

  My CD-ROM/DVD-ROM drive disappeared from the Manager of devices and Windows Explorer about 2 weeks; I tried all the fixes the base of knowledge without result. When I put a CD in I can hear it running, but nothing happens, even when Windows says it's looking for a CD.

  However, when I put a Flash drive on a port USB, "reader of CD/DVD-ROM" appears in the device, Manager who think that Flash is a CD-ROM/DVD-ROM called drive'Sandisk U3 cruzer Micro USB device'.  Dev man lists the Flash exactly in the same way under ""hard drives "; " under "Bus USB controllers ' it is listed as'USB mass storage device'.

  Even with the USB flash drive, "'my computer ' still does not show aCD-ROM/DVD-ROM drive, but it puts a CD icon next to "U3 system", which he calls"(e) ". "

  Here's what looks like 'My Computer' in Windows Explorer:

  (drive icon)   + Local Disk (C:)

  (drive icon)  + HP_RECOVERY (:)) d )

  (cd icon) System U3 (e :)) )

  (drive icon)  + PKBACK #001 (f)

  I am so very confused and mentally exhausted.  Can someone please help me straighten this mess?

  Thank you...

  Liliane

  PS my BIOS says for what it's worth, that my OS is Vista, when in fact it is XP PRO!

  Try this:

  1. click on start

  2. click on run

  3. type in diskmgmt.msc

  4. in the lower pane, scroll down until you see your device

  5. right click, choose paths and change the drive letter

  6. click on edit

  7. change if necessary

  Hope this helps

  Restart the computer and check to see if the same thing happens.

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.