Correct settings for HDV capture

Similar Questions

• Need to correct settings for Verizon wireless on Outlook Express.

  Original title: outlook express

  I need the correct settings for outlook express. I'm using win - xp os.my provider is verizon wireless.

  I know not e other information you need to help?

  dry75

  Search on the website of verizon wireless. Or contact them

• Export issues of sequences with the correct settings for DVD

  Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.

  I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.

  So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.

  I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!

  Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.

  I appreciate your help,

  Danielle

  Time of export will vary widely, depending on at least these factors

  1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?

  2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing

• correct settings for two networks?

  I have a desk that has a building at each end of the city.  I have a wireless bridge that connects the buildings.  Each building is on its own ip configuration and has its own internet connection.  I have a server for A construction program.  I want to be in the B building clients connect to this server, but still use internet and print to printers on their own network.

  Right now the wireless bridge has the same addresses as a. construction I also fooled with assignment of two for each clients network adapter ip addresses.  This works fine, except that I see only computers B building in the Working Group, and I don't know if its using internet of B building or A building.

  Building A uses 192.168.5.x - 255.255.255.0 - 192.168.5.1

  Building B uses 192.168.10.x - 255.255.255.0 - 192.168.10.1

  Any help is appreciated, and I can give you more information if necessary.

  Hello

  I don't know what hardware you are using specifically. Regular Bridging could not do you need a device for routing between two independent

  Networks that are on a different subnet.

  If the two networks are bridge successfully to act as a coherent networks (same subnet), choose which Internet connection would be used by each computer can be made by assigning static IP addresses and gateway entrance to TCP/IP on the computer the IP number of the router as the Internet should be used,

  Passing by the details beyond the scope of the forum of support to end users. If the above do not help, you should get a consultant on-site.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Please guide me through correct settings for printing from lightroom 4?

  Im working from Mac OS X Yosemite and my new printer is Canon MG7520.  I can't take a picture to look good for the life of me please help with a step by step instructions?  Thank you very much!!!

  Amateur photographer.   color management need help on how to turn off lightroom or printer to handle the color.  I read a ton of web content, but still having problems.

  On this printer, I don't think there's any icc profile, let the printer manage color.

  Don't forget when you view your photos on the screen to your monitor up to 25% of brightness for editing photos esp for printing

  In addition, it is easier to match the printer brand and the brand of printer paper

• Need to correct/Optimum settings for number of Skype Desktop Client

  Hey all,.

  I tried this ad in the forums/section Skype number and I do not have a unique answer, so I'll try here.

  Here's my dilemma, I have a phone number, that my mother calls me on the United Kingdom more in the USA, I had Skype Setup, so if she called, he went to auto return after 1 second to my landline, but a week later a group of Skype, I'm actually a call 'mass', and which is too from my PC to my landline.

  It's something I don't want.

  How can I have my installation of Skype, so if my mom calls the number, it is the Skype to landline, BUT, if the Skype Group calls, it just goes to my Skype and if I don't answer, I do not answer?

  Is this possible with the current version/settings on the application? Or I expect too much of the application and I need to leave the Skype group I am?

  This topic has now answered in my original post.

  http://community.Skype.com/T5/Skype-number/need-optimum-correct-settings-for-Skype-number/m-p/420921...

  Apparanlty is a global settings and get a call, no matter if client Skype or number, will get on.

• Audio sync HDV capture error

  I have problems with the audio sync issues capture.

  I put the project settings for HDV 1080i30 (60i) - I accepted the default settings of the preset, I pointed the gun in the remote

  I have captured two clips... every ~ 20 minutes maximum.  Both have audio sync issues.

  The two clips captured images that included an empty staining in the band... ie. timecode was reset when I removed the tape from the camcorder during the trip.

  Two captured items have odd video bright red inserted for a second or two (is that a sign of a mistake?) in various places.

  Both show the following error message:

  F; \Video\Project1\Clip 02.Markus mgegError in MPEG stream detected around the frame 3502

  (there are about 20 these error messages in the events Panel)

  Suggestions?

  Thank you, in advance.

  -Mike-

  Premiere Pro CS3

  Camcorder Canon HV30 (mini DV tape)

  Link FireWire for capture

  second internal drive dedicated for video media

  Vista Home Premium 2 GB of RAM, 2 500 GB internal readers... lots of space left

  HP8187 DesktopE6750 Intel Core 2 Duo

  NVIDIA GeForce 8500GT

  HP LP3065c 30 inch LCD monitor (2560 x 1600)

  Red images are loss of images, the origin of the problems of Out-of-sync OOS.

  You can't address the loss of images, but you can avoid mistakes by HDVSplit OOS, a freeware capture program that is ahead of Adobe, allows to avoid these mistakes OOS, gives previews and scene detection.

• Can't figure out the settings for the correct video dimensions

  I'm using version CS4. I need help with settings for my projects. The dimensions of the frameworks I capture my Canon HV20 or my computer files I import are still too large in the working window. So I have to reduce the size of all the files of 46%, and then, they fit perfectly. But when I finish the project and export it, there's a big band of black around the video and the video fills only half of the screen.

  I know it is a settings problem - there are so many choices and I made the wrong ones. It's so frustrating

  Thank you for your help.

  Of course, you can edit a project.

  Do new sequence within the project with the correct settings.

  Copy images of old sequence in a new.

  When convinced erase old sΘquence.

  See below for the HV20 sequence settings.

  

• Cannot install Microsoft Streets & Trips with GPS 2011 error: your registry settings for this application were not copied correctly.

  Original title: Registry loading problem streets & trips

  I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution?  Russ B, Mt Laurel NJ.

  Hello

  1. where did you buy the disc?

  I suggest you to send your request in the below link.

  Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Hope this information is useful.

• rigistery settings for this app were not copied correctly microsoft Highway and travel

  At the opening of streets MS & travel 2011 I get this error "your registry settings for this application were not copied correctly.  Run put in place againfor this application from the location where you installed worginally. "I did that 3 timees I deleted the program and reinstalled in 2 and still Lems the same error when I try to open the program.

  ... Your registry settings for this application were not copied correctly.  Race againfor implemented this application from the location where you installed worginally...

  You probably need to run the installer as administrator with elevated permissions to correctly make the necessary registry changes.

  Uninstall the program via the applet of Add / Remove Programs of the Control Panel then locate the installer from the disc or download and right click and select run as administrator. Acknowledge the UAC confirmation and provide credentials if required, proceed through the installation normally.

  Microsoft Streets & Trips should operate normally after completing the installation.

• Streets and trips 2011 give error, your registry settings for this application were not copied correctly.

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  Installation of the new version of Microsoft Streets and Trips 2011 Win7 on my desktop HP says that it is installed.  However, when you try to open it, I get this response: "your registry settings for this application were not copied correctly.  To correct these settings, restart the installation of this application from the location that you originally installed it. "It won't let me open the program, even after I tried installing from the Microsoft Download Center and DVD disc several times.  He never asked me code product key during installation.  What can I do?

  Bill

  There is a forum dedicated Highway/Trips/Mappoint and streets that would be better to help with your problem.

  Click on the URL below a link to post your question.
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  I hope this helps.

  Marilyn

• Upgrade to Windows 7 Ultimate and highway 2010 receives the error: "your registry settings for this application no were not copied correctly."

  I updated from XP Pro to Win7 Ultimate.

  When I try to install Highway 2010 (that I had before) I get the following message

  "Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »

  I tried the suggestions without success. So what do I do to fix this?

  I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).

  So where they are or how can I get the.

  I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.

  Chris Townsend

  Now, I know the .rbf files are files of Roll-back.

  Hello Lrchr,

  Your question would be better addressed in the highway, streets and trips and MapPoint.
  Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.

  I hope this helps.

  Marilyn

• When I try to open the 2010 Highway, I get this error: "your registry settings for this application no were not copied correctly."

  I am running Windows 7 Home Premium and use Microsoft Autoroute 2010. This used to open and run without any problem but now I get the message "your registry settings for this application were not copied correctly.  To correct these settings, restart the installation of this application where you originally installed it.  I did several times since the original disc without success.  I also did my best to remove all files of previous Highway before recharging.  Any help or suggestions please?

  original title: Highway 2010

  "Do right click used to contain run them as administrator but does not give the option now."

  The above is a bit worrying, does that apply to just highway or all the .exe?

  If you press the SHIFT key while you right click, if you see?

  Anyway have you tried to test with another Windows user to see if your profile is corrupt?

• Correct location for the ADF - settings.xml?

  What is the correct location for the adf ADF - settings.xml in JDev 11 g applications file? Documentation conflicted says:
  
  (1) as by Frank & Lynn Oracle Fusion Developer Guide pg 92, it appears in the correct location for the ADF - settings.xml is < workspace >/.adf/META - INF.
  
  (2) according to the ADF Web Guide, it seems, it must be < workspace > / < project > / META-INF: http://download.oracle.com/docs/cd/E14571_01/web.1111/b31973/ap_config.htm#BABCBJAB
  
  Which is correct? With our thanks,
  
  DMI

  Chris,

  the recommendation to create the ADF - settings.xml in the project source META-INF directory solves the problem of two projects to be used in a single workspace. If the two projects use ADFc MDS got confused. Notes version in R1 mentioned as follows:

  If your J2EE ADF (EAR) application contains several modules web application (WAR files) and contains more than one ADF task flows, then you can get unexpected behavior due to the web application using another its flow XML file with the same name of task (the problem is more likely to occur with the adfc config.xml file because each web application has usually one). You can avoid this problem by defining a 'root web application' separate for each web application (WAR). Web application at most one cannot have any parameters of root web app. To set the "web app root" for an application, you must add an XML file called META-INF/adf - settings.xml to WAR under WEB-INF/classes with content as follows:

  +
  xmlns:WAP = "http://xmlns.oracle.com/adf/share/http/config" >
  ++
  ++
  ++
  ++

  The value of the rootName attribute can be any name that uniquely identifies the web application (war) within the overall application (ear).

  In JDeveloper, the new file can be added as follows:

  + 1. Expand the web application project in the browser Application.
  + 2. Right-click on "Sources of the Application", and then select the item 'new ' +.
  + 3. Select "XML Document" and click OK.
  + 4. Type "adf - settings.xml ' under the file name +.
  + 5. Click on the "Browse" button, select the source directory of the project, click the iconic button "Create a new subdirectory" at the top right, type "META-INF" directory name and click OK, then click Select.
  + 6. You should now have a directory and file name "adf - settings.xml ' name '/META-INF +.
  + 7. Click OK to create the new file.
  + 8. In the Source Editor, paste in the XML file above and put a value appropriate for the rootName attribute (this is known as the parameter 'root web application').
  + 9. Make sure that the deployment for the Web application profile includes the new file META-INF/adf - settings.xml under WEB - INF / classes.

  So, if your application has a single web project then this configuration as documented in the book is good to use. To avoid the problem described above (which is in response to bug 8395585) you set it in the project's source. Note that adding adf - setting.xml in the project was presented as a work-around. The bug is closed with a fixed rate per 11.1.1.2, which means that, since the PS2 there should be no need to store the ADF - settings.xml in the source of the project more.

  So long answer that leads to a simple answer: the book is good and the documentation lists always bypass it. However, I'll fill a bug against documentation and make report understand (do not have the time to check the issue being fixed)

  Frank

• I can't get on gmail, get the message about privacy settings, what are the correct settings?

  The message said that not allowing don't no cookies may be the problem but I tried on each setting I can think without results. Please tell me the correct privacy settings for gmail.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)