Corrections HTML window when changing the sites in the files pane
After force Dreamweaver to end task, reboot, removing with Add/Remove programs and reinstall, I always get a window HTML Corrections whenever I change a site using the drop-down list in the files pane.Line 5 Col 62: Closed, cavities not blocked a < meta > tag that remained.
I tried to delete all my sites and re - create and just switching between readers of network instead of sites created by means of managing the Sites, but it still seems.
Does anyone know which file or set of files I can check?
Quote:
Posted by: newsgroup userMaybe the fix is needed - my guess is that it is a child of a model page.
you have selected the xhtml syntax in prefs, and the meta tag IS not closed.
No, it wasn't the case when I open a HTML file, it was happening while I was using the Dreamweaver files Panel. as I said in my previous post, "whenever I change a site using the drop-down list:
The problem has since ceased; After the launch and the abandonment of Dreamweaver twice, he stopped and has not recurred.
Tags: Dreamweaver
Similar Questions
-
Windows 7 / Windows Explorer - change the file names to have all lowercase letters
I save files with uppercase letters in the name of the file. Since going to Windows 7, it seems that Windows Explorer continues to change the names of files to have all lowercase letters. Is there a setting that will allow me to record names of files with upper and lower case letters without exploring automatically change them?
Hi LeslieWeber,
-How long have you had this problem?
-What software changes you did on the computer before the show?
Follow these steps and see if the problem persists:
Step 1:
Create a new user account and check if the problem is recurring in the newly created account.
Step 2:
If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.
Access the link below and follow the steps to repair the corrupted user profile:
-
Original title: Windows cannot change the password.
I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.
With our thanks
Elizabeth
Hi Elizabeth,.
You can follow this link & check if the problem persists:
Impossible to change the password for the administrator account in user accounts in Control Panel
Hope the helps of information.
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program. I would then be able to download the books again. But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there. What I am doing wrong? You can give me some advice.
Original title: Pauline1949Hello
1. have you downloaded the right file to library?2. What is the file format of the file that you downloaded?
3. What are the recommendations of programs that provided by Windows?
4. have you installed the player from the computer program?
5 is this problem confined to a particular file that downloaded?
The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.Reference:
Reader store
http://eBookStore.Sony.com/Player for PC
http://eBookStore.Sony.com/download/If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.Reference:Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-defaultI hope this helps. -
Should I reset the FPGA FFT when changing the input signal?
Hello
I have an application based FlexRIO where I do FFT on several incoming signals. The signals will be ranked so that I get first for example 4096 samples of Ch1 and Ch2 4096 samples, etc. This means that I don't have to do it in parallel of the FFT and I would like to reuse the implementation of FFT and windowing to reduce the use of resources.
I intend using the VI Express followed by the Express VI of FFT window scaling
http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_scaled_window/
http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_fft/
and I'll use them inside a SCTL.
This figure comes from the section using the FFT and help illustrate the issue:
There is a discount to zero terminal for the fenestration and the FFT VI.
Are there internal registers in the windowing and FFT which force the image 1, image 2,... from the same signal or is it possible for the first entry in a framework of Ch1, the next frame belonging to Ch2, Ch3 gaze and so on and always get reliable results?
Another way to ask the same question: if I have to reset the window and FFT when changing the input signal?
Thank you
Anders
Hi Cyphish,
When using the FFT of the LabVIEW FPGA vi express and windows nationwide express vi calculations are make it point by point so there will be no problem when going through different types of measures. Therefore, you should have no problem with your application.
Best regards
Menelaos.K
-
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
I tried to change the file type description, as well as in default and the icon for the rar and iso programs file types inmenu\ tools\folder options\file typest\advanced, but to change the settings on a file type automatically changes settings on the other.
How can I do this via regedit? What can cause a bug?
* original title - xp: types of files RAR and ISO locked together, the same treatment! *
Hello
1. How are you sure that you change the individual file extension and not the entire folder?
2. how exactly you try this?To change a name of file, all you have to do is right click on the file, and then click Rename, instead of the path you describe in the thread.
See also the section below to associate the default program for different file types.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859 -
Original title: the iTunes does not work
every time I want to launch the iTunes, my computer shows "iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Hi Winston,
Were there any changes made on the computer before the show?
I suggest you refer to the article to fix the problems with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
I suggest also refer to the link to support Apple iTunes:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
-
Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.
On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly. Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results. Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software. Everything seems to go well with the installation until suddenly I get this message.
Hello
1. what programs are they?
2. What are they compatible with windows vista?Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer -
Computer: Vista Home Edition Premium, SP2
My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »
I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.
This is the error in the event log
Log name: Application
Source: Microsoft-Windows-search
Date: 2011-08-09 16:49:45
Event ID: 3084
Task category: Gatherer
Level: error
Keywords: Classic
User: n/a
Computer: rb - CCP
Description:
Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available. .The event XML:
3084
0
2
3
0
0 x 80000000000000
380048
Application
RB - CCP
Search.MediaCenterHandler.1
A server error occurred. Verify that the server is available.
Hello
I suggest you follow the methods and check if it helps.
Follow the steps below and check if it helps.
(a) exit any running instance of Windows Media Center.
(b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:
%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
To remove the file, follow these steps:
i. Click Start and then click Run.
II. in the Open box, type run and then click OK
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
IV. in the details, click pane right mediacenterdatastore.db and then click on remove.
c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
(c) start Windows Media Center.
I hope this helps.
-
Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!
Hello
It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us
Don't forget to restart your computer after you run it.
If this does not work, try to uninstall and reinstall the drivers for your printer.
If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)
I hope this helps!
Mithrandir
-
Skype has stopped working. a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
We have Windows 7 and automatic updates.
I worked until the afternoon with Skype and after an hour when I arrived on the Office to continue to work the Skype has stopped working.
Please help me urgently!
We did all the things written on goole /Microsoft Skype support.
Does not Skype is the only program ot getting intalledIt worked! I had tried everything, but it worked for me, thank God, we communicate through Skype of Nevada USA, Ireland and cannot lose touch. It's an absolute answer to our prayers. Thank you for posting! Skype heartbeat is a very informative page that I had not discovered before now, either. Excellent!
-
When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?
I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do? What problem is it?Hello
1. what file format you are trying to burn?
2. have you made changes on the computer recently?
3. What is the security software installed on the computer?
If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.
Here are a few things to try:
1. make sure that the disc is clean.
2. try a different brand of blank discs.
3. stop all other programs that are running.
4. make sure that the hard drive does not use disk compression.
I suggest that you follow these steps and check if they help to solve the problem.
Method 1:
Try to use the Troubleshoot utility to see if that solves the problem.
a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.
(b) in the search box, type "convenience store" and then click Troubleshooting.
c. click on show all and then click the Windows Media Player settings.
Method 2:
Select a recording speed (write) more slow for the CD burner.
Change settings for burning a CD or DVD in Windows Media Player
Method 3:
If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.
Note: Reinstall the software after the trial.
Method 4:
Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareNote: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
I hope this helps.
-
Hello
Whenever I try to play something or burn something using Media Player, I get a message. "A problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.
Help
Jason
No worries, go to the start screen and find the Green store icon. When you open it will let you know if the update is available.
Maybe you are looking for
-
Videos and photos full resolution will not download
My iPhone has the option 'download photos in full resolution' is enabled. I decided to do the same thing for my iPhone but when I went to the photos app on my ipad, he said not "enough space". I had 22 GB of free space on my ipad. My library is only
-
Re: Transfer of photos on eBay from my laptop Satellitle L450 - 16 q with Win7
My old laptop broke so I bought a new and now I have the headache that I can't download the pictures to sell my stuff on ebayI found on the internet other ppl with the same prob, PC toshiba laptop windows 7 and not ebay download but there is no solut
-
Portege M400 sees no more than 3 ~.
I know it is a common problem, but apparently not solveable on my Toshiba M400. I have upgraded to 4 GB of RAM (2x2gb) and I am running a 64 bit OS, but the OS cannot see that the 4 GB installed ~3.3GB. The BIOS shows 4G. I understand that some machi
-
router fell, only mouse click, now Windows will not boot up
I have Vista, and I used my computer with wireless mouse, no problem. Then my cat hit the small router computer and the speaker behind the counter. No problem for a while. Then my mouse has stopped working. Changing the batteries, no difference.
-
1 pavilion g6 - 1311AX 2 windows 7 3. no error message 4. no exchange of computer 5 laptop when he puts the word of windows appears but freezes. I wait for a while and then power off and on again. The screen displays start windows normally, or select