Corrective measure on inaccessible Agent?

Similar Questions

• desktop computers to linger in the folder 'inaccessible Agent' for a long time, apipa address might be a clue

  Hi all

  We run see 6.1.1 with linked clone Windows 7 desktops. Lately, some workstations hang in the State 'inaccessible Agent' for what seems like 15 or 20 minutes until they are refreshed. We have pools set on closing session and refreshment after 1 minute if disconnected. We noticed that desktop in this weird State have an apipa for the virtual NETWORK adapter address (starts with 169.254.x.x). If go us to the office as local administrator and do an ipconfig / renew, it will get a valid IP address on our network and as soon as it gets a valid IP address, he leaves the "Agent unreachable" queue and passes by the update process. It seems that Conversely, we can get these desktop computers to process more quickly is to remove them.

  This is not an isolated machine virtual on a particular ESXi host (I saw him arrive on all hosts) and when I look for ESXi hosts network settings, I see that the virtual machines in question are related to the virtual switch. I ensured that the virtual switch has enough ports (120) and I checked the DHCP servers, and there are a lot of IPs available in the subnet where live virtual offices.

  Also, it does not seem to be isolated to a pool, we see in a pool that uses the management of the Persona and a swimming pool which is not.

  Any thoughts on how to solve the problems?

  Thank you!

  Don't know it could help you, but we have IP private address automatically on our vdi error (it worked fine, but it broke after an update) we had to close 1 our DHCP servers (we had 2) since then, then all is back to normal. We will need to track DHCP to know exactly what is the cause of the problem none of our dhcp gave a clue at the time.

• Management Console Oracle 10 g - State of work - suspended on inaccessible Agent

  Recently, we updated our 10.2.0.1 to 10.2.0.4.0 RDM 25 PATCH .
  
  Since we moved, we had problems with our RMAN backups. Now when a scheduled backup starts it never ends. Now, every time schedule us a task, from backup to any simple system, the State command returns immediately "suspended on inaccessible Agent."
  
  We can start and stop the dbconsole successfully, and I can use the OEM to monitor the database and make changes to that. However, I can't run any regular job database through the OEM. However, I can run the rman via the command line work.
  
  The database server and the OEM console is the backup server. I'm not under CARS. Everything that affects the database is on this server.
  
  Here are the results for emctl agent status:

  E:\oracle\product\10.2.0\db_1\BIN>emctl status agent
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent Version     : 10.1.0.6.0
  OMS Version       : 10.1.0.6.0
  Protocol Version  : 10.1.0.2.0
  Agent Home        : E:\oracle\product\10.2.0\db_1\content.mydomain.com_ORCL
  Agent binaries    : E:\oracle\product\10.2.0\db_1
  Agent Process ID  : 34372
  Agent URL         : http://content.mydomain.com:3938/emd/main
  Started at        : 2010-01-11 14:58:24
  Started by user   : SYSTEM
  Last Reload       : 2010-01-11 14:58:24
  Last successful upload                       : (none)
  Last attempted upload                        : (none)
  Total Megabytes of XML files uploaded so far :     0.00
  Number of XML files pending upload           :     5016
  Size of XML files pending upload(MB)         :    42.77
  Available disk space on upload filesystem    :    37.94%
  ---------------------------------------------------------------
  Agent is Running and Ready

  Here are the results for emctl agent status:

  E:\oracle\product\10.2.0\db_1\BIN>emctl upload
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
  EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..

  I think that the mistake of downloading EMD is perhaps the problem, but I'm not sure how to solve this problem.
  
  What should I do to fix this?
  
  If more info would be useful, please let me know and I will post immediately.
  
  Thank you.

  It seems that the agent has not run successfully, since you have done the upgrade. Equals the Oracle_Home? or did you change Oracle Homes?

  Try this:
  -emctl station agent
  -Remove all the files in $AGENT_HOME/sysman/emd/upload and $AGENT_HOME/sysman/emd/State
  -agent of clearstate emctl (this should remove all State files but sometimes it is not enough, but I lived it is preferable to use this command after you remove files)
  -agent sure emctl
  -emctl start agent

• Problems of inaccessible agents

  I'm in several systems, through different pools of view 5.2 horizon that show the ' status: Agent inaccessible Pairing State: paired and secure.» I tried several methods to return to a State of 'Available' with no luck. I deleted the tools and agent in the common process (http://myvirtualcloud.net/?p=952) and re-installed both. Desktop computers are able to solve a nslookup of the servers of connection as well as access to a telnet to port 4001 session.

  Agent version: 5.2.0.987719

  The Tools version: 9.0.12.35149

  Hosts: 5.1.0 2000251

  Global setting > Security > Message security mode: = disabled

  Login server version: 5.2.0 - 987719

  Windows 7 workstations

  Thanks for the reply. It turns out be associated with the following

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1024421

  The KB has you remove the key \Guest Customization\CustomizationInProgress HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\VMware, Inc., but in our case change, the value of '1' to '0' to correct the problem.

  All of this seems to come from the following

  VMware KB: Tracks personalization repeatedly urged on the virtual machines deployed to host ESXi 5.1 build 1743533

• Corrective measures wireless

  I'm looking to improve a wireless implementation that does not work as required. The first step would be to conduct a study of the site. Can I do it with the existing operational network, or take the hit and turn off the APs for a day or two?

  Mark

  Necessary first step to shut down your existing wireless network to carry out an investigation. in fact, a survey of your existing running network is necessary to determine if you have a coverage problem or the source of your problem is something else like an oven to microwave or a misconfigured AP or out-of-date drivers on the users compters. Some wireless integrated into laptops have had serious problems with the original drivers.

  Cisco abg card comes with a survey tool that is very useful.

  http://www.Cisco.com/en/us/docs/wireless/wlan_adapter/CB21AG/user/2.0/Configuration/Guide/winapFkh.html

  This link leads to annex F, which explains how to perform a survey of site with the tool.

  If you have a spare AP just configure it with an SSID different and put in place in various locations to check the coverage, and it should not interfere with your existing wireless network.

  Bill

• The upgrade of VMware View Agent from 5.2 to 5.3 causes agent become inaccessible in Horizon administrator.

  Short throughout, I was unable to update several agents to 5.3, because the 5.2 msi could not be found.

  I followed the instructions on this page (KB VMware: UpgradingVMware View Agent and View Composer fails with the error: the component that you are trying to use is o...) and installed the agent 5.3

  It worked on the test systems 3. When I went to live 2 principles broke. I can RDP but you cannot use the Client to connect and get a response that says that the resource is not available.

  I looked into the Horizon view Admin and they are listed as inaccessible agent, matching State pairings.

  I did the following.

  Uninstalled agent 5.3.

  Uninstalled the tools.

  Reinstalled them both.

  The removed from the inventory of the pool and added them.

  This is Win7 systems.

  Any help would be much appreciated.

  Fred

  I could solve this problem by removing the pool, then adding back and then restarting the agent service. It sometimes took two reboots, but that's fine.

• Problem installing Standalone Agent ODI

  I guys I installed ODI ODI Agent 11.1.1.7 to a Solaris Server 5.11.

  Using the topology of ODI tested successfully, the agent but to, click planning I got an inaccessible agent of the issue.

  The log shows the issue:

  HTML >

  < head > < title > Zimbra - agente.txt < / title > < / head >

  < body >

  < pre >

  2014 03-09-14:43:33.809 WARNING agent.scheduler.pingAgent.failed

  2014-09-03 14:43:33.810 warning Agent is not accessible. Go to try again after inteval: 30000

  2014 03-09-14:44:07.187 ERROR ODI - 1131 Agente_Mantas Agent encountered an error: the {0} parameter is mandatory

  2014 03-09-14:44:07.193 oracle.odi.runtime.agent.ExecutionException ERROR: parameter {0} is required

  at oracle.odi.runtime.agent.processor.impl.GetPlanningRequestProcessor.doExecuteSchedulerRequest(GetPlanningRequestProcessor.java:59)

  at oracle.odi.runtime.agent.processor.SchedulerRequestProcessor.process(SchedulerRequestProcessor.java:74)

  at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:68)

  at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:562)

  at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:516)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)

  at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)

  at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)

  at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)

  at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)

  at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:417)

  at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)

  at org.mortbay.jetty.Server.handle(Server.java:326)

  at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)

  to org.mortbay.jetty.HttpConnection$ RequestHandler.content (HttpConnection.java:879)

  at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)

  at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218)

  at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)

  to org.mortbay.jetty.bio.SocketConnector$ Connection.run (SocketConnector.java:228)

  to org.mortbay.thread.QueuedThreadPool$ PoolThread.run (QueuedThreadPool.java:520)

  Any help will be appreciated,

  Hello

  It can cause the configuration correct not only in the file odiparams.sh

  Cause: Bad specification for the URL to connect to the repository.

  Solution:

  Set the hostname of the URL of repository of work (in this case WORKREP1) to the correct value.

  This value is found in the repository of work > JDBC tab in the JDBC URL field.

  A better you give ipaddress instead of give the host name in the topology > agent configuration

  Hope this can help you

  Kind regards

  Phanikanth

• One application other than the Hyperic Agent can enter data in the DB?

  Hello Experts!
  
  I'm a newbie regarding Hyperic, and my customer is asking me questions such as:
  
  "Can we control a Perl process to measure with Hyperic Agent?" - I think the answer is 'no '. Is this correct?
  
  "Otherwise, if scratch us FlatFile newspapers (e.g., using a Perl process) to gather metric data about a process, can we simply insert the resulting data in the HQ table in the DB (without Agent Hyperic and Plugins) and so 'wrong' HQ allowing us to take advantage of its visualization abilities? -I think the answer is "no--at least not safely. A likely reason among others for the failure of such an approach could be unique complexity ID/key. "Is this response on the target?
  
  Although I would be happy to any detail in your answers, there is no need to go into deep detail - I'm just trying to get an overall assessment.
  
  Thank you in advance and best regards.

  Hello

  You can monitor the health of a process either a script or a compiled program. If you are wanting more detailed metrics using a custom plugin brings together the like this.

  Agents collect metrics and events and pass them on to the server, which then inserts into the database. Without going through this channel is dangerous because you speculated and will lead to very bad results. Agents can collect the log as an event entries. There are a few default plugins that can do this and you can also write your own plugin (much easier than it sounds) to collected the lines in the journal.

  So the simple answers are 'Yes you can monitor a process and logs' and 'no. do not bypass the server.

• Measurement time 4132 SMU is too high

  Hello

  I use PXI - 4132 DC EMS to perform some DC measurements at high speed. I just took a 1 K Ohms resistance, forced 1mA and measure 1V. I have this done configuration and code completed. I get the correct measurements. But my problem is with the measurement time. The total duration is about 45ms to complete installation and measurement, with the exception of the 'initialize and close '.

  I checked the time at every step and I noticed that the maximum duration is taken during the "voltage reading. Out of the total 45ms, it takes about 34ms just for a measure. It's just a VI "Ukraine power measure" takes about 34ms, which is ridiculous compared to the Kiethleys. I tried to vary the time of "openness" and turn off the 'Auto Zero'. But the measurement time is still high. Can someone help me and let me know what is the best time of the measurement obtained with 413 x series SME?

  Thank you!

  Hey Phx_tech,

  The amount you reduce your delay source depends very much your HAD and how regular you have to your level of tension until you start taking your measurements.  If your Instrument is reactive, you can see discount gas and unintentional ringing during the transition from your output level and therefore would allow enough break-in before taking your measurement. The best thing to do is to experiment with different delays of source and see how much delay need you to get a consistent and reproducible measure. If you have a scope that is available, it will also show you the step response of the SMU with your Instrument.  If your first reading is higher than your other readings, that this could very well be a problem with not enough time settling.  What kind of DUT Testez_ you?

  From page 4 of the specification, you can see that 1 PLC, we can expect about 1 ppm RMS noise of the range to 1 PLC. This means in the range 10 au our measurement noise would be 10 pA RMS or 60 pA pk - pk.  However, your DUT + cables will pick up the extra noise and you should consider using wires of twisted shield pair to reduce noise picked up in your system.  The shield can be terminated at the mass of the chassis on the side EMS of the cable to help reduce noise appearing in your measurement.

  

  Let us know what you find after experimenting with you HAD.

  Thank you!

  Brandon G

• PhysicalChannel.DIChangeDetectionSupported not correct

  Hello

  I have a PCIe-6321 with 24 digital lines. Only the first 8 specifications (port0/$line0... (7) can be used for change detection. Also when I try to use...

  myTask.Timing.ConfigureChangeDetection (up, down,

  SampleQuantityMode.ContinuousSamples);

  ... of channels do not support detection of changes (port1 and port2) I get an error on the audit.

  In my program, the user can select which device to use. I fed to the user a list of all the DILines who have the the PhysicalChannel.DIChangeDetectionSupported set to true, like this...

  PhysicalChannel physicalChannel = DaqSystem.Local.LoadPhysicalChannel("\dev1\port1\line5");

  If (physicalChannel.DIChangeDetectionSupported)

  {

  inputTerminals.Add(("\dev1\port1\line5");

  }

  However, all digital 24 for return true on PhysicalChannel.DIChangeDetectionSupported that should not be the case.

  Is this a bug or am I missing something?

  Hi Holland,

  I think it's a bug, but it is also a kind of gray area. Here is the description of this property by using LabVIEW (I guess using .NET said the same thing): "Indicates if the calendar type of change detection is supported for the physical digital input channel".

  You can use the calendar type of detection of change with port1 and port2? In normal use, the answer is no. However, there is one case where you can: detect changes without buffer. If you set the size of the buffer entry to 0, then it is possible to have lines of port1 and port2 in the task without mistakes, as long as they are not included in the side up/down lines property. (In other words, port1 and port2 may not lead the task of detection of change, but memory buffer is off, they can come along for the ride). Di ChangeDetectSupported returning true may be technically correct, but it is not particularly useful, because you need to configure additional properties to make it work.

  M series also supports detection of changes without buffer, and DI, it returns false. ChangeDetectSupported on port1 and port2. So no matter what the correct behavior is, this property does not always behave on the series of M vs X-series. I just filed a request for corrective measures, CAR #298171.

  As a solution, if your code does not work on the materials NOR 65xx, perhaps you could use DI. ChangeDetectSupported & DI. SampClkSupported? Di SampClkSupported returns false to port1 and port2 on M and X series.

  Brad

• Which is the correct Point on the waveform of the Signal?

  Hello

  Please see attached image.

  I have labview software which is to measure the load of a load cell output. According to me, that the reading is accurate, except with the software Labview, we get up to 50 lbs less when we read it with the oscilloscope technician.

  What I see is that the technician measure the amplitude of the signal at the top and when there is little noise reading of the oscilloscope is even higher because the placement of the cursor is higher.

  I see that LabView is more or less because when we place the cursor oscilloscope in the middle of the measurement at the center of the signal signal not top it it reads then the same my labview program. I also have a low bypass filter in labview software.

  Which are the correct measure points waiting for oscilloscope to measure? in the picture as an attachment the white slider is positioned correctly, or is the correct red cursor?

  It's just an example of image zoom to see better.

  Thanks to you all.

  JCollado

  If I understand you correctly the width of the track to noculars represents 50 lbs of difference as? If you think about how works a noculars, then the center of the line displayed is probably the most accurate. The line width is determined by a few things, noise superimposed on the signal being a. So, with a noise filtering in your LabVIEW its 'width of the line"program will be closer / diluent, as it will have removed some of the noise component. Place the cursor in the middle of the path displayed in the noculars is an approximation of this, sort of looking for the point where the noise is "average" out 1/2 top / in-1/2 under the cursor, which is about the signal of 'data '. It is difficult to make measurements of accuracy of a noisy signal with a noculars for this reason, where do you put the trace? If you were to remove the filter program LP you would probably get the equivalent of the "wide trace flag" which would be a series of values that plotted close the underlying signal, but with high and low variations equivalent to the width of the track.

  So after all this verbiage, I would read the trace Center, perform an average of noise 'eyeball '.

• IP3600-series 8001 ceased to print - error code 10 6 displayed. Corrective action?

  What is corrective measures for 6c10 error Code?

  Hi wriley3,

  To try to resolve the problem, with a flashlight or other light brilliant, please check the area of the paper feed printer and check that there is no jam or obstruction in the printer that can cause the error.   Once this has been done, please look inside the printer where the ink and make sure that there are no obstacles in there that may be responsible for the print head does not move freely.  Then, remove and reinstall all the ink cartridges in the printer.

  If you still encounter the same error after following the instructions above, please turn the printer off, unplug the power cord at the back and leave it for at least 10 minutes, then plug back in and turn it on again.  If the error persists, the device will require maintenance to solve the problem.  Please call or write to us at one of the methods on the contact us page to get your service options.

• PS_Scheduler agent does not collect not data in Foglight 5.6.4

  Hi all

  We are schedular areas of NT surveillance for Peoplesoft applications. For this, we Monitor PS_Sched agent and given necessary properties in it and created PS_Schedular and PS_SchedServer agents to monitor instructions SQL and use resources.

  We are facing some problems in PS_Schedular agent because it collects no data and throwing an error like "there is no way the home of Peoplesoft.

  

  Please suggest some troubleshooting steps to resolve this problem...

  Thank you best regards &,.

  Guenoun

  This error has to do with the database connection setting is the PS_Scheduler agent properties.  Check the settings and make sure that the settings are correct.  Don't know what DB platform this PS environment use, but make sure that the settings are correct by accessing the Agent status-> and change the properties of the agent for DB connection settings.

  The f

• DBConsole error - "Agent unreachable".

  Hello

  IM facing problems with my Oracle 11 g (Enterprise Edition). The DBConsole fails to start in the services. It produces error "Windows has no start OracleDBConsoleorcl on the local computer.

  When you are logged in DBConsole browser page and the error is indicated here 'status - inaccessible Agent '.

  My DB still works fine without any problems. IM access DB using SQLPLUS commands. Issue seems to be with only DBConsole.

  Hope someone could help me on this issues.

  Thanks and greetings

  After changing the time zone, you must reset the time zone and update the repository as follows:

  The stop agent

  resetTZ to agent_home/bin/emctl agent $

  Update agent target zone to the em repository:

  1. Connect to the repository with sysman em database
  2. SQL > exec mgmt_target.set_agent_tzrgn ('',' U.S./Central ');
  3. SQL > commit;

  Start the agent.

  concerning

  Fahd Mirza

• Not able running Maxl, if ODI Agent is running under &amp; managed by OPMN

  Error thrown when in the execution of Oracle Essbase Interface Inteface using IKM SQL for Hyperion Essbase (DATA) and by calling a MAXL clear script in PRE_LOAD_MAXL_SCRIPT.

  Execution of the Interface is done correctly if the same agent ODI runs directly from the command prompt (using agent.bat). But when we start the agent the instance of OPMN, the following error:

  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: cannot run the program "essmsh": CreateProcess = 2 error, the system cannot find the file specified

  The agent of ODI running fine and complete any execution of the interface without MAXL. But if we use PRE_LOAD_MAXL_SCRIPT, it generates an error.

  We have already created two environment variables such as ESSBASEPATH and ARBORPATH, also set to day the Path variable. We are able to start maxl using the command "essmsh" directly from the command prompt.

  I would like to know how can we call MAXL scripts through successful ODI agents OPMN.

  All the suggestions/help will be appreciated.

  Thank you!!

  Hi Ashish,

  Some time ago I saw it, so I forgot a few other env variables that must report in opmn.xml. It also needed a little more env vars the overall environment for OPMN is very limited. You can try the steps Note 1556801.1 as well. If all goes well, that should do the trick.

  Concerning

  Craig