Problem installing Standalone Agent ODI

Similar Questions

• Question about installing standalone Agent in patched environment

  Hi all

  I have a question about the installation of an autonomous Agent of ODI, some information on the situation: I have Studio ODI 11.1.1.7.0 installed and configured. Everything worked fine until we have improved our environment from planning to 11.1.2.3.500 patch.  We had to apply the patch 18687916 for ODI solve some problems, but everything worked well again after that.  Now I need to install an autonomous agent to run scenarios in a batch, the agent will be on the same server as the ODI studio.  My question is can I run the installer and only select the autonomous agent then reapply the patch 18687916 or do I need to get out the patch 18687916 first, or something totally different? 

  Hello

  I think you should restore the 18687916 patch and then install the standalone agent, then patch 18687916 it.

  But wait answer of the guru.

  In my case, I did the thing above, and it works very well if it was my test environment.

  Thank you

  Pratik

• ODI 12 c Standalone agent problem

  Hi, Experts!

  I upgraded 11.1.1.7 to 12.1.3 ODI

  then installed ODI Standalone agent (using oracle manuals https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=194782698727947 & id = 1960713.1 & _afrWindowMode = 0 & _adf.ctrl - state = dxzghng31_372)

  !) Beginning nodemanager

  (2) boot agent (startComponent OracleDIAgent1)

  and error < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::ERR:Error: could not find or load the class main oracle.odi.Agent >

  This class is in C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\odi-independent - agent.jar and path exists

  Maybe somedody knows how to solve this problem

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_INSTANCE_JAVA_OPTIONS value = >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > REM add any jars/ZIPs/paths additional that must be added at the end of the classpath here. >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_POST_CLASSPATH value = >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_CLASSPATH=C:\Oracle\Middleware\Oracle_Home\odi\sdk\lib\jython.jar value; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\modules\com. Oracle.WebLogic.Security.encryption_2.0.0.0.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \oracle_common\modules\datadirect\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\*; Odi-independent - agent.jarof C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - jse_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - common_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\... \sdk\lib\oracle. ODI - SDK - jse_12.1.3.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\server\lib\wlthint3client.jar; "C:\PROGRA~1\Java\jdk1.7.0_60\"\lib\tools.jar; >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_LOG_OPTIONS value = ""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class =" " oracle.core.ojdl.logging.LoggingConfiguration">

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  "< 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_JAVA_START=""C:\Progra~1\Java\jdk1.7.0_60\"\bin\java.exe the value "- Xms32m-Xmx256m - XX: MaxPermSize = 128 m-Dcoherence.home=C:\Oracle\MIDDLE~1\ORACLE~2\coherence-Dbea.home=C:\Oracle\MIDDLE~1\ORACLE~2-Dweblogic.RootDirectory=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1 - Xverify : aucun-Djava.endorsed.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\endorsed; C:\Oracle\MIDDLE~1\ORACLE~2\oracle_common\modules\endorsed-Doracle.ODI.home=C:\Oracle\Middleware\Oracle_Home\odi-Ddomain.home=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain '-Djava.security.policy=C:\Oracle\Middleware\Oracle_Home\odi\agent\...-... " \oracle_common\modules\oracle.jps_12.1.3\domain_config\jse\java. "Policy" «-Doracle.security.jps.config=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config-jse.xml""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration" >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ""C:\Progra~1\Java\jdk1.7.0_60\"\bin\java.exe" - Xms32m-Xmx256m - XX: MaxPermSize = 128 m-Dcoherence.home=C:\Oracle\MIDDLE~1\ORACLE~2\coherence-Dbea.home=C:\Oracle\MIDDLE~1\ORACLE~2-Dweblogic.RootDirectory=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1 - Xverify " : aucun-Djava.endorsed.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\endorsed; C:\Oracle\MIDDLE~1\ORACLE~2\oracle_common\modules\endorsed-Doracle.ODI.home=C:\Oracle\Middleware\Oracle_Home\odi-Ddomain.home=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain '-Djava.security.policy=C:\Oracle\Middleware\Oracle_Home\odi\agent\...-... " \oracle_common\modules\oracle.jps_12.1.3\domain_config\jse\java. "Policy" «-Doracle.security.jps.config=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config-jse.xml""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration ' - DLOG_FILE = odiagent.log - classpath"C:\ ". Oracle\Middleware\Oracle_Home\odi\sdk\lib\jython.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\modules\com. Oracle.WebLogic.Security.encryption_2.0.0.0.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \oracle_common\modules\datadirect\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\odi-standalone-agent.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - jse_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - common_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\... \sdk\lib\oracle. ODI - SDK - jse_12.1.3.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\server\lib\wlthint3client.jar; "C:\PROGRA~1\Java\jdk1.7.0_60\"\lib\tools.jar; "oracle.odi.Agent - INSTANCE = OracleDIAgent1 >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::ERR:Error: could not find or load the class main oracle.odi.Agent >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ENDLOCAL >

  < 30.03.2015 15:31:13 MSK > < SEVERE > < error: null >

  I found the reason of this problem. Problem was quoted in commODIEnv.cm and agent.cmd... many citations (quotes in quotes, that's why java becomes crazy)

• ODI 11 g Standalone Agent error

  Hi all
  
  ODI11g installed on a windows machine (have not installed the standalone agent). ODI directory is c:\ODI11ghome
  
  Came later and create an autonomous agent TEST_AGENT (used different directory c:\odistandaloneagent).
  
  I see the Agent in the physical and logical topology but impossible to start.
  When I tried to start it by using the batch file agent_TEST_AGENT.bat under
  
  c:\odistandaloneagent\oracledi\agent\bin
  
  It returns the following error
  
  OracleDI: Starting Agent...
  Could not bind _logforceprintv
  Osal.dll did not.
  
  He osal.dll file is located under the c:\odistandaloneagent\jrockit-jdk1.6.0_17\jre\bin directory.
  
  Is something wrong with odiparamas.bat file?
  
  Jack.

  startscen.bat    [] [-AGENT_URL=] ["-NAME="] ["-SESSION_NAME="] ["-KEYWORDS="] ["="]
  

  AGENT_URL is used to access the remote agent and so please use the correct url of the location of the agent

  I think that this agent you are using is an agent of ODI server so it must be something like this

   startscen.bat SALES 001 ODIDEV -NAME=DEV_AGENT 
  

  Also, make sure that you have the updated odiparams.bat file.

  Are looking for in this link for more information http://download.oracle.com/docs/cd/E14571_01/integrate.1111/e12643/running_executions.htm#ODIDG620

• problem installing agent on linux

  Hello.
  I'm trying to install an agent on a linux machine and connect to a server hq on another machine. I changed in the 'agent.properties' file the following lines:
  
  agent.setup.camIP = 192.154.1.107
  agent.setup.camPort = 7080
  agent.setup.camSSLPort = 7443
  agent.setup.camSecure = no
  agent.setup.camLogin = hqadmin
  agent.setup.camPword = hqadmin
  agent.setup.agentIP = default
  agent.setup.agentPort = default
  agent.setup.resetupTokens = no
  
  but when I try to start the agent, I get this error:
  
  [Installation agent]
  What is the IP address of the server HQ: 192.168.1.107
  Communications Officer at Headquarters always be sure [default = no]: no
  What is the [default = 7080] HQ server port: 7080
  -Unsecured connection test... Failure
  Can't set up automatically: unable to connect to central administration
  
  Does anyone have an idea on how I could fix this?
  
  Viktoriya

  ESAT,

  You have a firewall or blocking connections to port 7080 SELinux?

  -jeremy

• File not found error when you use agent ODI.

  Hello

  I am trying to load data using the csv file and get the following error.

  ODI-1227: SrcSet0 (load) task fails on the source FILES LOCAL connections.

  Caused by: java.sql.SQLException: ODI-40438: file not found:

  I am going through the oracle blog and discover this ODI agent and the source file must be in the same server. But I can't place t of the file to the server of the odi where the agent is running. Can anyone know how to solve this problem.

  ODI configuration:

  ODI 11.1.1.7

  ODI Linux server

  ODI Client Windows 7.

  Thank you

  P

  Hi Paul.P,

  If you select an agent for execution of your, this agent should have access to all sources of data (DB, files,...) used in your integration project.

  You can map a network drive on the server where the agent is running and move files. Or you can get it from the original location via FTP or sFTP, for example. But your server must be able to manage this file at some point, if you want to use.

  If there is no way you can have the files on this server, you must take the opposite approach and install a new agent, where the files are located.

  More information: http://www.ateam-oracle.com/understanding-where-to-install-the-odi-standalone-agent/

  Kind regards

  JeromeFr

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Hard drive crash as possible; If I buy Windows 7, I have a problem installing it?

  Startup problem

  I can't start with Vista.  Download the screen saying enter ctrl-alt-delete.  Unable to restore the system, use backup factory or reinstall the OS from the system CD.  But when I checked before the accident, the hard drive worked OK.  Obviously, corrupted.  My question: if I buy Windows 7, I have a problem installing it?

  It's your BIOS configured to boot from the recovery disc?
  How load BIOS and change Boot ... - Notebooks.com
  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• How to install Microsoft Agent in Windows 8 x 64?

  I installed Windows 8 Enterprise x 64.
  However, I can not install Microsoft Agent like what I did in Windows 7 Enterprise x 64.
  Show me a solution for this problem, please!
  Thanks in advance!

  Try this reconditioned Microsoft Agent 2.0 for Windows 8 and Windows 8.1
  32-bit and 64-bit version is available in this package.

  http://www.mediafire.com/download/v9a9bfv9o7dmyav/MSAgent_6.1.zip

  This reconditioned file will work on your computer
  Tested on my machine Windows 8.1 x 64
  

• After re-installing the agent of the view, the view Desktop cannot log on to the domain

  Hello

  I have a problem with the administration of desktop view. Our clients use a view 4.0 environment. Every time when I re - installs the agent discovered in a machine of Office XP (Office pool deployed with the active composer), after rebooting the machine one connection at the level of the customer area microsoft is not possible.

  Whenever I have to remove the computer from the ad domain, after that I had to take back this machine in the field. But I can not install the successful agent in the view, when the machine is member of the domain. So I remove the computer from the domain ad, re - install the agent and take back the machine in the field.

  So what is wrong?

  Anyone have the same or a similar problem?

  Kind regards

  André

  Can you please confirm if they are related clones?  If so this behavior is expected, approach correct and taken in charge for the update of the Agent is for example to do it on the master image and without the link clone himself and then perform a recomposition.

  I believe that the cause of this boils down to 2 files:

  SIM.datsimvol.dat

  Frankly I am still not exactly sure what these files specifically do.
  

• Install the agent in ODI11g

  I try to install ODI11g.
  At the time of the installation of ODI11g, he gives us lots of options such as
  ODI Studio,
  ODI SDK,
  Autonomous agent,
  Java EE Agent,
  ODI COnsole,
  Public Web service
  
  I can't make a decision, what to install.
  
  We have our master repositories and work in a database of deparaments.
  We are trying to install ODI on a Linux application server.
  We will develop by borrowed ODI interfaces to the application server (we have several users)
  Can anyone suggest me what than what I have to install?
  
  Thanks in advance
  
  Published by: user10390682 on 16 Sep, 2010 07:07

  You must certainly autonomous agent so that ODI client allows users to application server resources to lead the charge rather than their local customers and machine for communication of other databases and servers. Autonomous agent will also be to plan loads and various other reasons.

• Where to install the agents?

  Hello
  
  I now architecture:
  -Server 1 - ODI installed with the Server option
  -Client 1 - installed ODI with the customer option
  -Client 2 - installed ODI with the customer option
  
  -Server 2 - DB Oracle installed - ODI repositories created
  -3 Server - Oracle DB - source system
  -Server 4 - MS SQL Server - source system
  -5 - Oracle DB server - target system
  
  I do not know where to install the agents for this architecture:
  -on server 1?
  or
  -on 3 or 4 (source systems) servers
  or
  -the Server 5 (target system)
  
  What solution will be the best in this case?
  
  Thanks in advance!

  It is best to install the agent as close to the target as possible. So, in your case, it will be on Server 5.
  In addition, since you don't have only one target, then you have the advantage that you can install only one officer and it works.
  Just keep in mind, that during the installation of the agent on the Server 5
  Server2 and server4 serveur3 must be visible to Server 5.

  To further explain the above statement,
  We have Filesystems FS1, FS2, on which the source files are located.
  And the agent is on ORADB1 that is the target Oracle DB. FS1 and FS2 file systems are visible to the system on which ORADB1 is installed and that is why the agent on ORADB1 can also see file systems and so access the files for processing.

  HTH

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337