corresponds to the model function

Hello

IM using the "model match" function in labview.

But when I use the example below, it does not, when you change the '.' to '=' at the time of entry it works.

Why can't use a '.'?

GR,

Hello

Use a backslash and the dot '. 'for seaching for the string'.' This will solve your problem

Kind regards

Amine31

(Give the congratulations to the right answers and Mark as a solution if your problem is resolved)

Tags: NI Software

Similar Questions

Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

Hi all

I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

But in this case, when I run it, it shows the error I mentioned in the subject line.

If you need more information about my project to identify the problem, please let me know.

Thanks in advance.

S ' Please example from model that comes with labview First
Go to labview Help > find examples and you can search for example.
-You create model with angle range and what kind of special criteria you want to use.
-To do this you must use IMAQ learn pattern before using IMAQ model Match 4
Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

WARNING: [39028] "DAC" database functions do not correspond to the default values.
Hi guys

I get after warning while I try to check the consistency of my deposit.

[39028] "DAC" database functions do not correspond to the default values. This can cause problems of application.

How can I get rid of this error?

Thank you
Saurabh
Hello

Double-click the field not in the connection pool you can click tab features

Maximum, Count Distinct functions in the model.
Hello

I have a set of data that I tried to regroup for a report.
I need in the report so that I have product code list in a column and Max (Product Code) in another column product code, product code Sub are strings and not numbers.

Suppose that my data set has

product code:-product-sub-code
____________________________

ABC | 1A
ABC | 1 b
ABC | 1 c
def | 1 B
def | 2B
def | 2 c
...
...
....
...
...

I need to report

ABC | 1A
def | 2B

..

I gathered it and I tried to show the Max (product code) for the current group. But it gave me a number instead of text. I tried to select 'text' to the form field. But it is automatically change the number.

Also, can you let me know how to write the number (code of separate by-product). I must also add that column.

I can't add in SQL because there are tons of models on this data set. I have to do it in the model.

Any help is greately appreciated.
Try using this: -substitute your domain under product code name

Thank you
Bipuser

How to make a layer corresponds to the size of the model?

Rather than drag the corner points and a layer to make it fit the size of the model (1920 x 1080) to the eye, is there a typo or a method that will do it automatically and accurately?

Not quite sure what you're saying. As lasvideo said, the size can easily be defined for solids. For everything else you can wanan look the Fayer--> Transform editing options in the menu and the associated keys...

Mylenium

Out of sync a station with the model of batch process?

Hello

My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

Thank you!

NTT says:

Doug,

Thanks for your reply.

I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

Thang

As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

Hope this helps,

-Doug

Performance of the aggregate function.

Hello

Version 11.2.0 Oracle

I'm not a PL/SQL Developer, however, I decided to write this aggregate out function. Oracle has it but I tried TimesTen database in memory that does not yet function stddev.

The code is as follows:

CREATE OR REPLACE TYPE MyStddevImpl AS OBJECT
(
  v_power NUMBER, -- sum(power^2) of the column
  v_sum   NUMBER, -- average value
  v_iteration NUMBER, -- count(1)

  STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT MyStddevImpl)
    RETURN number,

  MEMBER FUNCTION ODCIAggregateIterate(self IN OUT MyStddevImpl,
    value IN number)
    RETURN number,

  MEMBER FUNCTION ODCIAggregateTerminate(self IN MyStddevImpl,
    returnValue OUT number, flags IN number)
    RETURN number,

  MEMBER FUNCTION ODCIAggregateMerge(self IN OUT MyStddevImpl,
   ctx2 IN MyStddevImpl)
   RETURN number
);
/
show error

CREATE OR REPLACE TYPE BODY MyStddevImpl
AS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT MyStddevImpl)
RETURN number
AS
BEGIN
  sctx := MyStddevImpl(0,0,0);
  RETURN ODCIConst.Success;
END;

MEMBER FUNCTION ODCIAggregateIterate(self IN OUT MyStddevImpl, value IN number)
RETURN number
AS
BEGIN
  self.v_sum   := self.v_sum + value;   -- used to get averages
  self.v_power := self.v_power + power(value,2);
  self.v_iteration := self.v_iteration + 1;  -- total  number of rows
  return ODCIConst.Success;
END;

MEMBER FUNCTION ODCIAggregateTerminate(self IN MyStddevImpl, returnValue OUT
                                       number, flags IN number)
RETURN number
AS
  v_avg number;
BEGIN
  v_avg :=  self.v_sum/self.v_iteration;   -- this is the average value
   -- sqrt((sum(power(amount_sold,2))-(count(1)*power(avg(amount_sold),2)))/(count(1)-1))
  returnValue := sqrt((self.v_power - (self.v_iteration * power(v_avg,2))) /(self.v_iteration-1));
  RETURN ODCIConst.Success;
EXCEPTION
  WHEN VALUE_ERROR
  THEN
    RETURN ODCIConst.error;
END;

MEMBER FUNCTION ODCIAggregateMerge(self IN OUT MyStddevImpl, ctx2 IN
MyStddevImpl)
RETURN number
AS
BEGIN
 RETURN ODCIConst.Success;
END;
END;
/
show error
CREATE OR REPLACE FUNCTION MyStddev (input NUMBER)
RETURN number
AGGREGATE USING MyStddevImpl;
/
show error
exit

Now, it works very well and returns the results OK.

select mystddev(amount_sold) AS "My standard deviation", stddev(amount_sold) from sales;

My standard deviation STDDEV(AMOUNT_SOLD)
--------------------- -------------------
            259.78049           259.78049

The problem I have is that it takes 10.5 sec to run

 select mystddev(amount_sold) from ssdtester.sales;

MYSTDDEV(AMOUNT_SOLD)
---------------------
           273.172955

Elapsed: 00:00:10.48

Execution Plan
----------------------------------------------------------
Plan hash value: 1047182207

----------------------------------------------------------------------------
| Id  | Operation          | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
----------------------------------------------------------------------------
|   0 | SELECT STATEMENT   |       |     1 |     5 |  1324   (1)| 00:00:16 |
|   1 |  SORT AGGREGATE    |       |     1 |     5 |            |          |
|   2 |   TABLE ACCESS FULL| SALES |  1000K|  4882K|  1324   (1)| 00:00:16 |
----------------------------------------------------------------------------


Statistics
----------------------------------------------------------
          1  recursive calls
          0  db block gets
       4965  consistent gets
          0  physical reads
          0  redo size
        558  bytes sent via SQL*Net to client
        524  bytes received via SQL*Net from client
          2  SQL*Net roundtrips to/from client
          0  sorts (memory)
          0  sorts (disk)
          1  rows processed

Is there any scope to improve this code. Specifically can I use avg function in the code instead of working on myself?

Thank you

Mich

Published by: Mich Talebzadeh on February 13, 2012 12:20

>
May I ask what is the purpose of the model of aggregate by Oracle functions if it will be row-by-row and he's not going to be effective.
>
Oracle online the way you did in your function.

Your function, using the technology of data cartridges, will be called by Oracle for EACH LINE it reads each line corresponding to your query. This requires a change in context of SQL, PL/SQL, and then back to SQL. It is a very expensive operation in terms of time.

The Oracle SQL engine is not that way for aggregate functions it provides. The functionality of data cartridge is provided to allow developers to extend Oracle to provide features that Oracle is not provde all. Use of these functions of cartridge cases, you develop may not be 'slow' because there is no equivalent Oracle to compare to. You can use the features of your new cartridge or do you without; you have no other choice.

You should always use SQL from Oracle to do the job unless you are doing something that can be done in SQL. Then you should use of Oracle PL/SQL features (for example in BULK of treatment) to do the more complex things. Finally if you need to do something just that Oracle cannot do with out-of-the-box SQL or PL/SQL, then you turn cartridge data, custom Java or C code or other external solutions which you can interface to Oracle.

The order of the solutions, you should look at is:
1 SQL
2 PL/SQL
3 Java/C external
4 data cartridge

He explains a little better? (and it is frankly win again in a minute or two!)

If I have the first generation iWatch I'll be able to get the update for new applications and look at faces? I know that I couldn't display or the waterproof function to the water.

If I have the first generation iWatch I'll be able to get the update for new applications and look at faces? I know that I couldn't display or the waterproof function to the water.

Hello

The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

We should go out on 13 September, after which it can be installed by following the steps detailed here:
- Update the software on your Apple Watch - Apple Support
More information:

http://www.Apple.com/Watchos/

How do you know the model number for my iPod Touch?

I need to find the model number for my iPod Touch - this is not about documentation or on the device itself.

I need to find it to buy a protector screen for her.

The screen protects tend to be sold by the name of generation, no model in my experience.

Protections that correspond to the 5th generation will adapt the 6th gen (and iPhone 5 screen covers are so because they are the same dimensions)

The 4th generation iPod is smaller than the 5th or 6th gen.

Having said that, the settings, General, about will give you your model number

It can also be printed on the back of your device, but the print is teeny tiney and almost the same color as your case (I need loop a jeweler to see mine)

Satellite Pro A300D - what is the model number for the keyboard?

My husband managed to dislodge a key on my keyboard CAP and broke the clip white scissors that holds up on... (don't ask me how)

He spoke of the authorized service center here in Norway and they sent us replacement scissors tongs (actually they sent an old non-functional keyboard), but the clips are of a different design to those on my laptop.

I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.

I really don't want to have to replace the entire keyboard when it's just 1 scissor clips which is broken... the laptop is only 5 months old.

Here are some pictures of the scissors clamp in question and where it attaches to the keyboard (sorry for quality)

Link: [http://img31.imageshack.us/gal.php?g=1000683o.jpg]

Thank you

notsure

Hello

Boyfriend sorry but it is not possible to exchange a few individual keys on a keyboard, so in this case, you must replace the full keyboard. But normally, it shouldn't be so difficult.
Either you exchange the keyboard yourself or you sent the laptop to the authorized service provider.

The model number for the keyboard is not known to me but contact your ASP! They can order all the parts of Toshiba and they should know the right part number.

Good bye

Corresponding to the current thread BSD process name: fseventsd

Got a new iMac that is causing me problems for a few weeks with crashing every 24 hours more or less at the same time (01:10 - 01-20 in the morning). Has made many controls, cleaned and repaired the disk removed third-party drivers like Toast or Avira: result is zero. I would be happy to receive any suggestions as to a solution.

Modellname: iMac

Modell-Identifizierung: iMac17, 1

Prozessortyp: Intel Core i7

Prozessorgeschwindigkeit: 4 GHz

Number of processors: 1

Gesamtanzahl der Kerné: 4

(Pro Kern) Cache L2: 256 KB

L3-Cache: 8 MB

Memory: 32 GB

Boot ROM Version: IM171.0105.B05

SMC-Version (System): 2.34f2

Serial number (System): DG * Q17

Material-UUID: F6CE3130-683C-5FF5-A857-F5FFB1E5DE33

Anonymous UUID: 8EA9D2FE-8E6E-C4D1-E2FF-192BE1AD40B0

Fri Jan 1 01:09:32 2016

Panic report *.

Panic (4 CPU): Processor is not responding (this CPU did not recognize interruptions) TLB status: 0x0

RAX: 0X00000000000002FF, RBX: 0XFFFFFF807244AA08 RCX: 0 X 0000000000000001, RDX: 0X00000000000034F8

RER: 0XFFFFFF83BC2F36B8, RBP: 0XFFFFFF83BC2F3720, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF807244AA0A

R8: 0XFFFFFF8011CE0B78, R9: 0XFFFFFF8011CE0B78, R10: 0XFFFFFF8011CE0B78 R11: 0X000034F84CBFF8F4

R12: 0XFFFFFF807244AA0A, R13: 0XFFFFFF8011C2CE90, R14: 0 X 0000000000000000, A15: 0 X 0000000000000001

RFL: 0 X 0000000000000086, RIP: 0XFFFFFF80115C3D4C, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

Backtrace (4 CPU), Frame: Return address

0xffffff83af08af80: 0xffffff80115d08cf

0xffffff83af08afd0: 0xffffff80115ef3f9

0xffffff83bc2f3720: 0xffffff7f9502c821

0xffffff83bc2f3950: 0xffffff7f95035d93

0xffffff83bc2f39a0: 0xffffff8011727dac

0xffffff83bc2f3a20: 0xffffff801171d50d

0xffffff83bc2f3c10: 0xffffff8011715ad3

0xffffff83bc2f3f30: 0xffffff801170aefa

0xffffff83bc2f3f60: 0xffffff8011a29ac1

0xffffff83bc2f3fb0: 0xffffff80115efa36

Extensions of core in backtrace:

com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff

dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000

Corresponding to the current thread BSD process name: fseventsd

Mac OS version:

15 C 50

Kernel version:

15.2.0 Darwin kernel version: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64

Kernel UUID: 17EA3101-D2E4-31BF-BDA9-931F51049F93

Slide kernel: 0 x 0000000011200000

Text of core base: 0xffffff8011400000

Text __HIB base: 0xffffff8011300000

Name of system model: iMac17, 1 (Mac-B809C3757DA9BB8D)

Availability of the system in nanoseconds: 58241635953938

last load kext to 8021022451320: com.parallels.kext.vnic 11.1.2 32408 (addr 0xffffff7f950be000 size 32768)

Finally unloaded kext to 8116132315148: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f95063000 size 32768)

kexts responsible:

com Parallels.kext.vNIC 11.1.2 32408

com.Parallels.kext.netbridge 11.1.2 32408

com Parallels.kext.Hypervisor 11.1.2 32408

com Parallels.kext.USBConnect 11.1.2 32408

com Parallels.virtualhid 1.0.3 3

com Parallels.Virtualsound 1.0.36 36

com.promise.Driver.STEX 5.2.10

com Apple.filesystems.smbfs 3.0.0

com Apple.filesystems.afpfs 11.0

com Apple.NKE.asp - tcp 8.0.0

com.apple.driver.AppleTopCaseHIDEventDriver 86

com.apple.driver.AppleHSBluetoothDriver 86

com Apple.filesystems.autofs 3.0

com.apple.driver.X86PlatformShim 1.0.0

com.apple.driver.AGPM 110.20.21

com.apple.driver.ApplePlatformEnabler 2.6.0d0

com.apple.driver.AudioAUUC 1.70

com.apple.driver.AppleOSXWatchdog 1

com.apple.driver.AppleMikeyHIDDriver 124

com.apple.driver.AppleMikeyDriver 272.51.3

com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

com.apple.driver.AppleHDA 272.51.3

com.apple.driver.AppleUpstreamUserClient 3.6.1

com Apple.Driver.pmtelemetry 1

com.apple.iokit.IOUserEthernet 1.0.1

com.apple.kext.AMDFramebuffer 1.4.0

com.apple.driver.AppleIntelSKLGraphics 10.1.2

com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

com.apple.driver.AppleSMCLMU 208

com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

com.apple.AMDRadeonX4000 1.4.0

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.driver.AppleHV 1

com.apple.driver.AppleIntelPCHPMC 1.0

com.apple.driver.AppleMCCSControl 1.2.13

com.apple.kext.AMD9000Controller 1.4.0

com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.2

com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

com.apple.driver.AppleThunderboltIP 3.0.8

com.apple.driver.AppleThunderboltUTDM 3.0.0

com.apple.iokit.SCSITaskUserClient 3.7.7

com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

com.apple.BootCache 38

com.apple.driver.AppleUSBODD 3.7.1

2.8.5 com.apple.iokit.IOAHCIBlockStorage

com.apple.iokit.AppleIntelI210Ethernet 2.2.1b3

com.apple.driver.AppleSDXC 1.7.0

com.apple.iokit.AppleBCM5701Ethernet 10.1.12

com.apple.driver.AirPort.Brcm4360 1020.17.1a1

com.apple.driver.AppleAHCIPort 3.1.8

com.apple.driver.AppleHPET 1.8

com.apple.driver.AppleRTC 2.0

com.apple.driver.AppleACPIButtons 4.0

com.apple.driver.AppleSMBIOS 2.1

com.apple.driver.AppleACPIEC 4.0

com.apple.driver.AppleAPIC 1.7

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3

com.apple.security.TMSafetyNet 8

com.apple.security.SecureRemotePassword 1.0

com.apple.driver.AppleHIDKeyboard 181

com.apple.driver.AppleMultitouchDriver 304.10

com.apple.driver.AppleHIDTransport 5

com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

com Apple.kext.Triggers 1.0

com.apple.driver.DspFuncLib 272.51.3

com.apple.kext.OSvKernDSPLib 525

com.apple.iokit.IOSurface 108.0.1

com.apple.iokit.IOSerialFamily 11

com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

com.apple.driver.AppleGraphicsControl 3.12.6

com.apple.driver.X86PlatformPlugin 1.0.0

com.apple.iokit.IOBluetoothFamily 4.4.3f4

com.apple.driver.CoreCaptureResponder 1

com.apple.driver.IOPlatformPluginFamily 6.0.0d7

com.apple.driver.AppleHDAController 272.51.3

com.apple.iokit.IOHDAFamily 272.51.3

com.apple.iokit.IONDRVSupport 2.4.1

com.apple.driver.AppleSMBusController 1.0.14d1

com.apple.driver.AppleSMC 3.1.9

com.apple.kext.AMDSupport 1.4.0

com.apple.AppleGraphicsDeviceControl 3.12.6

com.apple.iokit.IOAcceleratorFamily2 203.14

com.apple.iokit.IOGraphicsFamily 2.4.1

com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

com.apple.driver.AppleSMBusPCI 1.0.14d1

com.apple.driver.AppleThunderboltEDMSink 4.1.1

com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

com.apple.driver.AppleUSBAudio 302.15

com.apple.iokit.IOAudioFamily 204.3

com.apple.vecLib.kext 1.2.0

com.apple.driver.CoreStorage 517.20.1

com.apple.driver.usb.AppleUSBHub 1.0.1

com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

com.apple.iokit.IOBDStorageFamily 1.8

com.apple.iokit.IODVDStorageFamily 1.8

com.apple.iokit.IOCDStorageFamily 1.8

com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

com.apple.iokit.IOUSBMassStorageDriver 1.0.0

com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

com.apple.iokit.IOSCSIParallelFamily 3.0.0

com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

com.apple.driver.AppleThunderboltNHI 4.0.4

com.apple.iokit.IOThunderboltFamily 5.1.0

com.apple.iokit.IOEthernetAVBController 1.0.3b3

com.apple.iokit.IO80211Family 1110.26

com.apple.driver.mDNSOffloadUserClient 1.0.1b8

com.apple.iokit.IONetworkingFamily 3.2

com Apple.Driver.corecapture 1.0.4

com.apple.driver.AppleUSBMergeNub 900.4.1

com.apple.iokit.IOAHCIFamily 2.8.1

com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

com.apple.driver.usb.AppleUSBXHCI 1.0.1

com.apple.iokit.IOUSBFamily 900.4.1

com.apple.iokit.IOUSBHostFamily 1.0.1

com.apple.driver.AppleUSBHostMergeProperties 1.0.1

com.apple.driver.AppleEFINVRAM 2.0

com.apple.driver.AppleEFIRuntime 2.0

com.apple.iokit.IOHIDFamily 2.0.0

com.apple.iokit.IOSMBusFamily 1.1

com Apple.Security.sandbox 300.0

com.apple.kext.AppleMatch 1.0.0d1

com.apple.driver.AppleKeyStore 2

com.apple.driver.AppleMobileFileIntegrity 1.0.5

com.apple.driver.AppleCredentialManager 1.0

com.apple.driver.DiskImages 417.1

com.apple.iokit.IOStorageFamily 2.1

com.apple.iokit.IOReportFamily 31

com.apple.driver.AppleFDEKeyStore 28.30

com.apple.driver.AppleACPIPlatform 4.0

com.apple.iokit.IOPCIFamily 2.9

com.apple.iokit.IOACPIFamily 1.4

com.apple.kec.Libm 1

com Apple.KEC.pthread 1

com Apple.KEC.corecrypto 1.0

Panic (CPU 6): Processor is not responding (this CPU did not recognize interruptions) TLB status: 0x0

RAX: 0X00000000000002FF, RBX: 0XFFFFFF807244AA08 RCX: 0 X 0000000000000001, RDX: 0X00000000000034F8

RER: 0XFFFFFF803AD5B6B8, RBP: 0XFFFFFF803AD5B720, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF807244AA0A

R8: 0X000000000098923D, R9: 0XFFFFFF80515FD8C8, R10: 0 X 0000000000000000, R11: 0X000034F84CC02E70

R12: 0XFFFFFF807244AA0A, R13: 0XFFFFFF8011C2CE90, R14: 0XFFFFFF807244AA0A R15: 0 X 0000000000000001

RFL: 0 X 0000000000000086, RIP: 0XFFFFFF80115C3D3D, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

Backtrace (CPU 6), frame: return address

0xffffff83af0a9f80: 0xffffff80115d08cf

0xffffff83af0a9fd0: 0xffffff80115ef3f9

0xffffff803ad5b720: 0xffffff7f9502c815

0xffffff803ad5b950: 0xffffff7f95035d93

0xffffff803ad5b9a0: 0xffffff8011727dac

0xffffff803ad5ba20: 0xffffff801171d50d

0xffffff803ad5bc10: 0xffffff8011715ad3

0xffffff803ad5bf30: 0xffffff801170aefa

0xffffff803ad5bf60: 0xffffff8011a29ac1

0xffffff803ad5bfb0: 0xffffff80115efa36

Extensions of core in backtrace:

com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff

dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000

Corresponding to the current thread BSD process name: fseventsd

panic (the appellant 2 cpu 0xffffff80115b01fa): "TLB invalidation IPI timeout:" "CPU has not responded to interruptions, on which the bitmap of the CPU: 0 x 50, accused of receiving NMIPI: orig: 0x0, now: 0x2"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.20.55/osfmk/x86_64/pmap .c:2594 ' "."

Backtrace (2 CPU), Frame: Return address

0xffffff803ada3360: 0xffffff80114de792

0xffffff803ada33e0: 0xffffff80115b01fa

0xffffff803ada3480: 0xffffff80115b705b

0xffffff803ada3570: 0xffffff80115b7d86

0xffffff803ada35e0: 0xffffff8011563da5

0xffffff803ada36f0: 0xffffff801155934c

0xffffff803ada3720: 0xffffff8011554813

0xffffff803ada3750: 0xffffff80114e814d

0xffffff803ada3770: 0xffffff7f9503791c

0xffffff803ada3d20: 0xffffff801170cd32

0xffffff803ada3de0: 0xffffff80117188bc

0xffffff803ada3f30: 0xffffff801170d187

0xffffff803ada3f60: 0xffffff8011a29ac1

0xffffff803ada3fb0: 0xffffff80115efa36

Extensions of core in backtrace:

com Apple.filesystems.afpfs (11.0) [0CD2CFC3-9E8A-3627-94FA-9BBAF7577FA4] @0xfffff f7f9500f000-> 0xffffff7f95062fff

dependency: com.apple.security.SecureRemotePassword (1.0) [3E335294-B4F5-320 c-B431-A16D53C3EE 29]@0xffffff7f94ffd000

Corresponding to the current thread BSD process name: find

System profile:

Graphics card: AMD Radeon M395X, AMD Radeon M395X, PCIe, 4096 MB R9 R9

Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x14A), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

PCI card: pci105a, 8760, controller RAID, Thunderbolt@10,0,0

PCI card: pci1b73, Thunderbolt@196,0,0 1100, USB eXtensible Host Controller.

PCI card: ethernet, Ethernet Controller, Thunderbolt@195,0,0

PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@16,0,0

PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@15,0,0

PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@14,0,0

PCI card: pci1b21, 1142, expandable USB Host Controller, Thunderbolt@13,0,0

Bus crush: iMac, Apple Inc., 28.1

Lightning device: Pegasus series R, Promise Technology, Inc., 1: 22.2

Lightning device: Thunderbolt 2 Express Dock HD, Belkin International, Inc., 3, 25.1

Memory module: DIMM0/0, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020

Memory module: DIMM1/0, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020

Memory module: DIMM0/1, 8 GB DDR3, BANK 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020

Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1867 MHz, 0x80AD, 0x484D54343147533642465238412D52442020

USB device: USB 3.0 Bus

USB device: 4-port USB 3.0 Hub

USB Device: USB Bluetooth host controller

USB device: FaceTime HD camera (built-in)

USB device: Apple USB SuperDrive

USB device: USB 2.0 Hub

USB device: MB86C311

USB device: Laptop SSD

USB device: USB 2.0 Hub [MTT]

USB device: Wacom Wireless Receiver

USB device: USB 3.0 Bus

USB device: SSD laptop T1

USB device: DTHX Predator

USB device: USB audio CODEC

USB device: USB 3.0 Bus

USB device: WorkflowD512

USB device: USB 3.0 Bus

USB device: WorkflowD512

USB device: USB 3.0 Bus

USB device: WorkflowXR1

USB device: USB 3.0 Bus

USB device: WorkflowCFR1

Serial ATA Device: APPLE SSD SM1024G, 1 TB

Network service: Wi - Fi, AirPort, en1

Model: iMac17, 1, IM171.0105.B05 of BootROM, 4 processors, Intel Core i7 4 GHz, 32 GB, MSC 2.34f2

Even if you have installed a third-party software ('Parallels' and a 'Promise' device driver) who is likely to cause a kernel panic, the kind of panic you are most likely caused by a hardware failure. I suggest that you take the machine to an Apple Retail Store or other provider of services allowed for a stable service and guaranteed, if necessary.

How to connect the parallel test using the logarithmic function Teststand database result

Hello

How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database

I use Labview 2013, 2013 Teststand and sequential model.

The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.

Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)

TKS

What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

I have a question about the order of execution. In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter. In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine. It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

(1.) I'm a little confused on what the meter of the READ function is back because it's a table. What is a picture of? I thought that it was up to the value of the individual periods between rising edges. The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table? Are the elements of the array the individual delays between the edges? How many values are stored in the array by executing? We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what. How to understand the composition of this painting? How can I change the composition of this painting? Is it possible to measure only one period at a time, for example the time between TWO edges?

2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop? In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported. The structure for the delivery of vi will be attached data in pairs like this? I understand that one of the READING functions run not before the other function of READING in the WHILE loop. I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

Thank you

Dave

Hi David,

I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

Kind regards

Jason D

Technical sales engineer

National Instruments

VDM 2012 Algorithms.MatchPattern2 SP1 has the image of the model

My application requires (acquisition and treatment) fast enough repetitive image<100ms per="" cycle).="" kind="" of="" "realtime"="" processing,="" i'd="" prefer="" not="" doing="" post="" image="">

Currently the image processing takes ~ 200ms per cycle (mainly grey filtering image).

~ 150ms of this time is taken by load images from disk or cloning model images of the model (using the flatten/unflatten visionimage).

The reload or cloning is that the Algorithms.MatchPattern2 has the image of the model during execution, i.e. I have to reload or clone images model each acquisition/processing cycle.

Ideally, configuration I would like to provide 1 x set of images of model for processing application that is reused (without cloning) each treatment cycle to a time of 50ms ~ process.

Patches or a workaounds?

Thanks for the reply Rob.

Note: I use .net VDM and coding in c# libraries.

My purchase is decoupled from my transformation. The main reason to mention the acquisition should provide a bit of context to my question.

I first thought that my large KING was originally the processing time increased (initial duration process = ~ 230ms). Then I reduced the sizes of my Kings and improved the execution time = ~ 190ms.

I am currently creating a model images table and passing to the function (essentially by 9 x 1 x OCR and correspondence to the model) image processing.

When I remove the model image cloning code (visionimage flatten/unflatten), the image processing function runs in 50-60ms but runs only once. On the second cycle of the excution, it throws an exception.

"Cannot access a deleted object."
«Object name: "NationalInstruments.Vision.VisionImage".»

I'll try MatchPattern 3... My current version doesn't have a MatchPattern 4.

Some performances are not completed to help put an end to everything in the model of parallel processes

Hello

This question confued me recently, I would use a parallel process of model and to finish running at the same time.

If there are action steps in order, it seemed that will put an end to the execution of all.

However, I put a wait instead of steps of the action function, there are a few executions not interrupted while I pressed the button finish everything in the toolbar.

Hope someone can give me help. Thank you very much.

PS. the number of testsockets has the value 9 in my teststand.

I ran your sequence again, and I have reproduced the issue.

It seems the action of the polls Test for success/failure of the VI at full speed.

It will consume your CPU resource to 100%.

So I add some delay in the VI to prevent election full speed.

Please see the following block diagram.

I tried and it seems resolved the problem.

Ting

corresponds to the model function

Similar Questions

Maybe you are looking for