Corrupted profile and the profile "User" generated by Windows

Similar Questions

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• Remote Desktop - conflict between the remote control and the host user?

  We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.

  What happens when:

  1. the remote user tries to connect to the Windows host computer while someone is working on it?

  2. a person is trying to work on the host computer, and the remote user is logged?

  Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?

  DRM for any assistance you can provide.

  Stuart A. Forsyth

  E-mail address is removed from the privacy *.

  Hi Stuart,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  For reference:
  http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-7

  Thank you

• Cisco ISE and the fast user switching

  Greetings,

  In our deployment, we are interested in using the "fast user switching" which lies in the functionality of Windows.   After searching for a while, I see that the native Windows supplicant is not compatible with the fast user switching.   It does not appear that Anyconnect is either.   Can you please inform me as to what suppluicant, I need research to enable the functionality of Switchign user?

  We currently use ISE 1.2 Patch 4.

  Thank you for any assistance.

  David

  Cisco EHT NAC Agent does not support Windows fast user change when you use the native supplicant. This is because there is not clearly the older user disconnecting. When a new user is sent, the Agent is hung on the ID process and the old user session and therefore a new posture cannot take place. According to Microsoft Security policy, it is recommended to disable the fast user switching.

  Source:

  http://www.Cisco.com/en/us/docs/security/ISE/1.2/user_guide/ise_pos_pol.html

• Why in the context menu of the "open in a new tab" and the "open in a new window" - buttons change of place? And you can change it back?

  With the Firefox 4 RC, the 'open in a new tab' and the 'open in a new window' - buttons have changed places. This is quite annoying because I normally do without looking, but now it always opens in a new window instead of a new tab. Is it possible to restore it? Perhaps in your own settings?

  You can use the menu editor extension to reorganize menu items - https://addons.mozilla.org/firefox/addon/menu-editor

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• How can I reset the permission to receive downloaded programs? This authorization has changed and I don't know why. I am the owner and the only user of this computer.

  After a long work, I learned that I'm unable to download programs such as Adobe Flash and Microsoft Security Scan.  In fact, they do not enter the folder C:\USERS\CLAUDE\DOWNLOADS\---mais they may not be recognized by the operating system (SYS 7) because for some reason any access is denied.  I looked at the book and find that Claude file is locked.  I don't know how it happened.  I tried to see how to unlock but again without success.  Can you help me?

  Thank you

  Hi Claude1112,

  Looks like you can't access the download folder. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. have logged as administrator?

  Method 1.

  Start the computer in safe mode and check if you can access the downloads folder.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

   

  Method 3.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• How have use ACS supported wireless users and the VPN user?

  I'm new to ACS and configure the following requirement:

  (1) ACS to authenticate users wireless with window AD.

  (2) once connected successfully to the radio, the user must use VPN for remote access with the ASA.

  (3) the end-user will have only 1 common username but different password.

  for example:

  username: password: cisco: cisco wireless.

  username: cisco password: 1234 for VPN.

  ACS support can this, if yes how can we do? Do I need 2 sets of ACS?

  Yes, acs should work properly according to your need.

  ACS, we have a feature called NAP "network access profile" where we can define the condition based on ip source or attributes which allow to say if the request comes from wireless device acs will forward to AD and if the request is of the acs VPN will forward to this diff of database.

  Basically, we need to use two acs database.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/NAPs.html

  Kind regards

  ~ JG

  Note the useful messages

• I am not recognized as the administrator. I am owner of the computer and the only user

  If anyone has any suggestions, they will be greatly appreciated.

  For as long as I had my HP G60-235DX notebook pc with windows vista. It won't recognize me as the administrator. I am the only user and the owner. I checked under the control panel in the user accounts, and he said im set as an administrator but when some programs want to run it says I must have administrator privileges and then stops the program. Any help would be good.

  You do a right click on the program > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Unable to load because the system registry is missing or corrupted state 0x000014c and the cd cannot read HP windows vista recovery disc

  Windows vista HP didn't not load because the system registry is missing or corrupted state 0x000014c and the cd cannot read the recovery disk, could someone help, thanks

  Hello help 757,

  My apologies for the delay in the answer here.

  We need to check the BIOS of the machine and make sure that the CD drive is the first boot device.

  When this is complete, we can use the following article:

  http://support.Microsoft.com/kb/307545

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Impossible to delete a user account, even though I am the administrator and the only user of my PC

  Hello, you who knows:

  My OS is Vista Home Premium SP2 and I am the only user and
  administrator.
  ... But the other week, unable to access one of my files, I created
  another administrator account, which appears as a different user on
  my welcome window, but I couldn't do much with.

  Therefore, I decided that it would be a useless account for me to
  have created.
  ... How can I remove this 'new' alternate administrator account?
  For some strange reason, Vista Home Premium doesn't have
  an option 'remove' or 'delete '.

  Can someone knowledgeable computer please tell me what I can do
  to remove this other account?
  I do not see it when my welcome window opens.

  Thank you for your attention to this.
  marlem388

  Dear noomene K,

  What a beauty to hear from you again and to see all of your great advice!

  Your instructions to cancel/hide delinquency counts that I myself
  created were certainly useful

  ... Unfortunately, and despite everything, the problem remains.

  I therefore scoured Internet for some other answer and found a
  prompt command, I decided to try.
  -Says the command prompt: net user administrator /active: Yes, I have
  used for the account I wanted to keep and continue to use.

  -And then I went to the user account window that I wanted to cancel
  and placed the command prompt: net user administrator / active: No..

  Who took care of my problem!

  But you gave me a few instructions very well anyway, and I really appreciate
  your help.

  Thank you.
  marlem388

• Location of Composites of the EBS and the deployment Plan generator

  Hi all
  I have a question of high level on the AIA.
  I understand that a PIP (process integration Pack) is an integration of end to end into the information system from one end to the other. If the names of a pip could be:
  SAP for integration of Ebiz invoice
  Ebiz integration Portal invoice
  Etc.
  I also understand that a BSE (Business Enterprise) is a reusable service that can be invoked by a number of different applicants. For example, InvoiceEBS, etc.
  My understanding is that an EBS can be part of many glitches.
  
  I worked through the update and I got to the point of using the deployment Plan generator to generate a deployment plan. When you run it I came across this message:
  [java] EBS composites should be under $AIA_HOME/pips / < projectCode > or $AIA_HOME/pips / < projectIndustry > / < projectCode > for the seeds of the industry.
  [java] The CBA and the AdapterServices must be under $AIA_HOME/services.
  
  That said, it is expected that the composite EBS under the directory of a PIP in particular. This means that if SAP_to_Ebiz_Invoice_Int and Portal_to_Ebiz_Invoice_Int use the same EBS then composite EBS must be duplicated in the two directories. This is clearly wrong that we would have to keep several copies. (This has implications for maintenance, Version control, etc.)
  
  It is not sensible, so there must be an error in my logic. Does anyone know where I have gone wrong?
  Oracle expects that in a few years when we need to make an update to BSE or other objects in the PIP as go us back and use the same project in PLW or should we create a new project in PLW and add all objects?
  
  Thank you
  Robert

  Robert,
  I checked with the genius of the FP and it comes to new behaviors introduced with 11.1.1.4 that I wasn't aware of the institutions. I have recorded a request for internal improvement because I think that it is not ideal for the clients of the FP.

  It seems it must be under $AIA_HOME/pips /, where is the code that you have entered in the PLW and you would also find in the BOM.xml. Have you tried both?

  Just to make sure that I understood: the error means only that RFP generator cannot find the composite and, therefore, can not assing a path to the composite in the DP and you will need to add that manually. Or is the generation of DP even stop alltogether?

  Gerhard

• where are the location server log and the dimension to generate the error file located?

  I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
  
  Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
  file log of worm and the dimension generate file for possible more info...
  
  Thank you

  I guess you are on Version 11 as your last post was on this version.

  You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
  If you load using maxl you should have a file of errors defined in the script.
  Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/