Corrupted .wav file?

Similar Questions

• Corrupted wav files in Adobe but plays fine in other applications

  I have a few old projects that have been backed up several times.  The problem is that some of the sound files appear corrupted when I load into Adobe Audition.  The sound plays all distorted with clicks/POPs VERY STRONG in it.  However, I can play the same files very well in any standard player (Winamp, WMP, VLC player)

  I tried to open the project in the new hearing, but same thing happens.  I also tried the option "Open in" and specifying what windows reports as sample rate etc. but it comes out the same.  Most of the other files wav in projects work very well, but here and there, like that and prevents me from remixing anything whatsoever.  Worst case I guess I could read the file in winamp and record it but then I would have to match the calendar and everything and I just do not have the motivation to do it on all of these projects.

  http://home.Comcast.NET/~chicken3/Track17.zip

  It is one of the files if someone wants to take a moment and look at him.  I do not understand why winamp and all of them can play very well if it has been damaged in any way, another VLC I know does not need the file headers to play correctly most of the time.

  Here is a picture of what looks like the wave at the hearing.  Oh, and Reaper reads files very well, if I had all my wav files to the bottom, I had just paste the whole project in Reaper and remix but unfortunately I cut all the files already trimmed.

  

  I downloaded your file, as you say it opens fine in Reaper. And is considered to be 32 bits (int), which is not commonly used format. But in AA3, it is declared as floating 16.8 which was the old Cool Edit 32 bit format used to return & exclusive to them.

  I open your file in Reaper made the new form taken, unsurprisingly, the file opens correctly in AA3. I happened to have my record files saved as 24-bit int, but all this is very configurable in Reaper.

  BTW, such that it appears as your Session file is not damaged but only some files Wav AA should give you all of your changes, fades etc. very well with a bunch of PMExport reaper 32-bit float.

  I guess that your installation of AA is ok with the 32bits uncorrupted files 'normal '?

  If so there are a few things more like moving files & get the newly returned to be the same file names only in the ITS of the AA.

  John L

• Wave files will not play in Windows Media Player 11

  Windows media player11 will not play files WAV. as:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. what exactly happens when you try to play .wav files?
  2 How long have you been faced with this problem?
  3. this happens with a particular .wmv file?

  Step 1: Try to uninstall the codecs that are installed.

  See the below items for more information.
  http://support.Microsoft.com/kb/307895
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (You can also use this article for windows XP)

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files.

  a. click the Start button > run > typecmd.exe and press ENTER.
  b. Type sfc/scannow , and then press ENTER.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Huge problem, cannot delete the WAV file.

  I have the WAV file on my desktop that I can't move, delete, rename or the properties view.  It is a way by using 100% of my CPU and slow down at all.

  Whenever I try to delete it, it says "preparing to recycle...". "and never finished.

  I'm about to reinstall my operating system because I don't know any other solution.

  Hello

  Run the check point kill too extreme.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Sides of WMP not saved in wav files

  Hello

  Windows Media Player saves my ratings of mp3 files, but not of wav files. Is there a way to save the wav files sides because most of my music library is wav files and when I reformat I lose all my songs alongside.

  Hello

  It may occur if the Windows Media Player settings are corrupt. Run the Windows Media Player settings troubelshooter which fixes the configuration settings.

  
  

  Follow the steps below and we update on the State of the question.

  Method 1: Open the troubleshooter in the Windows Media Player settings. Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2: I would recommend you to rebuild the database of Windows Media Player and then check the status of the side shown.

  Here's how:
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
   
  Note: Windows Media Player automatically rebuilds the database.
   
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.

  If the problem still exists, as a work around you, try to convert WAV files to MP3 and save the notes.

  I hope that the above information is useful.

• I added a few. WAV files and you want to add the artist names and album

  I added a few. Recording WAV files form a USB turntable.  How can I add the name of the artist and album in iTunes before you convert them into MP3 files to load on a player MP #?

  For all types of files you can call by clicking on the location of the name / artist, when it is selected. It should be more when you convert the.

• WAV files will not play in Firefox 22

  WAV files will not play in Firefox 22. Previous versions of Firefox are very good. Another sound is fine. I have the latest mac OS X. QuickTime is required to play wav files. I have the latest version of it.

  Is there any solution for this?

  Are there other plugins that I can install that will play wav files?

  
  

• .wav files do not play in firefox 3.6.13

  I wrote index.html file and coded the following and the .wav file is also in the same folder where the HTML file is saved,

  < title > wav files < / title >

  < bgsound loop = "5" src = "hello.wav" > < / bgsound >

  Can you post a link?

  The Windows Media Player plugin will be usable with the code shown above (application/x-mplayer2).
  
  You have only the old plugin in WMP (classic) (Npdsplay.dll) in your list of system details, then you can try to install the new WMP plugin to see if it works.

  See:

  • http://KB.mozillazine.org/Windows_Media_Player#Missing_plugin

• Removal of WAV files after you create AAC version in iTunes

  I recently deleted about 5 GB of iTunes WAV files after their conversion to AAC files. I chose to "move to trash" and then empty the trash. When I rebooted my computer, there is about 5 GB of free storage added to my HD but not the Audio storage, which has not changed. I forgot to check the free space came as I thought it would be audio.

  I tried manually deleted WAV files and they do not appear on my HD, only new AAC versions I created. I'm curious to know why the Audio storage did not change at all, even if the files are audio files and seem to have been properly removed from my HD. I wonder if they were not stored somewhere else and if so I want to make sure that they have been deleted. What worries me is that my iTunes library is 94 Go yet my Audio storage is 126 GB. I understand Garageband, etc. takes place, but the gap seems to be excessive. Please help/explain whether you have any ideas!

  Much appreciated!

  You'd better ask about the way in which the information system is referred to in the forum system for your computer. If it were me, I'd be just glad if you removed 5 GB of files 5 GB have been released.  If you want more details, try a specific tool like OmniDiskSweeper: https://www.omnigroup.com/more/

• import a WAV file into iTunes?

  Can someone explain to me how do I import a WAV file into iTunes? I'm dragging in, right/option clicking on the file and go - open in iTunes but nothing happens and I can't play or do anything with it. Thank you

  It adds no doubt, but given that WAV files do not contain track information is to find with no name of the album and as the file name for a song title. Look in your recently added playlist.

• iTunes conversion of WAV files

  I am in itunes on a pc running Windows 7 is more the opportunity to convert songs to mp3. I can, however, convert to WAV files. I don't understand not the point of this, because itunes purchases are downloaded to the lossy AAC format. How can these files be converted to WAV lossless data must already have been lost in the initial compression? Can someone explain in terms very SIMPLE, as I am a technologically challenged person.

  Thank you

  WAV setting is useful especially to import audio from a CD. If someone wanted their music is in mp3 format, then why would they shop at the iTunes Store? I don't understand the point of this, when Amazon.com offers a very wide music selection. Maybe someone can explain in terms very simple?

• The NWZ - A17 will support. WAV files?

  I think to buy the NWZ - A17, but I can't determine if it is supported. WAV files. Some critics say yes, others say no. Everyone was able to record. WAV files?

  Hi richrunk,

  Welcome to the community of Sony!

  This Walkman supports. WAV file format.

  For a complete list of supported formats, pls refer to this link:

  http://docs.eSupport.Sony.com/Portable/2014/NWZ-A15_A17_guide/en/contents/TP0000428536.html?search=f...

  If my post answered your question, please mark it as "accept as a Solution.

  Thank you

  -Anthony

• Read the wav file

  Hi all

  is it possible to play a wav file and then treat it?

  Thank you

  I give an example that might, greetings

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• Wave files

  I'm looking to read wav files on my computer and print via a card DAQmx. I know that I could do more if I do not rely on express screws, but I was wondering if there is any way that I could always use the express VI DAQ Assistant to display the .wav files. I don't think so because .wav is not one of the options for the type of file, I just thought I'd ask anyway. Thank you

  Have you done a search? As described in the recent post at http://forums.ni.com/t5/LabVIEW/How-do-I-write-a-wav-file-to-analog-output/m-p/2929736/highlight/tru... you use playback of the sound file. This returns a data type of waveform that can be converted to the type of dynamic data wrong.