Cosmetic change: adding space in an area of the tree!

Similar Questions

• Changing settings predefined once documents are in the book.

  1. I already had eight chapters when I decided that my space between the columns was too broad to 1 p 6 and I could better use an other 0P6 inside margin.  So I changed the eight masters accordingly.  However, the initial margin aligns always see her on my pages, which suggests that I did the wrong path by clicking on layout > margins and columns and change the values in the menu.

  Is there a better way to make a global change of documents?

  1. when I see my pages in presentation mode margins low look too wide at 4 p 0.  In addition, my column 41p length 0 leaves too much space after the last line of the type.  I would like to increase the length of column just enough to accept another line before I add more chapters.

  2. my manuscript was typed in Open Office Writer that was then saved as RTF files before you import the chapters into identification documents.  Each paragraph begins with a dash, using the Tab key.  I figured when my paragraph style is applied to them after placement, the dashes will be replaced by the 2P0 asked in style.  I was wrong, they remained as in the original text.  This means I have to manually correct the first letter of each paragraph in my book.  What I'm missing here?

  For 1. Re apply the master on the pages, which should work.

  For 2. did you use the ALT key when you apply the paragraph style? If this is not the case, try this, but make sure that all bold, italic characters have a tank that are applied to their style.

• Change list font size of point in the Tree control

  With the help of Labwindows/CVI 2013

  Is there a way to change the font size for the list items in a tree control?

  Thank you

  John W.

  jwinterb wrote:

  Thanks for the reply.

  This seems only to change the label of the control.

  Yes...

  I don't think that the boxes can be designed in a way

• Hi can someone help me... I try to open my photos of microscope and all of them are just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is

  Hi can someone help me... I try to open my microscope fluorescnece images and they are all just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is gray and the merged image color space is RGB)

  Try to update your video card driver to exclude

  Then reset your preferences - with Photoshop CC you can do it in the preferences. Earlier versions require that you press the modifier keys that you launch Photoshop. Ctrl alt shift on Windows or cmd opt shift on Mac.

• Not enough space in Runtime area. Data not available SMBios. Inaccessible BIOS

  Hello, I was trying a restore or Windows 7 install on a p6510y for a friend. Tried going into the bios to select which device to boot from.

  I hit F10, it says enter the bios or enter the configuration..., then it goes to a black screen with a blue bar at the top. The blue bar is bright blue in the middle and it fades to the edge of the screen. It is not animated. I see no text or the cursor blinking either.

  If I do not go into the BIOS, I get the message "not enough space in Runtime area. SMBios data will be unavailable"and if I hit F2 to continue, windows starts normally.

  I stripped the system down to a single stick of RAM, tried a different PSU, graphics card, vga cable, etc.. I removed the cmos battery and flies over the rider for a solid 30 mins. I can not even access the bios.

  It's a machine extremely strongly virused, I was able to install Windows 7 via disk external drive bootable. The recovery partition is still intact, although it seems empty, still too much space.

  I ran sp49851.exe in windows 7 on the machine, the installation has been apparently successfully, but the BIOS always behaves in the same way.

  I am at a loss, have spent many hours in checking these forums of discussion, does not. Is it possible for me to prepare a bootable USB key and manually install the bios? I extracted the contents of the exe to a folder but I don't know what to do next. The computer has a floppy drive port. For any help or suggestion would be greatly appreciated. Thank you in advance!

  I was able successfully to Flash the BIOS manually, and it behaves as it should. Here's what I did:

  I extracted the contents of my bios file (sp49851.exe), using a program called Universal Extractor.

  I renamed the file alo6.09 to bios.rom (this was the only file required)

  I followed this guide:

  http://www.BIOS-mods.com/BIOS-update/

  Make SURE you get the HP USB Disk Format Tool, they provide a link.

  Make SURE you get the BACK image they provide a link for.

  I used AFUDOS for my AMI BIOS, from which the above ROM file extension. (they provide a link to AFUDOS)

  I used the command line afudos bios.rom/p/b/n/c/e/k/q/reboot (EXACTLY) how they said.

  Went straight into the BIOS, was able to make changes. System seems to work fine. It is very important that you read all of this guide and be absolutely sure that you have the good BIOS before updating. Thanks for the help Dave!

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• Adding space with bigger hard drives with 3WARE 9650SE RAID

  My original installation of Windows 7 is on a RAID 10 set up using 4 640 GB drives on a 3Ware 9650SE RAID card.  I replaced the drives one at a time with 1 TB drives, leaving reconstruction table each time before adding another.   Now that all 4 are in place, I would have a little less than 2 TB of space, but it does not appear.  Win7 is installed on a 200 GB partition, with the rest of the disk space showing that GB 972 yet (that I use for file storage).   Any thoughts on how to extend this option to use all the available space under the name more storage RAID 2?  I does not appear under management of the reader and does not help the 3DM 2 with resizing tool.  This has worked well for the RAID migration when on the SATAs motherboard, but it's another controller.   I would prefer not to have to reload Windows to use the extra space.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Hope this information helps.

• Could you change default directory where are stored the Essbase cubes?

  Hello everyone:
  
  I wonder if it is possible to change the default directory (+ / app / < apps > / < cube > +) where are stored the Essbase applications and cubes. Really, I have two questions:
  
  (1) is it possible to specify a new path where are stored the cubes?
  (2) could be using multiple paths at the same time? I mean, using the default route and an alternative route.
  
  This could be a good way to quickly generate space using, for example, external hard drives, couldn't?
  
  Thank you
  
  Concerning
  
  Javier

  I know of no limitation. You don't know where you just point do has enough disk space.

  Updated based on feedback from Glenn: must ensure that backup procedures Essbase are scripted to choose among different locations.

  Published by: amitgupta on March 2, 2011 10:25

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• Re: Satellite U500 begins with the "not enough space in runtime area» message

  I have this message at the start of my laptop U500-17: not enough space in runtime area. And after that ask me to press F1 to continue, but nothing happen, and start the windows does not work. I'm trying to get into the Bios, but I have some error and nothing happen. What should I do?

  In my opinion, you need to contact the nearest Toshiba service provider and ask for help. I'm afraid that your BIOS is troublemaker and they should Flash the BIOS of Mr. Unfortunately, you can not do this alone.
  For owners of Toshiba laptop offer updates of BIOS Win only. With other words, it can be started as a small application for Windows operating system running.

• Question: How can I change disk space for partitioned disks?

  I'm having a problem using top too much disk space on my (vista) C drive on my satellite L500, now that I've filled with iTunes music files. I want to use a part of the E drive to 'Add' on the C drive space. Is this possible?

  Also, could I just use the E-drive to add anyway, if I told iTunes to look for a few songs and C E for others? E has special properties like the recovery partition that can complicate things?

  Thanks if anyone can help!

  Paul

  Hello

  1 delete all the files and unnecessary programs from the disk: C to the freed space.
  2. move all the movies, photos, music on the disk E;
  3. If you use the Download Manager to download files, you can change the path where to save the downloaded files in your local case: E

  You can change the size of the partition in administrative tools in Control Panel. However, I prefer to use a partition manager paragon to resize partitions on my computers. Before add/create partitions, make sure that you have made a recovery disk.

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• Volume on the taskbar was hidden without changing the setting.__Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Missing notification icons:
  3 ways to recover...
  (1.) the easy way, if you're lucky:
  Right click on the task bar > click Properties > at the top, click on Notification area > can you put a check mark on the network? If so, you're done.

  If it is unclickable.
  2.) use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
  Depending on the version of Vista, you have, use the method two or three.
  One when you're done, return to #1 above and click on the box.

  3.) do a restore ysytem. Choose the date at which the icon was present under your restore point.
  Here is the tutorial:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• Are you limited the number of subfolders that can be added to a current folder within the document library?

  Original title: new folders

  Are you limited the number of subfolders that can be added to a current folder within the document library? I tried to add folders using the new folder tab and it will create not one. I hope I make this clear enough question. I'm not computer savy.  Thanks for your help.

  If you cannot create a new folder anywhere, this could apply.
   
   
  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

   

• How can I change the background of the "space needle image"? (not the bureau but the 1st screen)

  How can I change the background of the "space needle image"? (not the bureau but the 1st screen)

  Hello helpmezune,

  Move your cursor to the bottom right of your screen, as if you were about to shut down your PC. Charms bar appears. Click the settings (gear) icon. In the settings window, click on the option change PC settings at the bottom of the window. You can change the image of the needle space of the screen option customize in the settings window of change of PC.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com