Similar Questions

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• change the front panel

  How can we change to frontpanel in labview?

  I wrote a program where the appearance of the façade must be different.

  How do you make different frontpanels in the face?

  What about Michael

  I still don't get that you have to go with two screws separated, or you could make your project with a single main VI. If so, here is a small example with TAB controls:

• Error when changing the language of the front panel in Japanese

  Hello world...

  I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

  "Error analysis during the import of channels
  to test Main.vi
  of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
  "Saturday, November 28, 2015 11:09:14.

  (See the attached screenshot of error)

  So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

  I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

  I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

  Thank you...

  racahmd wrote:

  My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

  Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• changing design of front panel

  Hello

  I have designing my front panel now I want changed soming like this image format, but I am not able to design new modified.but I could do.

  

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• How to change the runtime of height and width of the front panel

  How to change the front height and width during execution. Basically, I want to decide height or width according to some parameters that I'm in the moment of execution.

  

  Ed johnsold was first

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• OR scope Soft Front Panel fails to load

  Hello

  I use the scope Soft Front Panel OR with my USB NI 5132 for some time successfully. However, recently it has stopped working completely - seems to load a bit then fails before you even open the screen. The same thing happens in MAX I did all the updates critical, uninstalled then reinstalled NI Scope, uninstalled Labview (the only thing I had changed after the last time, I know that it worked successfully) and checked the nitaglv.dll library was in the right place according to this post: http://digital.ni.com/public.nsf/allkb/63739991438EC593862579C6007301EC

  So far nothing's worked. I NI SCOPE 4.0 and NI-VISA 5.3.0 installed, and the computer could see successfully the digitizer USB 5132 Max after the relocation OR scope, well that the flexible façade does not always load and making the Panel test Max also does not.

  I have attached a picture of the screen to load before it disappears so that could provide clues.

  Suggestions?

  
  

• OR DC Soft Front Panel, minorbug, small bug with the PXI-4110

  Hello

  The NI DC Soft Front Panel V14.0, with the PXI-4110, scrolling to negative tension, works as expected to-10V, but then returns to 0. If we change from - 1V procedure, it goes...-8-9,-10, -1, -2... instead of-8-9,-10, -11, -12...

  Everything about her, a simple thing that I miss is a switch for all three voltages.

  (Also, IMO, it would be logical for negative tensions with the arrow pointing down, not more).

  My 2 c

  Hello Janaf,

  I completely agree with two of your statements, I tabled a report of corrective measures that you can monitor in the next versions of DCPower to see if this is fixed with the FPS. CAR number: 512257

  I've added notes that only manual insertion of numbers - less than 10 works and that it was not logical to use arrow increment or upward arrow to reduce the output voltage.

• Front panel locked, but not due to the structure of the event

  Hi it LV community.

  I did a staemachine program that executes an oscilloscope (screenshot of a provided below... the State of the problem). I ran my program yesterday and it worked very well. Then, like a model, a dialog box opens and I just clicked on it in a hurry. now my front hangs as soon as I move the above-mentioned State "the Oscilloscope settings.

  As indicated, I have go a repeat loop that collects successive impulses of my oscilloscope and displays on the front panel (it works fine). In parallel, I have a structure of the event that makes the tail for the real-time feedback of changes to parameters that I placed on the façade (exodus of state change).

  Here's the problem: as soon as I State 'Oscilloscope Settings' using a Boolean button on the front panel for get me there, the front hangs... No event triggered by this point, and even if it did, I already deselected the "Lock panel until the end of the matter for this event" checkbox in the case where the structure menu.

  So WHY is my front lock now? Thoughts anyone?

  Read the detailed help for event structures.

  He urged that a single event structure serve in a VI. There are moments where more can be used effectively, but caution and a thorough understanding of the structure are needed.

  The problem is that you have several structures of the event in the various cases of the state machine and they are set to respond to the same events.

  When the button Set Oscilloscope, the structures of the event in the purchase Menu and home screen States receive the event. The two lock the screen, but only one of these cases may work. It can transfer control to the State of the Oscilloscope settings, but the other event responding to this same event structure maintains the locked Panel.

  The solution is not not to release any of the event. The default value is usually the best setting. The best solution is to spend on an architecture of producer/consumer (events). Who uses two parallel loops. The producer has the one and the only structure of the event and passes orders to consumer loop through a queue.

  Probalby want as the mechanical action on the buttons to lock when you press. Put kiosks inside the respective case of event changed value and local variables becomes unnecessary.

  Lynn

• How to make non-visible control on the Front Panel appear at Design time?

  I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

  How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

  Thank you.

  It is documented in the help of LabVIEW.

  Hidden front panel display

  
  

  Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

  1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
  
  
  2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
  
  

  You can also use the Visible property to display the controls and indicators by program.

  You can also view all hidden front panel controls and indicators.

  Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

• Security of 2014 LabView front panel

  Hello.

  I am looking for web and this forum without success. Where is the Front Panel security in labview 2014. The Web for LabView 2011. Tools--> Security--> security on the front panel.

  I want to disable change a variable for some users. I create user... but do not have this option to FrontPanelSecurity.

  Can you help me... where can I find this Panel on labview 2014?

  The link you posted is for SDC. You can buy this and he license for LabVIEW, because it's an add-on.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209851

• What is the pinout of connectors on front panel for my p7-1154 Pavilion?

  Hi, I would like to know this as the pinout of the connector on the front panel on Pavilion p7-1154. I would like to know it is that I'm moving my system in another case with more space, better cooling ability and space for managing cables. I strongly modified this computer.

  I intend to put my system in a Fractal Design Mini ARC. I need to know if the front panel pinout is the same or if I need to make some changes. So, the HP Pavilion p7-1154 pinout are compatible with a standard spare case? Is there a schematic pinout for arrangement of the motherboard connector, this façade?

  My computer model number is: p7-1154

  My computer product number is: QP773AA #ABA

  The motherboard is a HP Hibiscus AAHD3 HB made by Pegatron

  Here are the specs.

  * Card mother HP AAHD3 - HB (Hibiscus)

  The BIOS of the motherboard doesn't support overclocking or Dual AMD graphics card

  * AMD 3850 APU (stock 2.9 GHz OC'd to 3.6 GHz using AMD OverDrive)

  * GPU HD Radeon 6770

  * Block modular POWER of Silverstone 500w 80Plus Bronze

  * 16 GB of RAM DDR3 Corsair 1600

  * 2 x Crucial M4 265 GB SSDS in band (RAID 0)

  * 1 WD Velociraptor 600 GB 10 000 rpm HARD drive

  Thanks for any help on this matter,

  Mike

  Mike,

  Please see the diagram below for your card mother pinout;

  

  Please send Bravo