WANT 411c: MFP ENVY 411c lights on the front panel

Similar Questions

• Sizing of the 50 orders/lights on the front panel to look like

  Hello

  I have 50 rectangular bollean indicators on the front panel. For some reason, the sizes of a few indicators are slightly different from the others. If I resize with the mouse it oversizes it. Can't think of an intuitive method to achieve this.

  All the ideas!

  Kind regards

  Austin

  Resize objects-> Minimum Height and Width.  or is it Minimum Width and Height, I forgot...

• Creating a point of light on the front panel

  Hi, I have a VI that controls a series of 3 way valves that snap into the particular moment of entry by the controller.

  I created an LED Panel on the face before showing what valves are or not at this point in time (attached .pdf).

  I was wondering if there was a way to draw in the pipes that would be lit up like the LEDs indicating the point at this moment in time, similar to the illustration in the attached PDF.

  Boolean pipes are integrated, but not on the pallet.

  Right-click to add or remove segments.

• The front panel indicator background color manually

  Hi I'm trying to color of the lights on the front panel depending on whether a test was successful or not. I created a Subvi to do the job, but I can't choose the right to the property to be set depending on what type of indicator is in color (ie. digital or string) then I used a case statement and try to detect what type of reference is passed in so I can set the right to property. I used a number of existing posts about it to this day.

  I seem to be unable to determine the type of reference correctly, I get errors about not being able to cast to the specified type, trying a color string indicator.

  I tried to add a screencapture but the system hung while I attached the VI, any ideas would be appreciated.

  Thank you

  When you compare references, the result tells you whether or not they refer to the same object, it does not tell you if they are of the same type.

  See VI changed to a technique to use.

• OfficeJet 6500 has 710n all LEDs on the front panel are flashing and nothing works. Any suggestions?

  As indicated in the subject line, all of the lights on the front panel are flashing and nothing works.  Will not communicate via cable or wireless. Green light is visible on the power supply. Suggestions?

  It seems that the printer needs to be reset.

  Cut the power to the printer for a minute. Reconnect the power to the printer and turn it on.

  Does have an effect?

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• How to disable together them on the front panel lights

  I have a VI that the front panel is shown below where an indicator of the chain is having a problem. The witness here shows the value "Please save the value of Temp Air [C]".

  Problem

  When the indicator is clicked on in the front panel the text box becomes 'editable' in appearance (only) and I did not want this

  Question

  How to eliminate the behavior stated below in the second picture, when the indicator also displays editable? How can I simply leave the system in a State of photography ?

  -Normal front photo

  

  Photo of Two - front with click on channel indicator

  

  Justin,

  Try to turn off the indicator. Node property or right click Advanced-> checked-> disabled state.

  Steve

• Want 5530: want to scan from the front panel of the printer computer

  Hello

  I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.

  On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...

  The PC is turned on, and the connected user.

  Printer is connected directly to the PC via USB cable.

  PC operating system is Windows 64-bit 10.

  Printer is 5530 want all-in-one.

  HP Print and Scan Doctor no problem.

  I tried with a disabled firewall.

  I uninstalled and reinstalled several times (using a new download of HP).

  When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).

  Test page will print from PC.

  Another PC (running Windows 8.1, connected via a network) seems to work.

  Any suggestions?

  Hello

  Thank you for using the HP Forums.  You can try this:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer

  Try this program to uninstall Microsoft

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  If you are installing via a USB connection, connect the USB cable only when prompted by the software.

  Let us know if it works!

• Conflict of flow of data on the front panel

  Hello

  My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi.

  When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of data to record and trace. Then, you might want to change the units, turn off all the buttons light and ok to select what data you want to save. Then click on RUN.

  The problem is; supposedly all the buttons are on by default, if you disable certain economies or tracing buttons to choose not to save, and then click RUN, after that all the buttons are again even if you have turned off before the race. They must stay off, if you have selected to save. The condition of main data flow is always the same be before running (only light buttons and ok).

  Do you have ideas of how to solve this problem?

  Thanks in advance

  You have what is called a race condition that usually slips in programs that use local variables.  If you look at your first while loop to read in the current value of the 'steam data hand' control and store in a shift register.  After the structure of the event outputs you write this offset value to register in the control and in the process of replacement of the changes that the user can do.

  A quick and dirty solution would be to manage the main event to change the value for 'Stream' in the structure of your event to update the shift register whenever the user changes the values in the control.

  A better solution would be to get rid of the shift registers and move local variables in the structure of the event.  As long as the option "lock the front until the end of the event" (I'm not sure of the exact wording and I work in the LabVIEW Base at the moment so I can't check) is selected it will ensure that you do not work in a race condition (you know the value cannot change inbetween you value reading, and you update the control).

  

  Even better would be to avoid local variables wherever possible.  This is general advice only and not not something that I can do much more tangible without knowing the details of how you want your application to behave.

  Hope this helps,

  Simon

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• How to scroll through the front panel when running

  Hello

  I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

  -Thanks in advance

  Hi, Mary,

  Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

  I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

  For example, "quick and dirty" implemented:

  

  Andrey.

• Export the graph on the front panel to the Clipboard

  Hello

  I want to export chart (image not simplified, but exactly as in the front panel) to the Clipboard. Then, I'll paste the contents of the Clipboard to the MS Word document.

  How to export the chart image to the Clipboard?

  Thank oyu.

  If you're using Windows, you can also use the library in the attachment from the message.

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• How can I remove items in a ListBox in the front panel editor?

  In LabVIEW 2010 Editor, I placed a ListBox control and then added 3 lines within the list box. Now, I want to delete one of these entries.

  I can remove the text, but I was not able to find a way to remove one of the lines.

  Delete all text does not remove the line?

  How to remove a line in a ListBox control in the front panel at Design time editor?

  Select the line and right click and select 'delete line '.

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.