coubu. SCR

Similar Questions

• Thyristor SCR test circuit

  Hello

  Attached a simple test for a thyristor (SCR) circuit.

  Normally, this circuit should work for a 106D TIC, but it doesn't. (Even tried with 'real' components. Light starts to burn without pressing the switch 2. The lamp, we used was a 230V/10W halogen bulb).

  I replaced the TIC106D with a BT150-500R in Multisim, but same result/problem.

  Could someone tell me what is wrong and what to do to do things?

  Kind regards

  Daniel

  Hello Daniel,.

  It is indeed correct that the warning lamp burning if you open J1 and J2 closed to leave.

  The reason why I can't get this, was because you use the same shortcut keyboard (space) for two switches.

  In general, this is done when both switches are controlled by the same entries.

  I see that there are several changes in the schema. (eg. placement of the thyristor also changed)

  The lamp of 10W or 5W (10W, said schema 5W said forum post)?

  If you want to have the switch J1 to actually turn off the lamp when you turn off the power, then there is something you missed.

  No matter what source of power (no matter if it can be disabled or not) on a schema must always have a discharge capacity.

  This discharge capacity should provide a path of the soruce to the ground.

  If you do not include this, then the source of voltage (according to diagram) is not properly off.

  As an attachment, there is an example of how you could do that.

  In practice this might not always necessary, but it is always a good practice with custom designs.

  In the simulation, you should always check that it has a way of discharge when you encounter these issues.

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• DIAC, Triac and SCR does not properly in Multisim 10.0

  Not to get the real answer or are having a problem to activate the Diac, Triac NSB and the SCR.

  And how do I get the symbol of CBS for Multisim 10.0?

  Hello

  Can you put the file created circuit, maybe we can find the problem, if we look at your circuit.

  If you want to create the symbol of CBS, put a SCR on the work area, double click it and click Edit component in db > symbol > Edit, you should be in the symbol editor and here you can draw anything you want.  Once you completed the drawing of the symbol select file > exit to get to the symbol Editor.  Select the tab general, model and fingerprint, make the necessary changes to this item and then click the OK button to save this part of your database.

  For a tutorial of creation of component complete you can take a look at this link:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3173

• Runtime error! Program: C:\windows\LIVING-1. SCR

  ASK FOR HELP WITH THE EXECUTION ERROR

  Recently, I received an error message on a frequent basis.  It's: Runtime Error!  Program: C:\windows\LIVING-1. SCR this application has requested the execution to terminate in an unusual way.  The section on States of error message "Microsoft Visual C++ Runtime Library" Cany anyone help me with this problem?

  What version of Windows are you using?

  What is your current screen saver on?

  Is it one that you have installed?

  You can try to change the screen standby and if necessary, uninstall it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-saver

• How to make available public folders after a SCR failover

  Hello

  My company has an infrastructure of Exchange 2007 SP2.

  We have 2 servers for mailboxes in CCR cluster that also hosts the public folders.

  We have a server SCR where replicate us all databases for site resilience.

  Database of public records is also replicated with SCR replication on the server VCC (what is sense? is supported?).

  I read the database portability TechNet article that addresses how failover to the server of the VCC.

  But the document does not how to failover of the Public folder database on the server of the VCC.

  I think I read that if PF is configured as CCR cluster I can't use native PF replication to replicate to another server.
   
  What is the right way to put at the disposal of users in the case of a failover of server SCR PF?

  Thank you

  Alex

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It suits better TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

• I want to what Outlook Express on my desk (shortcut), but I get an error message \SCR\Integration Toolholder.CPP 21. My computer freezes then.

  As explained in the title; I restored my computer after you delete the files that I needed later. I tried to put Outlook Express on my desktop and received an error message \SCR\Integration Toolholder.Cpp 21. I couldn't remove this message and my computer froze. Is there a way out if you please.

  Right click on the desktop | New | Shortcut. Navigate to "c:\program files\outlook express\msimn.exe". Click next | Click Finish.  It will be a new shortcut on the desktop.

• ""(Print Screen) print Scr key does not work is not in Windows XP Pro - (no LOCK "F") "."

  I have Windows XP - Pro.  The "Print Scr" button does not work and niether is the combination of keys 'Alt + P'.  My keyboard is not an "F LOCK" / key "F Lock feature" because it has a "Num Lock" key  There's no other keys on my key Board that suggest even a '___Lock' of any kind.  If not, how can I get this feature.  Oh... and one more thing, Microsoft/people sending responses to others, here, to "Social responses" can you try to be a little more specific with what you're talking about?  As your knowledge is greatly appreciated by many, many of us are unfamilliar with computers and have NO idea what you're referring to.  When Microsoft did not find something or is just lazy to do so, he advises people to "ask the administrator of the computer.  I'm the "computer administrator", but I'm inexperienced! How does it work?  Thank you all.

  On Saturday, August 14, 2010 12:57:22 + 0000, Firstname, Lastname2 wrote:

  I have Windows XP - Pro.  The "Print Scr" button does not work

  In the days of DOS, the print screen button to print the screen. But
  in all versions of Windows, it works differently and the name of
  the key is now an anachronism. The key is not to print the screen.
  PrtScrn captures the entire screen and Alt-PrtScrn captures activate
  window.

  Either a capture of the image in the Windows Clipboard. Once it is in
  the Clipboard, you can paste (Ctrl + V) into any application that
  supports graphics (Windows Paint, other graphics software, even your)
  favorite text processing). You can change or add to the image you
  like, then print it out.

  This ability to manipulate the image in a program before printing
  is an improvement on the original method of printing the whole back.
  But if you like that old return facility, there are several
  freeware/shareware programs from third parties which can do, such as
  PrintKey2000 to
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm

  Ken Blake

• The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly

  Original title: problem with the shortcut "xuiexi.scr".

  When I try to open my files I get a notice that says: PROBLEM WITH SHORTCUT.  The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.  You really want to remove this shortcut?  YES / NO

  What can I do to recover these files.
  Thanks in advance for any help.
  NW

  Hello

  (1) remember you to make changes to the computer before the show?

  (2) is that limit this issue when opening specific programs?

  You can perform the following methods.

  Method 1: I suggest you to run the Microsoft Fixit article.

  Fix broken desktop shortcuts and common system maintenance tasks: http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   
  Method 2: Run Virus Scan

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:
  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  WARNING:
  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
   
  It will be useful.

• Problems with picture Screensaver.scr and MSCVR100.dll

  I am running Windows Vista Home Premium on a 32-bit system on an HP Compaq PC.

  Following automatic updates from Microsoft and ATI Radeon, I get an error message when my PC is trying to activate the screen saver.  The screen saver is set up through my library of images and had worked perfectly for four years before the recent updates.  The error message at the start says:

  PhotoScreensaver.scr impossible to locate the component - "this application has failed to start because MSCV100.dll was not found.  Reinstalling the application may fix this problem. »

  Perhaps foolishly, I then bought what I thought, it was a problem of DLL - files.com, a trade name of Cleverbridge.  He said it had corrected flaws 1 200 on my PC (!), but it has not cured THE fault and the following error message:

  Problems with Photo Screensaver.scr - Bad Image: "MSCVR100.dll is not designed to run on Windows or it contains an error.

  I uninstalled the stuff of DLL - files.com and I searched for a solution on Microsoft Answers.  Depending on experience and advice previous users, I uninstalled the previous Visual C++ Redistributable update packages and the ATI update and installed the redistributable Visual C++ 2010.  No improvement.

  Then I tried to restore my PC to a date before the problems, but the restore function did not work and reported that she had failed for undisclosed reasons.  This has happened several times, no matter what point restoration that I use.

  I'm not particularly computer literate, so would like some simple tips on how to cure this.

  Thank you

  Hello

  I suggest you to install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download files according to your operating system version. I suggest you to install all the versions as they may be needed for different programs. Check in programs and features, is what shows you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  I hope this helps.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• SCR-26 broken watertight sealing cover!

  I know this isn't a very popular case, but I love the additional display features that the SCR-26 case overlooks Android 4.4 (I wouldn't touch slow 5.x, bloaty with a bargepole), so I stuck with it despite the way it attaches to the phone with the glue and the stupid pop back home.

  However, he did some damage when I took my Z3 Compact out of her send off for headphone jack repair - when I removed the phone from the case, the glue was so strong, that he pulled the rear glass of his seal cover!

  Everyone has hit this problem? And someone knows if Sony repair are likely to do stories about the faulty rear seal?

  Phone came back repaired yesterday with no complaints. He had a new ribbon cable and a new case (!), so the phone looks like and acts like new

  The process of repairing the fault can't really - it was fast and everything works perfectly. Would have been nice to see a "repair" status when I followed the phone, but I'm a very happy Bunny indeed.

• WLXPGSS. Locking the SCR

  Hello

  In Windows Vista, in the office properties, personalization, screensaver, I chose Windows Live Photo Gallery.  After a while of screen saver is activateed, the screen saver locks and I had to use Ctrl + Alt + Delete, who will command the windows logon.  Once connected, I get the following message:

  "Windows Live Photo Gallery has stopped working"

  Windows will try to solve

  close the program

  debug the program.

  I tried all the options, but it was not rectified.

  When the user has clicked tab more details, the following message was shown:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: WLXPGSS. SCR

  Application version: 15.4.3538.513

  Application timestamp: 4dcdb210

  Fault Module name: StackHash_ab05

  Fault Module Version: 6.0.6002.18327

  Timestamp of Module error: 4cb73436

  Exception code: c0000374

  Exception offset: 000b06fc

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  Additional information 1: ab05

  More information 2: 1a62be8ef4e7639c0543118c3afdb6a0

  3 more information: 04ad

  Additional information 4: 892b49015df298d739dfcc8dac5858a8

  Kindly tell me how this problem can be solved

  Just a suggestion... the selection of the source to the screen for your slide show
  Saver... try to select your image folder instead of Live Photo Gallery.

• The files on the hard drives are considered as shortcuts, or appears as .scr files after a system restore to manufacturer settings

  Original title: I did a restore of the system for constructor parameters and now all of my hard drives do not work on my computer windows vista.

  The files on the hard drives are considered as shortcuts, or presents itself as .scr files and says a file is missing.

  Hello

  1. what happens when you try to access these files?

  2. do you get an error message?

  3. have you used earlier these files/folders?

  Step 1:

  You can check out the following link and try the steps suggested by Jamesarntz on July 21, 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/files-on-external-drive-have-changed-to-shortcuts/695db4cc-645f-4BD1-85c7-41671457fe11

  If the problem persists, try the following steps:

  Step 2:

  Download and run the tool of diagnosis from the link below.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Step 3:

  You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  For more information, see the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this information is useful.

• Login error. SCR

  Im running Vista family premium, it starts and after a black screen for about 6 minutes finally the login screen will appear. I see the icons for both the accounts of users, but when I click it, nothing happens that he does not enter a password. You can tell in the background under its weight stuff. I leave for a day.
  I started in safe mode with the same event, except that I get the logon.scr application failed to initialize properly, and then the screen goes black.

  I started on the Vista cd and ran a repair that told me that I have to disconnect any camera or music devics (everything is disconnected)
  I also restored to a problem of the same point-still very early
  I ran the same diagnosis-another problem-memory is ok.

  This can be caused by the failure of hardware or software (corruption, malware), and there is no way to know who's here. Since you've already tried system restart tool, test the hard drive to make sure it's good (test of the RAM is OK but it is doubtful that the RAM has your problem) and do a clean install/Vista Factory restore.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you need get the data first, you can do from outside Windows by one of the following methods:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!