""(Print Screen) print Scr key does not work is not in Windows XP Pro - (no LOCK "F") "."

Similar Questions

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• HP Envy 17 (new, out of box) Wireless Network does not (OS: Windows 7 Pro)

  Straight out of the box, my HP does not connect to my home wireless network. This, however, will work with cable AND wireless to my hot spot of verizon - but NOT the network wireless home (even if place in the same room).

  This is the most I ever paid for a lapop and by far the most trouble I've ever had.

  My husband I want to return this "piece of crap"... as I lost two full days on this so far.

  More information:

  • 64 bit OS
  • Intel i7-4700MQ 2.4 GHz
  • 16 GB of RAM
  • Network cards:
  • Device Bluetooth (personal area network)
  • (Heading RFCOMM Protocol TDI) Bluetooth device
  • Intel (r) Wireless - N 7260
  • MS Virtual WiFi Miniport (two of them)
  • Realtek PCIe GBE Family Controller

  Please advise!

  Everyone? Please?

  What is the average revolving around questions asked in this forum?

  I hope I have neer NEED to use this forum again because I never got a response.

  I figued the answer myself.

• Remote Desktop credentials does not-2 windows 8 pro machines

  Trying to office remote set-up for the first time in a few years. 2 win 8 pro with a lot about farting machines I can see the two machines on the network, I configured the write permissions and can access files and folders, I get the login prompt and even jumped through all the hoops here:
  Add a user account to a group

  I put not too windows firewall.

  When I try to login and get a safe area of windows saying my credentials did not work. He asks me to connect using my microsoft account. The account I have to connect on both computers with - so I know the password is correct. I try to use another account (the two accounts on both computers use the same user name and password), and it always rejects it.

  I tried to connect to my account online and get an error, and then the password was rejected, so I reset the password.  I tried logging in tp remote desktop using this password, but that does not work either.

  LogMeIn took like 5 minutes to Setup. I've been at this for hours

  Hello

  I suggest you send the request in the Technet forums to get help:

  Reference:

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  Thank you.

• Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Now, it's a boring, which several other users have reported under different threads. Because I couldn't find a post with quite similar symptoms, I made my own topic.

  I am running Windows 7 Professional 64 x on an old one (Intel Quad-Core, 4 GB RAM, 524 GB HDD - in case, for reasons unknown to me, someone needs to know it...) , DellXPS system. Not more than a few weeks ago my home button keyboard unresponsive on this system.

  I did a lot of troubleshooting, but these measures have been carried out:
  * Tested keyboard on the other system, touch ESC WORKS on the other system
  * Reinstalled keyboard and USB drivers on the XPS system, ESC key does NOT WORK on the XPS system
  * Connected to a never-before-used USB keyboard, ESC key does NOT WORK on the XPS system
  * Opened and cleaned the keyboard, tested, Escape key WORKS, Don't DO NOT WORK on the XPS system
  * Tested in various applications: Desktop (Esc will close the start menu), Photoshop, Vegas, Notepad, games full screen OpenGL,Escape key does NOT WORK on the XPS system
  * Google for possible solutions, none found...

  Note: Highlights show where the ESC key does not work. I am troubled by the XPS system.

  In case you missed it my list of troubleshooting steps, the ESC key works on another computer of Windows 7 system.

  I have to still garble my self through the registry in the hope that someone might have an idea of the steps to follow before I lose a day to see the things that I honestly know squat. Please help if you can; What could be the issue/common application that separates this key in the Windows world and how could I solve this problem?

  Thank you in advance!

  For reference,.
  No major changes have been made since the keyboard unresponsive with the exception of:
  Updates to FireFox (including modules Ad-Block Plus, NoScript, which have also been updated).
  Windows Update
  A 10.x MB World of Warcraft patch/update on a keyboard AFTER week unresponsive

  Already installed the patches StarCraft II and World of Warcraft, which none touched my keyboard to my knowledge. I finished almost all of StarCraft II and had no problems...

  I know it's a bit old, but I was living the question myself.  Thought I had found the problem and it was fixed but then it happened again.  Came to find out (by closing a program and test the ESC key) it's because Photoshop.

  With the help of Photoshop, which could match the case you mention.  Not only that but I did a search ('ESC' does not not Photoshop) and stumbled on some answers/solutions workaround for it.  One is to use SHIFT + ESC ESC does not work.

  Hope this helps someone.  I fell it using my original research ("Windows 7" BSE "ESC" keyboard does not) and know that others are likely to see.  If you have not already learn the cause, in the year + since your original message, then voila.

• Portege Z830 - X 11 - enter key does not work on the logon screen

  suddenly, the Enter key does not work in the scrreen of connection (win 7 64 bit, toshiba portege Z830 - X 11), which some do not login with password.

  The on-screen keyboard sends the "enter" or the other.
  When in safe mode, everything works as it should.

  I solved this problem by disabling the password for the account, but I don't feel well in this situation.

  Help, please...

  Have you tried an external USB keyboard?
  Do this!

  Not very well why the ENTER key does not work on the login page, but I guess its problem of keyboard.

• WiFi link for printer EPSON-750 does not work

  WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work

  Have you also tried to restart the router?

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Help with the Printer Spooler service does not work error

  How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.

  Thank you.

  Hi elvenlord21,

  See the article below which has some useful suggestions to fix the print spooler error.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  See also:

  Error message when you use the Add Printer Wizard: "Operation could not be completed.
  http://support.Microsoft.com/kb/314876

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Re: FN brightness key does not work on my Satellite L350

  Hello, I have a Toshiba Satellite L350 - 20 portable computer G, I went down to windows XP

  Screen, sound, WIFI all work great, but the Fn brightness key does not work, anyone know the solution to my problem

  Thank you

  You have installed the clean version of Windows XP Home edition?
  Have you installed all the drivers available, tools and utilities?

• My shift key does not work on my MacBook Pro

  My shift key does not work on my MacBook Pro. Can I use capital letters but only if I click on change and it's annoying. When I click on the passage icon shift comes at the top right of my screen to show its on but when I click on the lock button nothing happens as it used to glow green when I clicked it. Before someone says go to the system preferences and go to the modifier keys and restore them or make sure caps lock shift is on lock shift, I've tried that already, I looked it upward and found nothing similar. Help ASAP would be appreciated because it is really annoying

  Hello Gracepullan1,

  I understand that shift key of your MacBook Pro does not respond as before. Fortunately the steps below can help to restore the functionality of the SHIFT key on your Mac.

  1. In the Apple menu, choose System Preferences.
  2. On the view menu, choose the speech.
  3. Click on the text to Speech tab.
  4. If "Text Speak selected when you press the button" is enabled, the key or combination of keys set to read the text cannot be used for other purposes, or used for typing text - click on set the key and replace it with a less commonly used key combination (try using the modifier such as SHIFT keys, command) Option and control). Or disable the option "Read the selected text when the key is pressed".
  5. Click the accessibility pane or universal access in system preferences, and then click the keyboard tab.
  6. Make sure the slow keys is off. With slow keys on, you must press a key for a longer period of time so he can be recognized.
  7. In the accessibility pane or universal access, click the mouse and make sure mouse keys is turned off. With the active mouse buttons, you cannot use the numeric keypad to enter numbers - instead the keypad moves the pointer (cursor). (There is an option to activate the MouseKeys to five presses down option, you can disable this option to avoid accidentally activate it.) If the mouse keys is enabled and you are using a keyboard without the numeric keypad or Num Lock function, see Impossible to type while mouse keys is enabled in Mac OS X.
  8. If the function keys on the top row of the keyboard do not work as expected, see Mac OS x: how to change the behavior of the function keys.
  9. If the problem persists, use the keyboard Viewer to help isolate the problem:
     1. Click the component language & text (Mac OS X v10.6) or international (Mac OS X 10.5.8 or earlier) in system preferences.
     2. Click on the tab Input Sources (or tab Menu entry under Mac OS X 10.5.8 or earlier version).
     3. Click on the keyboard and the characters 'On' box Viewer checkbox to select (click on the viewer of keyboard "On" checkbox under Mac OS X 10.5.8 or earlier).
     4. In the entry menu (flag), choose Show Keyboard Viewer.

  
  

• If the keyboard is connected and detected by OS X, the keys you type will highlight in the keyboard Viewer window. Open TextEdit (or any text application) and try to type something using the keys that failed before to see if they highlight in the keyboard Viewer.
• Start up from the Mac OS X installation disc, choose Terminal from the utilities menu and test buttons that did not previously.  If the keys work while started from the install disc, the keyboard works correctly.  How to solve a problem of software allows to isolate the software problem that may be causing the keys to not answer.

One or more keys on the keyboard do not respond
https://support.Apple.com/en-us/HT203162

Sincerely

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• Recover Windows 7 family premium but license key does not work

  Hello

  My HD crashed on my laptop HP, so I got a new one and managed with the help of a friend to get Windows 7 Home premium installed again, but provided with my HP laptop product key does not work, how is it?

  Thanks for any help

  / Jan

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please use the support of HP recovery, you created when you first you computer Configuration. If you don't create this media, please contact the official support HP customer in your region / country, via the Portal Support HP's worldwide, to see if the HP recovery support is available for your computer.

  If you found "recovered" or the Windows product key from the old hard drive, it will not work. The key to the used factory also requires a SLP/SLIC 2.1 BIOS and an appropriate OEM SLP/SLIC certificate.

  Alternatively, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Basic by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the drivers from the HP support for your computer page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation