Could not complete install in eclipse

Similar Questions

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

  I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

  How much memory you allocate to Photoshop in the preferences?

  Terri

• I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can I have cs4 for r

  I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can get cs4 to read the raw file?

  Hi diggoman,

  Greetings.

  • Camera raw 9.1 is not compatible with 4 CS of PS.
  • This camera is too recent for your PS CS 4

  Your options if you want to open raw files-

  • Purchase PS CS 6
  • Or go to subscription with PS CC 2015, where you will also have access to the PS CS 6

  Concerning

  Rohit

• I want to edit my images raw on photoshop cs5.  But when I go to open the. CR2 file, it says: "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit

  I want to edit my images raw on photoshop cs5.  But when I go to open the. File CR2, it says:

  "Could not complete your request because the file appears to be a model of camera that is not taken in charge by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information.  ''

  When I go to the updates using photoshop I try to update photoshop and photoshop camera raw, but it then says

  "Updates cannot be applied to the error log file can help you identify the problem. Then try to update again. If problems persist, contact customer support for further assistance.

  8.7.1 (CS6) Photoshop Camera Raw there is an error in the installation of this update. Quit and try again later. Error code: U44M1I216 "

  I don't know how to get around this help please

  CR2 files of what Canon camera?

  Supported cameras is listed here

  Camera Raw plugin | Supported devices

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• my iphone 5s problem could not complete touch setup ID come back please and try again... I need to fix the problem

  my iphone 5s problem could not complete touch setup ID come back please and try again... I need solve the problem... Thank you

  Same question! Please help. I have installed 9.3.1 on iphone 5 s. error message"could not complete touch setup ID come back please and try again. »

• "Windows could not complete the installation", Y510P

  Hello

  Just got my new Y510P and realized it's impossible to start Windows.

  Initially it displays error "Windows cannot parse or process Unattend...» [... \unattend.xml] [oobeSystem] pass... »

  After reboot he start to display a different message - "Windows could not complete installation, restart the installation.

  The operating system is Windows 8.1.

  Looks like I'm not the only person having this problem. System recovery does not help, of course (as well as the graceful Lenovo tech support).

  I think that the problem caused by the incorrect unattend.xml file that fails to install any software because of this error and unnesessary blocking Windows to complete the installation.

  I see no other way rather than installing Windows from another source. I don't want to pay for another Windows license and instead return the Lenovo laptop, but perhaps there is another way?

  Problem solved.

  I contacted Lenovo support and they offered me to send recovery discs I received a few days later. I installed the cleaning system of records and have not experienced any problems since.

  I'm still not fully satisfied because I cannot reset the laptop to the factory settings without these discs, but I think I can live with that.

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• an installation support file could not be installed a catastrophic failure

  my laptop runs windows vista, a long time ago, I installed a game pc on this subject, I uninstalled later from the Windows UNINSTALL or CHANGE a PROGRAM but I noticed that an icon remained in the list of programs, but I do not put attention to it, a few days ago I tried to install the same game again , but when I click on the INSTALL option, AN INSTALLATION SUPPORT FILE COULD NOT BE INSTALLED CATASTROPHIC FAILURE message appears immediately, I tried to uninstall the icon that remained in the list of programs, but I can't I just get the same message... can anyone help me pleaseeeeeeeee

  Try the following two programs to remove it.
  If this fails, contact Support about problems with their software game maker:

  http://www.revouninstaller.com/

  Revo Uninstaller helps to uninstall software and remove unwanted programs installed on your computer even if you have problems uninstalling and can not uninstall it from Control Panel ' Windows Add / Remove Programs ".

  Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet!

  With its advanced and fast algorithm, Revo Uninstaller analyzes an application data before uninstall and scans after the uninstallation of an application. After that program's regular uninstaller runs, you can remove additional unnecessary files, folders, and registry keys that usually remain on your computer. Even if you have a broken installation, Revo Uninstaller scans for an application data on your hard disk and in the Windows registry and shows all the files, folders and registry keys so you can remove them.

  With its unique "Hunter", Revo Uninstaller offers you some simple, easy to use, but effective and powerful methods for uninstalling software. You can use it to manage your installed or running software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.CCleaner.com/

  CCleaner is a freeware system, privacy and cleaning tool optimization. It removes unused files from your system - allowing Windows to run faster and freeing up space on the hard drive. It also cleans traces of your activities online such as your Internet history. In addition, it contains a complete registry cleaner. But the best part is that it's fast (normally taking less than a second to run) and contains NO Spyware or Adware! :)

  See you soon.

  Mick Murphy - Microsoft partner

• Error - Windows needs to continue Setup could not be installed during the upgrade to Service Pack 2.

  Original title: computer locked up on upgrade to xp p2.

  I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer.  I tried safe mode, but it kicks me back to the same screen

  Hi jodyjones,

  You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.

  How to use the automatic recovery feature to recover your computer or your Tablet PC if the Windows XP Service Pack 2 Setup program is not completed successfully

  
  Reference: installation of the Service Pack 2 (SP2)

  Hope the helps of information.
  Please post back and we do know.

• Vista: Windows could not complete the installation. Reinstall Windows. Stops at CRCDISK. SYS in safemode, all the time.

  A hard drive the HP dv2915nr laptop was dead. Installed a new hard drive and use the HP recovery CD. installs for 4 hours and then stops: Windows could not complete installation. Please re - install Windows again. Each facility is 4 hours. Because another install and it took 4 hours and then it restarts and stop at the same error. Now, I'm administrator (locked) - turn off when I pop in the recovery CD. Message: Your account has been disabled. Please, see your system administrator. I tried Safe Mode and loading Windows files stops at crcdisk.sys all the time and then restarts and displays: Windows could not complete installation. Please install again. Can't go in the office. Only restarts with these messages. Asked HP cat (3) Tech people and they do not have the answer. Said, could be a compatibility issue with the software. I ordered this CD of recovery on their part and he got yesterday. Now, they send in the laptop. So tried advice here. Please notify.

  I found the answer. HP Tech Support Chat did not know the answer. When you run HP recovery CD, don't hit the restart WINDOWS button when it asks. The software will do it for you automatically. It will take a while (several hours 1-6 hours) to complete. You'll know it's done when WINDOWS ask you information of language, country and keyboard. In other words, don't touch anything once you start the restore CD program. Leave it alone and it will fix it for you. IGNORE the pop-up restart.

  I can't believe HP has not even tell me that and 3 chat sessions with them was a waste of time. Last HP person ask me to send in the RECOVERY CD and the laptop.

  No help from anyone on this issue. :(

  BUT I thought about it. :)

• "windows could not complete format."

  I have a Pioneer DVD - RW USB drive.  Recently I looked for "WAS UNABLE TO COMPLETE FORMAT WINDOWS" when you try to initialize a new dvd - rw disc.

  I have reads and writes formatted disks before.

  Any suggestions on how to fix?

  Hi ghbritton,

  ·         This happens with all new disks in DVD - RW you try?

  ·         If it works well before?

  I suggest that you connect the drive to another computer and look for the question.

  You can refer to this article and install the patch.

  Error message when you format a disk by using the system component of active files on a Windows Vista-based computer: "Windows could not complete the format".

• Windows could not complete the installation - Message in Vista 32

  Windows could not complete the installation. To install windows on this computer, run the Setup again.

  I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• "Could not open INSTALL. NEWSPAPER"when I try to uninstall Yahoo messenger and other programs of the control panel

  Original title: "Could not open INSTALL. JOURNAL ".

  We get this message when I try to uninstall Yahoo messenger and other programs of the control panel.

  Hi thomaskirchoff,

  
   

  (1) how long have you been faced with this problem?

  (2) what is the complete error message you receive?

  Method 1: You can see the steps in the Yahoo link below

  http://help.Yahoo.com/kb/index?locale=en_US&page=content&y=PROD_MSNG_MSNG10&ID=SLN649&impressions=true

  
   

  Method 2:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.