Could not find a compatible SRS Audio Device

Similar Questions

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• can't play games "could not find a compatible 3d device".

  When I try to play some of my games, I get the message "cannot find compatible 3d devic.

  Hello

  I would update both your graphics card drivers and your currently installing Direct X.

• HP Pavilion G6-1215ex: could not find "Wireless adapter" in my device manager.

  Hello.

  I recently formatted my HP Gseries laptop and reinstalled all the drivers. Towards the end of it, I couldn't find my adapter wireless listed in my device manager. I can connect to the internet via a connection fixed but the Wireless does not exist. When I try to install the wireless driver, the Setup program cannot detect the wireless network card.  I tried the following, which none has seemed to work:

  Turned on the wireless devices. Bluetooth works. Wi - Fi nope.

  Checked for possible compatibility problems drivers.

  There was something a little "unrecognized network controller" in the "other devices" category, which I assume is my wireless adapter. Therefore, I have included the hardware below id if this would be of any help. Please help me find the appropriate patches for my problem.

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Thank you in advance.

  Hello

  Please try:

  Broadcom Wireless LAN Driver for Microsoft Windows:

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

  Kind regards.

• "Windows could not find driver software for your device. Why that's coming up?

  I'm trying to connect my printer multi-funtion-9021d Savin. I use Windows Vista as my operating system. I don't have the disc that came with the printer and the manufacturing is not help. Please help ASAP!

  Hello

  I'm sorry, but the manufacturer of the printer written and provides the drivers for your printer not microsoft

  go to their website and search for your model of printer vista drivers

  http://www.Savin.com/downloads/default.aspx?HBN=drivers

  If there is no software driver compatible vista available of the manufaxcturer of the printer, you will need to upgrade to a printer compatible vista

• RM-892 | Nokia Lumia 925 "Windows could not find driver software for your device" Win7

  Anyone know how to get the Lumia 925 to install drivers on Win7 machine?
  Or is there a link with all the drivers out there that can be downloaded?

  

  Sorted!

  http://www.Nokia.com/us-en/support/FAQ/?action=singleTopic&topic=FA140430

• Could not find the SRS audio device error

  Since I installed Windows7 on my laptop, I got the error "Unable to find compatible SRS audio device" on start up. I checked the "Device Manager" and all audio devices seem to work normally. I have re-installed Windows7 and I still have the same problem. When I play music, I get static on my speakers. When I use a trial subscription to a SRS audio product for purchase, the problem goes away. I want to fix this problem without having to pay for one of the products of the SRS.

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

• Setup failed: Setup could not find a device supported to write the image of the system of

  Hi, I just downloaded VMWare ESXi 3.5 and I can't seem to install on my system. Error, it evokes, installation could not find a support designed to write the ESX 3.5i system image, what device should I see, I have a hard drive works perfectly installed what should I?

  all responses appreciated

  Kind regards

  Mykola

  Take a look at these.

  http://www.VM-help.com/ESX/esx3i/Hardware_support.php

  http://www.VM-help.com/ESX/esx3i/find_PCI_ID.php

  http://www.VM-help.com/ESX/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php

• SRS Audio Device

  I don't remember what I did but when I booted up my laptop it says could not find the SRS Audio device

  Click Start, type: Device Manager
  Expand Audio devices, if there is a device with an exclamation sign, right-click and click on Player update. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.