Could not find a reference guide in order for the Visual Studio plug-n

Similar Questions

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?

• Could not find 'Pre-upgrade of SLA program' and the executable XLAPREUPG 11i pending

  Hello

  I'm upgrading EBS 11i to R12. I have applied patch 5233248 ALS pre upgrade program, but we can't find "Pre-upgrade of SLA program" and the XLAPREUPG executable in my case 11i?

  Note MOS ' ALS pre-cautionary program at level is not enabled (Doc ID 427639.1) "speaks of" simultaneous program "pre-upgrade of SLA program '; How can I find and then activate this program? Can someone give me the navigation for this program and the executable file path or how to activate it?

  Thank you

  Mathias

  This means that there is no such thing as simultaneous program.

  The patch has been applied successfully? Please ask AD_BUGS to check.

  If you are looking for "SLA", you can find the program then?

  The Enable checkbox is next to the field name of the simultaneous program, but is not the issue now that we must first confirm if the program exists in your case or not.

  Thank you

  Hussein

• Could not find in my adobe cs6 order account full download

  I ordered a full version of illustrator cs6. I have the order reference number and the email telling me that the download is now available. But I can't find the order in my adobe account. Any ideas? Thanks for help.

  Hi liherzog,

  Please find the document below which should be helpful to find the download link of your Adobe account:

  Find a download link on Adobe.com

  If you still face the question in order to find the download link of your account so you can download your CS6 from the link below:

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  Then use the serial number to activate your product.

  Thank you.

  Shakur.

• Could not find entry menu to "leave mail on the server.

  I used this before - I have three computers and you want only one of them to pull the mail on the server.

  Firefox has no features of email, this question about Thunderbird?

  If it is, for the support of Thunderbird, you can ask in one of these forums:

  • http://forums.mozillazine.org/viewforum.php?f=39
  • http://getsatisfaction.com/mozilla_messaging

• WebWorks & ripple: package & sign: cannot sign the application - could not find signature keys

  Hello

  I am developing a prototype for my company using ripple and Webworks.

  If I package it without signing my BB returns an error "must sign this."

  If I try to sign, I get an error "cannot sign the application - could not find signature keys.

  Somewhere on the net, I realized that I am required to buy RIM signing keys, is this true?

  Is it possible to have temporary keys for testing purposes?

  Thank you

  Roberto.

  Signing keys are free and available here

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• I installed Windows 7 not genuine, I need to activate it, but I could not find the product key

  * Original title: product key

  I installed Windows 7 not genuine, I need to activate it, but I could not find the product key. Could someone guide me please.

  If you can't find the product key, you will need to buy a new one:

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• listener_scan1 could not find the name of service

  Hi all

  I installed 11203 on 2 node RAC cluster. I created 1 listener to scan. When I give lsnrctl status LISTENER_SCAN1, I get the below error

  AMT-01101: could not find the name of service LISTENER_SCAN1

  Please, give your suggestions and help on this issue.

  Thank you

  NR

  Hello

  Try configuring the tnsnames.ora in this format and let me know

  If you use load balancing, try

  TBESTDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node1_vip))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node2_vip))

  (LOAD_BALANCE = yes)

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TBESTDB)

  )

  )

  And you can add below if you want to connect to a specific instance

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac1-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac1)

  )

  )

  RAC2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac2-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac2)

  )

  )

  Note: Replace the SID, Servicename, hostname, port etc depending on your environment and also ensure that the tnsnames.ora should be in an appropriate format (for example: the opening and closing should be in the right order.) If you add an extra space further it will throw error..)

  Kind regards

  Pradeep. V

• tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)

  I'm getting the following on my database warning
  Is is a serious question
  Please suggest some solutions...
  
  
  D:\oracle\product\10.2.0\admin\orcl\bdump\orcl_lgwr_4972.TRC dump file
  Mon Jan 21 16:59:27 2013
  ORACLE V10.2.0.4.0 - Production of 64-bit vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Windows NT Version 6.0 Service Pack 1
  CPU: 16 - type 8664, 16 physical cores
  Process affinity: 0 x 0000000000000000
  Memory (success/Total): Ph: 61324 M / 65533 M, Ph + FCP: 176683 M / 193356 M
  Name of the instance: orcl
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 8
  
  Windows thread ID: 4972, image: ORACLE. EXE (LGWR)
  
  
  NAME OF THE SERVICE :() 16:59:27.654 2013-01-21
  SESSION ID: (880.1) 2013-01-21 16:59:27.654
  tkcrrsarc: (WARN) could not find the ARK of message (message: 0 x 1)
  tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0 x 1)
  Maximum record size redo generation = 156160 bytes
  Redo size maximum generation change vector = 150676 bytes
  tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)
  tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0x10)
  23:56:18.591 2013-01-21
  WARNING: Log write time 550 m, size 1 KB
  00:37:43.391 2013-01-22
  WARNING: Log write time 1180ms, size 2 KB
  09:42:03.185 2013-01-22
  WARNING: Log write time 550 m, size 2 KB

  Have a read of metalink 375229.1

  It says that this message is informational only, so it is safe to ignore.
  He also hit the value of log_archive_max_processes to more than 10 can solve the problem
  Finally, they say that it is a bug that is corrected in different versions. Then maybe an upgrade is in order?

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?