Could not find admintemplate.dwt error during the updating of model

Similar Questions

• Could not find an appropriate interface for the private interconnection range

  I'm going to install RAC 11.2.0.2 on two nodes REDHAT linux.
  
  I ran runcluvfy pre crsinst, he gave me warning as follows:
  Could not find an appropriate interface for the private interconnection range.
  
  I asked her to use a different subnet as public interconnection for interconnecting private as well as the name / etc/hosts also set private ip addresses. Private ip address is not defined in the DNS system.
  
  .runInstaller also not will pop up the Ethernet because private interconnection over choice of network.
  
  What to do to solve this problem?
  
  Thanks in advance.

  You can temporarily change the mask of 255.255.255.0 on eth3 and see if YES recognizes eth3?

• Error during the update of information in the form-more details Personla people

  Hi all
  IAM getting an error during the update of the information in the form of people, Personla other details FDF.
  
  Error such as:
  
  APP-BY - 289974:There has been a mistake of treating this individual's encountered error ' ORA - 20001:HZ_STNC_SQL_EXCEP:N, PROC.sync_Person, N, ERROR. ORA - 25153:Temporary Tablespace is empty, N, OOP, 1265890', which took place in the per_htrca_merge_tca_person to step10 procedure.
  Please contact your support represntative.
  
  
  Thank you-
  Sowmya

  Hello

  Please see Metalink belw Notes-

  ID 727573.1
  ID 395136.1
  [ID 278422.1
  ID 290228.1

  HTH
  Gerard

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• I get the dreaded 80080005 error during the update of windows.

  Here's what's in windowsupdate.log:

  2009-12-27 20:59:41:783 1068 1410 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2009-12-27 20:59:41:783 1068 1410 Misc = process: C:\Windows\system32\svchost.exe
  2009-12-27 20:59:41:783 1068 1410 Misc = Module: c:\windows\system32\wuaueng.dll
  2009-12-27 20:59:41:783 1068 1410 Service *.
  2009-12-27 20:59:41:783 1068 1410 Service * START * Service: Service startup
  2009-12-27 20:59:41:783 1068 1410 Service *.
  2009-12-27 20:59:41:814 1068 1410 Agent * WU version 7.4.7600.226 customer
  2009-12-27 20:59:41:814 1068 1410 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2009-12-27 20:59:41:814 1068 1410 Agent * access type: no proxy
  2009-12-27 20:59:41:845 1068 1410 Agent * network state: connected
  2009-12-27 20:59:44:232 1068 1410 DtaStor default service AU is {00000000-0000-0000-0000-000000000000}
  2009-12-27 20:59:44:279 1068 1410 DtaStor default service AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
  2009-12-27 20:59:44:279 1068 1410 Agent WARNING: cannot read the re-registration service id 0 x 80070002
  2009-12-27 20:59:44:279 1068 1410 Agent WARNING: entered service in the backup data store; cleaning of
  2009-12-27 21:00:29:472 1068 1410 report CWERReporter::Init succeeded
  2009-12-27 21:00:29:472 1068 1410 Agent * Agent: initialization of Windows Update Agent *.
  2009-12-27 21:00:29:488 1068 1410 Agent * Agent: initialization of the global parameters cache *.
  2009-12-27 21:00:29:488 1068 1410 Agent * WSUS server:
  2009-12-27 21:00:29:488 1068 1410 Agent * state WSUS server:
  2009-12-27 21:00:29:488 1068 1410 Agent * target group: (Unassigned Computers)
  2009-12-27 21:00:29:488 1068 1410 Agent * Windows Update access disabled: No.
  2009-12-27 21:00:29:488 1068 1410 DnldMgr Download manager restoring 0 downloads
  2009-12-27 21:00:29:488 1068 1410 in THE # to THE: initialization of automatic updates.
  2009-12-27 21:00:29:503 1068 1410 in THE # to THE disabled through the user preference
  2009-12-27 21:00:29:503 1068 1410 in THE # will interact with non-admins (Non-admins are high (user preference))
  2009-12-27 21:00:29:503 1068 1410 AU initialization featured updates
  2009-12-27 21:00:29:503 1068 1410 in THE Found set 0 cached updates featured
  2009-12-27 21:00:29:503 1068 1410 only to THE delayed finish to initialize
  2009-12-27 21:00:30:299 1068 1410 report * report: initialization of static data to report *.
  2009-12-27 21:00:30:299 1068 1410 report * OS Version = 6.0.6002.2.0.66304
  2009-12-27 21:00:30:299 1068 1410 report * OS Product Type = 0x00000002
  2009-12-27 21:00:30:455 1068 1410 report * computer mark = Acer
  2009-12-27 21:00:30:455 1068 1410 report * computer model = Aspire 5315
  2009-12-27 21:00:30:471 1068 1410 report * Bios revision = V1.17
  2009-12-27 21:00:30:471 1068 1410 report * the Bios name = default system BIOS
  2009-12-27 21:00:30:471 1068 1410 report * Bios Version Date = 2007-09-14 T 00: 00:00
  2009-12-27 21:00:30:471 1068 1410 report * locale 1033 = ID
  2009-12-27 21:00:35:509 1068 a00 CWERReporter finish event management report. (00000000)
  2009-12-27 21:01:39:454 1068 CEF detection to trigger to THE via API DetectNow
  2009-12-27 21:01:39:454 1068 CEF to online (interactive) detection triggering
  2009-12-27 21:01:39:469 1068 1410 AU #.
  2009-12-27 21:01:39:469 1068 1410 AU # START # to THE: research updates
  2009-12-27 21:01:39:469 1068 1410 AU #.
  2009-12-27 21:01:39:563 1068 1410 AU<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2009-12-27 21:01:39:563 1068 a00 Agent *.
  2009-12-27 21:01:39:563 1068 a00 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2009-12-27 21:01:39:563 1068 a00 Agent *.
  2009-12-27 21:01:39:563 1068 a00 Agent * Online = Yes; Ignore download priority = No
  2009-12-27 21:01:39:579 1068 a00 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2009-12-27 21:01:39:579 1068 a00 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2009-12-27 21:01:39:579 1068 a00 Agent * Search Scope = {Machine}
  2009-12-27 21:01:39:579 1068 a00 Setup looking for agent SelfUpdate
  2009-12-27 21:01:39:579 1068 a00 configuration version Client: Core: 7.4.7600.226 to the: 7.4.7600.226
  2009-12-27 21:01:39:859 1068 a00 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2009-12-27 21:01:39:906 1068 a00 Misc Microsoft signed: Yes
  2009-12-27 21:01:40:062 1068 a00 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2009-12-27 21:01:40:078 1068 a00 Misc Microsoft signed: Yes
  2009-12-27 21:01:40:265 1068 a00 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2009-12-27 21:01:40:265 1068 a00 Misc Microsoft signed: Yes
  2009-12-27 21:01:40:359 1068 a00 Setup determine whether a new configuration manager should be downloaded
  2009-12-27 21:01:40:359 1068 a00 Setup SelfUpdate Manager is found.  It will be downloaded
  2009-12-27 21:01:40:359 1068 a00 Setup assessment applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
  2009-12-27 21:02:10:420 1068 a00 installation caveat: Cbs StartSession, error = 0 x 80080005
  2009-12-27 21:02:10:420 1068 a00 Setup FATAL: assessment of the applicability for installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 ' has failed, error = 0 x 80080005
  2009-12-27 21:02:10:420 1068 a00 Setup FATAL: SelfUpdate check failed, err = 0 x 80080005
  2009-12-27 21:02:10:420 1068 a00 Agent * WARNING: jump scan, self-update check returned 0 x 80080005
  2009-12-27 21:02:10:435 1068 a00 Agent * WARNING: exit code = 0 x 80080005
  2009-12-27 21:02:10:435 1068 a00 Agent *.
  2009-12-27 21:02:10:435 1068 a00 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2009-12-27 21:02:10:435 1068 a00 Agent *.
  2009-12-27 21:02:10:435 1068 a00 Agent WARNING: customer WU didn't search for the update with error 0 x 80080005
  2009-12-27 21:02:10:435 1068 eb4 to THE > # RETURN # to THE: research updates [CallId = {10EAE202-2F79-434C-8DD9-139D91EF8079}]
  2009-12-27 21:02:10:435 1068 eb4 to # WARNING: reminder of search failed, result = 0 x 80080005
  2009-12-27 21:02:10:435 1068 eb4 to # WARNING: could not find updates with error code 80080005
  2009-12-27 21:02:10:435 1068 eb4 to THE #.
  2009-12-27 21:02:10:435 1068 eb4 to # END # in THE: research updates [CallId = {10EAE202-2F79-434C-8DD9-139D91EF8079}]
  2009-12-27 21:02:10:435 1068 eb4 to THE #.
  2009-12-27 21:02:15:427 1068 a00 report REPORT EVENT: {6E883F8D-FA80-4BA7-8815-CFF4EA94577D} 21:02:10:420 2009-12-27-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate software failure synchronization Client Windows Update not found with error 0 x 80080005.
  2009-12-27 21:02:15:537 1068 a00 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2009-12-27 21:02:15:537 1068 a00 WER sent report: 7.4.7600.226 0 x 80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 unmanaged
  2009-12-27 21:02:15:537 1068 a00 CWERReporter finish event management report. (00000000)

  Any help would be greatly appreciated.  I tried something that I found the internet search, but nothing helped.

  Thank you!

  Hello

  Try this:

  Definition update fails with error 0 x 80080005 - view this section
  http://TechNet.Microsoft.com/en-us/library/bb418925.aspx

  --------------------------------------------------------------------

  The error can also be caused by malware so please do a thorough check as no program can detect
  and remove all malware. After that you are sure that the system is clean perform the cleanup.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  --------------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Setup error during the update to 12 items, Photoshop and Premiere of beam of 12 elements.

  8 days ago, I bought the upgrade of 12 elements in Photoshop and Premiere of 12 items, Bundle.

  First 12 items works very well, but yesterday, I found that PSE12 does not open.

  This morning, the update 12.1 for both V go back indeed, I downloaded tried to install.

  There are two messages:

  (1) for installation: something like 'turn off AdobeActivityScanner' (which did not work according to the Task Manager)

  (2) after the installation:

  Photoshop elements 12.1 update

  There was an error of installation of this update. Quit and try again later. Error code: U44M1P2003

  How can I fix this problem? I need to work with Photoshop this week.

  Do I need to uninstall this part of the package and re-install? The series will No.still work?

  Help, please. Thank you.

  Yes, you can uninstall and reinstall.

• Error: Could not resolve macro... during the sensitive output to HTML5

  I use RoboHelp 2015. I have a project which was created for WebHelp output. When I compile the project to output Responsive HTML5, it compiles, but with the following errors:

  Error: Could not resolve the macro (IndexFilterKewords) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\Availity_Help.htm)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Loading) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\indextreeloader.js)...

  Error: Could not resolve the macro (GlossaryFilterTerms) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\Availity_Help.htm)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Loading) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\glossarylistloader.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. TopicsNotFound) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_LoadXmlFailed) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_InitDatabaseFailed) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_InvalidExpression_1) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Research) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Cancel) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Aborted) to the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. ResultsFoundText) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\search.js)...

  I saw another post on the forum about these errors (in version RoboHelp 11) suggested that the problem could be related to permissions. I have compiled out of aid to a few different folders I have all permissions, and I always get errors. Any ideas?

  It is a common problem with RoboHelp projects upgraded from earlier versions RH10. This error indicates that your files language is missing some channels. You can resolve it in one of two ways;

  1. Let the Robo to recreate the language file:
     1. In your project, save it! Language! folder.
     2. Delete the folder.
     3. Trash of the CPD and reopen RoboHelp.

        RoboHelp will create a new language file (and if something goes wrong, restore the backup and try Method 2).

  2. Manually update the language file;
     1. Open the language file! Language!/en_US/RoboHHRE.LNG with Notepad or another text editor.
     2. Find the section
        .
     3. For each error ' MSM_CUR_LNG. JS_alert_LoadXmlFailed', create a new entry that contains the text after point as follows:

     4. Save the file.
     5. Open RoboHelp and regenerate.

  (This does not point to Rick invalidate. "It's just that the problem is related differently.)

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• Media Center does not download information Guide - error during the processing of the data

  Media Center displays an error saying I need to look at the log of update, but I can't find the update log. Try to download the Information Guide to hand does nothing.

  Of your last log its connection and download the guide, so there is no connectivity problem as stated above.

  Try clearing the guide and the tuner configuration data and set up once again and then check if the guide updates correctly:

  1. close Windows Media Center if it is open.

  2. go to Start , type services.msc in the search box and press ENTER.

  3. look for the following services and check the status field, if they are started and then right click on them and chose to Stop:

  ·         Windows Media Center Receiver Service

  ·         The Windows Media Center Scheduler service

  4 open tasks now CTRL and SHIFT Manager, and then press the ESC key.

  5. click on the processes tab, then click on Show processes from all users .

  6. in the list, click the name of the Image to sort by name, and then look for the following:

  ·         ehmsas.exe

  ·         ehrecvr.exe

  ·         ehsched.exe

  ·         Ehshell.exe

  ·         ehtray.exe

  ·         mcGlidHost.exe

  7. in the case of imperfections, right click and choose end process.

  8. go to start, in the search box, type the following path: C:\ProgramData\Microsoft\eHome

  9. find and delete the file mcepgX-X - X.db and X-mcepgX-X file

  After that it's over, go through the configuration of the original tuner once again and check if the guide updates correctly.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error during the update of the software

  Hello

  He said: ' year error occurred while searching for new updates on your computer.

  Error code: 80073712

  I searched for this code and did not find any resolution. Any help will be appreciated.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Spectrum of HP x 360 (Lake of set): error during the update of the Bios (c2-error: the region is write-protected)

  Just got the new spectrum x 360 with processor i7 to set Lake.  I love most everything on it, but it's hot in the upper left corner, and temperatures are in the order of 80-90 during a normal charge.  Research of solutions possible and a common solution seems to ensure that the Bios is updated.

  HP Wizard jumped by chance in a message on a Bios updated available.  Perfect timing, so I thought.  Update downloaded BIOS ok, but during the installation, I got the error c2-error message: region is write protected.

  Reflection on the update of the Bios?  I know that one of the recommendations is not not to date Bios at least that something does not work.  Everything seems to work fine, but I think I should update it Bios to see if it solves the problem of heat.  Thoughts on that?

  Thank you.

  Thank you.   It's the strangest thing.  Despite having the error message above and the Bios update process pretending stops, when I rebooted hours later, the Bios updated.  I checked, and it is now the latest version.

  Guess my problem is solved.

• iPhone 5 s error during the update to iOS9.3

  My 5s iPhone won't allow me to update to iOS 9.3, gives me an error saying

  'my phone is no longer connected to the Internet' while I'm connected, help please.

  the 9.3 has been removed for a bit - so please hold off to try to update

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Error during the update of vacancy in oracle iRecruitment

  Hi guys,.

  I have a problem to come to update a vacancy to the iRecruitment.

  ERROR: The required column ATTRIBUTE (also called ATTRIBUTE1) has not received a value.

  Please help me, I think it's an error with the DDF or RESEARCH, but do not know which, or the exact issue.

  Please help me.

  See you soon,.

  Luziah

  Hi Luziah,

  Check the FDF - vacancy details and see if there are any mandatory attributes set.

  See you soon,.

  Vignesh

• ASP is removed during the updating of model

  Hello

  I have a strange problem that I can't seem to find an answer.

  I use Dreamweaver templates, and on some of my individual pages, I also use the ASP code for contact forms.

  In theory, this code is outside the model and should not be removed when I do an update of the model because codeOutsideHTMLIsLocked is set to false.

  The bold code line is the ASP code on the pages of my child, and whenever I update the model of what this line of code is deleted. It seems that if I remove the @ symblo code isn't are deleted. But I don't think that it is no longer valid ASP.

  < % @ Page Language = "VB" CodeFile = "default.aspx.cs" Inherits = "contact form" ResponseEncoding = "utf - 8" % > ' "

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml " " > <!-InstanceBegin model = '... / Templates/Main.dwt.aspx ' codeOutsideHTMLIsLocked = 'false'->

  Now when I run an update on my main model and check the page of my child, the ASP code is deleted.

  The strange thing is that if I use the placeholder instead of this text, it is not stripped/removed from the model.

  The pain, is that I have about 10 pages (for now) to add this line whenever I update the model, what is happening actually more now.

  Anyone know why this particular ASP code is deleted at any time update my hand model?

  Thank you

  M

  / edit: it seems that if I remove the @ eline, I can code for 'stick' and not be deleted.
  

  Since you're using ASP.NET, it seems to me that you probably don't want to use Dreamweaver server behaviors. If you are happy for Dreamweaver lock code outside of theTags (both above) and add the following code inside thein the Templates folder .dwt file:

  This will help keep your ASP.NET code at the top of the page in the pages, created from the template. However, you will not be able to add a new code above or below the HTML code without detaching the template page.

• Style sheets attached to losing during the updating of model

  I create a new site using Dreamweaver CS3, temporarily transferred to:

  http://www.sharpeacademy.co.UK/Nick-Jackson.co.UK/sharpeacademy/theatrearts/

  All my pages are created from a master template that contains the formatting for the header, sidebar and footer.

  When these pages were created, I joined the new stylesheets as and when I added new sections to the main content area.

  Is the problem that I have now, when I update the model that all these style sheets are detached from the relevent pages and I have to reinstall every time. I tried to attach them to the model, but it did not help.

  When I place the link inside or update the model that I lose the fomatting.

  When I re - joining the stylesheet through the css palette, it is Dreamweaver which puts the link here:

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

  http://www.w3.org/1999/xhtml">

  Your comments leave me scratching my head because you are saying something that is completely impossible!  Update a model cannot possibly modify content in all areas can be changed to a child page - otherwise you could ever have unique content on any page of the child in your site.  And using DW to add a linked CSS file to a page of child model may not be adds this link in a region cannot be changed on the child page, since this is not how the markup model works in DW.

  I have no doubt that you describe precisely what you see, however.  So we clearly have to Miss essential information on your environment or configuration.  At the moment I can't imagine any scenario that would produce these symptoms, however.  Can you transfer your template somewhere and post a link directly to it, so we can start looking for the missing link in the template code?

  In addition, please tell us - do you use nested templates?