Could not import in the library of Widgets

Similar Questions

• Could not import all the Favorites in IE 8

  Recently experienced the premature death of all new hard drive, but was able to save the files including the IE Favorites on a flash drive.  Now, try to import the Favorites in IE 8 (there are 1 500 +, separated in subfolders).  Export the main folder on the flash drive was not a problem.  How can I import the entire lot without doing each one individually?

  http://support.Microsoft.com/default.aspx/KB/211089/en-us

  Internet Explore 7

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Add to Favorites, and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Export Favorites, and then click Next.
  4. Click Favorites , and then click Next.
  5. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  6. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  7. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  8. Click Finish.

  Internet explore 8

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click export to a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  5. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  6. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  7. Click export.
  8. Click Finish.
  Back to top

  Import Import Favorites to Internet Explorer 6 and earlier versions

  Use the Bookmarks Converter tool to import the Bookmark.htm file into Internet Explorer on Windows 95, Windows 98, Windows 98 Second edition, Windows Millennium Edition, Windows NT 4.0, or Windows 2000.

  Import Favorites to Internet Explorer 7

  1. In Internet Explorer 7, click Add to Favorites , and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Import Favoritesand then click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next. Or, click Browse, and then click Next to accept the default value.

  4. Select the folder where you want to place the imported bookmarks, and then click Next.
  5. Click Finish.

  Import Favorites from Internet Explorer 8

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click import from a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next.
  5. Select the folder where you want to place the imported bookmarks, and then click import.
  6. Click Finish.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

  Original title: error Ordinal 62
  I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

  Hello

   

  You can try the following steps and check.

   

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check the following thread link and check.

  WARNING 62 Ordinal not found in cscdll.dll

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Import photos, but they do not show in the library

  I use Lightroom 2.7.  Until today, the import function worked fine.  I added two pictures my D700 RAW (NEF) files to my

  hard drive and even today, when I imported into Lightroom, they seemed to be imported, but folder names do not appear in the library of files list.  The only way I see pictures is in the list "recently changed" even if they have not been changed recently.  So if I want to treat one of them, I can't find them.  I tried to import a second time, but it made no difference.  Anyone got any suggestions?

  Charlie

  If you have added metadata to import, they will show also recently updated the. Try looking at the metadata of a file by using the quick preset describe. One of the fields is the folder, click the arrow next to him to go to the file of the folder is in.

• solution for them 'could not import mp3 library"for cc flash on mac os?

  HI all, I searched for an answer to this problem and come out dry. The file is 44.1 kHz form my iTunes library. I tried to import the import in the library and the scene and tried to drag and drop the form office in the flash workspace but nothing works. Any help appreciated.

  Appreciate the response. It turns out that I had to re - sample mp3 in encode 196 Kbps. It worked perfectly then.

• Startup error: wlstartup.exe the proecedure entry point is not found in the library of dynamic links UXCore.dll

  Original title:wlstartup.exe

  What follows is popping up on our computer when to start-"the proecedure entry point? GetHeight@CRMImage@@QBEHXZ not found in the library of dynamic links UXCore.dll"- what's going on and how clean us this up - thank you

  Hi chattums,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Method 1: Issue of wlstartup.exe could be caused by an installation Windows Live damaged or broken; You can see the steps by Joe Cap and Halima S, in the link below that relates to a similar question.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/55aa850a-e2d3-4816-820F-5caf0a766b44

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• Cannot import songs in Windows Movie Maker, we get an error "could not import.

  Original title: wrong to import the music after hard drive now

  I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem.  I had to put in a new hard drive on my computer and now I cannot import new songs.  Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import.  Any ideas what I am doing wrong?

  Hi SHennessey,

  (1) what is the complete error message you receive?

  (2) what is the format of the file?

  Method 1: For files that can be imported into Windows Movie Maker, see the link below.

  Can what types of files I import?

  Method 2: To check your video filter settings, follow the steps mentioned below

  (a) in Windows Movie Maker go to the Tools menu

  (b) click on Optionsand then click the compatibility tab

  Now, check if the problem persists

  See the link below

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker