Could not import mx.graphics.codec Flash

Similar Questions

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Cannot import songs in Windows Movie Maker, we get an error "could not import.

  Original title: wrong to import the music after hard drive now

  I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem.  I had to put in a new hard drive on my computer and now I cannot import new songs.  Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import.  Any ideas what I am doing wrong?

  Hi SHennessey,

  (1) what is the complete error message you receive?

  (2) what is the format of the file?

  Method 1: For files that can be imported into Windows Movie Maker, see the link below.

  Can what types of files I import?

  Method 2: To check your video filter settings, follow the steps mentioned below

  (a) in Windows Movie Maker go to the Tools menu

  (b) click on Optionsand then click the compatibility tab

  Now, check if the problem persists

  See the link below

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

• Zoo Tycoon 2 error: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest driver. »

  I am running Zoo Tycoon 2 on Windows 8 with a Nvidia GeForce GTX645.  I installed ZT2 and get the following error when you try to play: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest version of the driver.

  I already did so that my drivers are up to date.  Any ideas?  Thank you!

  Hi Luanne,

  The problem is specific to a Zoo Tycoon 2?

  This problem may occur if the graphics drivers are damaged. I suggest to uninstall and reinstall graphics card drivers and check if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  See the link to download the drivers:

  http://www.GeForce.com/drivers

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Could not import title animation After effects Bridge

  In Adobe Bridge, I click on an animation effect I like, and there's a window saying to burst: after effects error: could not import the random word shuffle in.ffx: unsupported file type or extension (0::1)

  If anyone is familiar on how to solve the problem, it would be very useful!

  Geneviève

  We need the details of the version and the operating system. If you use 13.8 - do you have installed the update on 13.8.1?

  After Effects 2015.3 CC (13.8.1) corrections update is now available. Creative blog Cloud by Adobe

• Could not import raw NEF images in items 10

  Can someone help me please? I have already installed an update of the plugin and restarted my computer.

  I have a Nikon D 750, which had to be supported with the latest plugin download.

  Could not import raw NEF images in items 10

  Melissa,

  I did some googling, and it seems that your D750 needs 8.7 ACR (Adobe Camera Raw version 8.7).  My camera needs ACR 8.3, but apparently 11 elements does not support this update. I have a feeling that your 10 PES is the same (no support ACR 8.7) for your camera.

  So, we can:

  (1) use the supplied software to Nikon for RAW files, convert to jpeg, and then open in PSE,

  (2) download: free Adobe, something called a converter DNG (?) that creates a DNG file to open to post-secondary studies, or

  (3) buy a newer version of elements, where the version supported with ACR IS compatible with your camera

  I'm not sure 100% accuracy of this info, but so far, that's what I found. Personally, I do not have these options.  I want to be able to work in PSE raw, but having to spend ANOTHER $100 or so just for this feature seems wrong.

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import any type of audio file in my project in AECS5 files

  I am trying to add sound effects to an animation of titles for the first time. When I tried to import a .wav file, I got this error:

  after effects error. Could not import the file (filename.wav) not taken supported filetype or extension

  I have converted the file to .mp3. Still did not work. I converted the file .aiff, wma and nothing worked.

  What is the problem? Better to simply animate in AE and sound effects of entry into first?

  Help, please!

  Z

  > Why is it better to have the project files on an external drive?

  It is best to have your operating system and the applications running a disc, your source media read on the other, and written to another export your files. In this way, the hard drive doesn't have to jump around to read and write from several different locations at the same time essentially.

  There are many tips to improve performance here, including a response to your question about proxies.

  > Can you put the link where I can dl the AE 10.0.1 update

  Choose Help > updates. You should do quite often. Here is a page with the details of the recent updates.

  Regarding your first question: you can't import audio files? This type of video files that you have imported successfully?

• Could not import the pdf file to the library in Flash CS4

  I need to import files of pdf text three in my Flash CS4 for use in a project that I am doing, but whenever I try to import these pdf files at the library I get an error that reads 'one or more files were not imported because he had problems reading of their.

  I use Adobe Reader X, which is the last available drive, Flash CS4 and Windows Vista Home Premium and I don't understand why I can't import PDFs in Flash. Any help would be greatly appreciated!

  Zlloyd

  PDF is not supported in flash file type.

• Could not import the DataProvider

  If I open a new file in Flash (AS3) in Flash CS3 Professional and try to import the DataProvider (import fl.data.DataProvider;), I consistantly receive a compile error (1172: definition fl.data:DataProvider could not be found). Does anyone know what is the problem?

  Definitions of components AS3 source, by default, not are not in the
  classpath of your Florida they are available in the
  \Configuration\Component Source\ActionScript 3.0
  folder of your Flash CS3 installation directory, however the components
  themselves rely on versions precompiled classes in the so-called
  as the ComponentShim. These assets are in your library, when you add
  a component in your library or the screen to the Panel components. His
  Located within the component assets > _private folder. Without this asset
  in your library, you will not have access to the component classes. What if
  you want to refer to a component dynamically, it will have to be added to
  your library before you publish your SWF file. The ComponentShim contains only
  the kernel LIKE classes, not the real components that rely also on the other
  graphics and movie clips that should be in your library before a
  components can be used in your SWF file

  "PalacaJoe" wrote in message
  News:f2a9m7$LKM$1@forums. Macromedia.com...
  > If I open a new file in Flash (AS3) in Flash CS3 Professional and try to
  > Import
  > DataProvider (import fl.data.DataProvider;), I invariably receive a
  > compiler
  > error (1172: definition fl.data:DataProvider could not be found). Does
  > someone at - it
  > know what's the problem?
  >

• Could not import the .fla files

  Good evening friends,

  I can't import the files flash adobe flash professional cs6. The message I get is:

  "One or more files could not be imported because the problem occurred during the import"

  I need quick help.

  Thank you in advance.

  Ersin

  Fortunately, that said asymmetric is not correct, as well not be what you were asking about.

  You can open any FLA of CS5.5 or later, in any version, CS5.5, or later. At this time they did the files be future-proof. New feature does not work and could lead to problems, but the file should open ok.

  But back to what you asked, you would never import a FLA, then don't means you that you try to import a SWF file? They are sovereign, there's a number of Flash Pro version where the ability to import SWF has been removed. Not sure if including CS6. Nowadays you can import SWF files, but you wouldn't get the ActionScript code.

  If the SWF file is set to be protected, then that would also lead to errors. You are much better if you can find the original Florida

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Could not import the AVI in Movie Maker

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  ==========================================
  Since you want a DVD... have you tried DVD Maker? If the file will be
  not import... it may be worth trying to convert it to .wmv format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Could not import the song to itunes in windows movie maker

  codec of WMM?

  My work incredible WMM but when try to take a song on itunes and put it on there he said, "cannot be imported because the codec required to play the file is not installed on your computer.» If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file"I don't know what codec to install or download

  Convert music files to the WMA format and it
  import into Movie Maker successfully.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...