Could not import the class with CFCS

Similar Questions

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the GIF with transparency

  After trying to add GIF files in Adobe After effects, I received the error "after effects error: file"Flag.gif"cannot be imported - this".gif"file is damaged or not supported."

  I then noticed each gif without transparency imported correctly. The gifs without transparency received the error. Is there a way to fix this?

  I'm under Windows 8 12 GB of ram with a 3.7 ghz if processor speed would for some reason any to do with it.

  Open your GIF animated in Photoshop, change the RGB color space, save it as a PSD and import as a composition.

  Trim and sequencing layers to enable composition in a movie. This gives you a better quality and more options than to try to work directly with the GIFs. It will work with any animated GIF.

• Could not import the user with Exchange 2003 to unity 4.0.1

  We had a user leave and come back 2 weeks later. Its AD account has been maintained, but his e-mail and voice mail have been removed. When we activated its AD account and created a new box of e-mail, it can operate on the network and Outlook. However, the unit 4.0.1 it can not see when I try to create a voicemail for her using "import of exchange functionality. Anyone know why or how to fix this?

  Geoff

  It is likely that the unity of this user properties are always on account of the AD and the unit won't you not re-import them because he thinks they're alread a Subscriber. If you had deleted them as a Subscriber first before deletion of their AD box so it wouldn't be a problem - but assuming that wasn't the case I guess that this is your problem.

  The best way to proceed is to pop open the tool Global Manager of Subscriber in the warehouse of tools on your desktop. Navigate to the server of the unit you want and right click and select 'Import users' in the dropdown menu drop-down. The import users dialog box, navigate to the folder AD in that the user is and right click on them - if the option ' remove subscribed real estate "appears, select it and they will be 'cleaned '. Then you can right click on them again and import them (or do through the SA at this point if you really want to).

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• Could not import the file xvid .avi with Premiere elements 11

  I just bought 11 first, and it won't import a xvid .avi file. The codec is installed, such as reported by G-Spot. And the file is important to Win Movie Maker very well. No known here problem?

  Thank you

  Unfortunately, pre cannot change with all the CODECS and especially delivery only the CODEC, such as DivX and Xvid.

  Some users have had good luck with importing and editing very latest versions of these CODECS, in the latest versions of PrE, but this is rare. Generally, the file will not import, but if this is the case, then there are usually Audio with no video or the video is so bad, they are not not useful.

  For more information about CODECS, in general, see this FAQ entry: http://forums.adobe.com/thread/546811?tstart=0

  For Xvid or DivX, I convert it to DV - AVI, and then import this file converted for editing. In my case, I use a previous shareware, DigitalMedia Converter 2.7 program. Now there are newer versions of DMC.

  Some users report such CyberLink PowerDirector and Magix MovieEdit Pro do a better job with the Xvid and DivX CODEC, but none is perfect.

  Good luck

  Hunt

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Could not import the Clipboard because an unexpected end of file was encountered.

  This one is particularly annoying.  I use Creative Suite 2, Photoshop

  with Windows XP Pro.  I have the latest updates.

  When I open Photoshop, I constantly have the message "couldn't".

  import the Clipboard being an unexpected end of file

  met. "I hit [OK] and the message reappears in about 5 sec.

  I ran so much Photoshop as the first point of access on the computer (front for)

  all that is in the Clipboard) and I manually deleted the

  Clipboard.

  I have also reinstalled the CS2.

  Help, please...

  Operating instructions that can help you:

  (1) open Photoshop.

  (2) hold down 'Alt', 'Control' and 'Shift' at the same time as the launch of the program.

  (3) select the option to remove all of the current settings. All preferences and settings that you have changed will be returned to their default initial value.

  (4) close all applications and access your Photoshop plug-in folder. The location of this will depend on the version of Windows you are using. If you use a 32-bit edition, you'll find to "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins. If you use a 64-bit edition, you'll find in "C:/Program Files (x 86) / Adobe/Adobe Photoshop CS5 CS4/Plug-Ins or" or "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins.

  (5) select plug-ins not published by Adobe and follow the instructions to remove.

  (6) visit the Photoshop update page to find and apply updates for the version you are using.

  (7) relaunch Photoshop and try it.

  As alternatives could be presented...

  the http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/1486-error-message-in-psd-fi - ask questions and read the various cases of corruption of file .psd

  https://www.repairtoolbox.com/photoshoprepair.html Photoshop repair kit - one of the tools provided restoration of .psd files corrupt

• Could not import the platform of error

  Hello
  
  I started the 3.1.0 agent HQ (the version with the included JRE) on a RedHat Linux 9 server and runs the automatic detection of the console of the server process. He discovered the new server as it should, but when I clicked on the button "Add to inventory", I got an error (see below).
  
  Impossible to import the platform: RuntimeException. nested exception is: org.hyperic.hq.common.SystemException: javax.ejb.TransactionRolledbackLocalException: error creating data IA platform: servers of type "FileServer" could not be created on the "Home network" type platforms CausedByException is: creation of data IA platform error: type servers 'FileServer' cannot be created on platforms of type "home network".
  
  Why is this happening?
  
  Thank you
  Brian

  I think there may be a misunderstanding here.  When you say that you "ran the autodiscovery process", which means exactly?  You shouldn't have to do anything else that start the agent on the platform, and then set up your dashboard HQ.  The platform will appear in the queue of the self-inventory and you can then import the platform and all discovered resources.  This type platform sounds like it should be "Solaris" and not "network host.  HQ thinks that it is a network host, leads me to believe that you tried to create a platform manually instead of using the discovery platform created to start the agent.

  Try the following steps:
  1 stop the agent on the affected platform.
  2. remove any resource platform linked to this inventory of HQ
  3. delete the "data" of the installation of the Agent HQ directory
  4. start the Agent from HQ (you will need to provide the login information from server again)
  5. connect to Headquarters as the superuser and look in the auto - inventory of your dashboard portlet.  The platform should appear there.
  6. Select the platform and click on the button to import it into your inventory HQ

  It should work, if not answered and I will work with you to get your server.log and agent.log and troubleshoot more.

• Could not import the Photoshop PSD

  It's weird. Try to import a PSD file. Message body cs6 error is "we were unable to open the file on the disk."

  The file is a fixed image that came to me as a JPG. I've read it in Photoshop cs6, cropped it, because the canvas 1920 x 1080 (to match the size of the sequence of the organism), tinkered and ended by running the action of course broadcast on this subject Luminance. Then I saved it in the body as a project folder *. PSD file. As I did hundreds of times now with dozens of projects.

  Attends agency cs6. Find the file using media browser. File... Import media browser gives me a window with the error message "We cannot open the file on the disk." Preview the Source monitor fails.

  What makes this even more frustrating, it is that the organization can find and open the file that I worked on just before this one. Same conditions, same process, same repertoire, same protections on files (I checked that). Two files seem to be exactly the same except for the file name and the content of the file. Everything else is also identical to that I can do. And none of my hard drives are even half full, so it shouldn't be a question of space.

  So if the organization can read one, why can't he read the other? And what I can do to get the Organization to behave correctly and read the file? Files do not appear to be corrupt - Photoshop can read them both very well. In any case, I've recreated the problem from the source repeatedly *.jpg file now so I think I can exclude from Photoshop file corruption on. Perhaps.

  I ruined my brain for 90 minutes trying to understand what has changed between the first file that works and one that doesn't. I came up empty. I worked on one, then the other, then imported the first on body (which worked), and then imported from the other in the body (which failed). Exact same source (both files were attachments on e-mail even *.jpg), same workflow, saved in the same directory. ARGHHHH!

  I did most of the 'usual suspects '. I left off Photoshop both body and restarted. I saved the file problem in other formats (same error no matter what format). So, I turned to Teh Google, that does not turn a large part that relates. Could not find anything in the Adobe Help documentation. So everyone here tell me what is happening?

  --

  Bruce Watson

  Few things to check - is the color of the RGB PSD Mode. It cannot be CMYK, or some other.

  I had problems with dynamic objects, because sometimes, they import all right, but not always.

  Layers of tiny (a few pixels x pixels) were causing problems.

  Adjustment layers have been known to cause problems.

  Normal layers, so long not tiny, always worked perfectly for me.

  Anything else that comes to my mind, but good luck.

  Hunt

• Could not import the DataProvider

  If I open a new file in Flash (AS3) in Flash CS3 Professional and try to import the DataProvider (import fl.data.DataProvider;), I consistantly receive a compile error (1172: definition fl.data:DataProvider could not be found). Does anyone know what is the problem?

  Definitions of components AS3 source, by default, not are not in the
  classpath of your Florida they are available in the
  \Configuration\Component Source\ActionScript 3.0
  folder of your Flash CS3 installation directory, however the components
  themselves rely on versions precompiled classes in the so-called
  as the ComponentShim. These assets are in your library, when you add
  a component in your library or the screen to the Panel components. His
  Located within the component assets > _private folder. Without this asset
  in your library, you will not have access to the component classes. What if
  you want to refer to a component dynamically, it will have to be added to
  your library before you publish your SWF file. The ComponentShim contains only
  the kernel LIKE classes, not the real components that rely also on the other
  graphics and movie clips that should be in your library before a
  components can be used in your SWF file

  "PalacaJoe" wrote in message
  News:f2a9m7$LKM$1@forums. Macromedia.com...
  > If I open a new file in Flash (AS3) in Flash CS3 Professional and try to
  > Import
  > DataProvider (import fl.data.DataProvider;), I invariably receive a
  > compiler
  > error (1172: definition fl.data:DataProvider could not be found). Does
  > someone at - it
  > know what's the problem?
  >

• Could not import the package for the simultaneous java program

  Hi all
  I'm trying to work on simultaneous java program, but when I tried to import these classes
  
  Import oracle.apps.fnd.cp.request.CpContext;
  Import oracle.apps.fnd.cp.request.JavaConcurrentProgram;
  
  the compiler is to launch
  Cannot access the oracle.apps.fnd.cp.request.CpContext of the class; file not found oracle\apps\fnd\cp\request\CpContext.class
  
  It is not giivng cp package
  
  Please can someone have idea, what could be the reason.
  
  Thanks in advance
  
  concerning
  Pratap

  Pratap,

  Please download the files from cpcontext package structure which is oracle.apps.fnd.cp.request.CpContext
  go to the google or other search sites or download it on the unix application server $JAVA_TOP/oracle/apps/fnd/cp/application/CPContext.
  If it's a class file and then convert it to java file using java decompiler.
  then plalce the respective folder by creating the folder of this name. for example if
  the structure of package is oracle.apps.fnd.cp.webui files to create in the MyProject jdeveloper folder
  Oracle, then under oracle folder cretae aapps folder and so on...

  Thank you
  Kumar

• Could not import the bookmarks file large

  I recently bought another computer on Windows. I installed Firefox and tried to import my bookmarks (html) file. I could only import files into my favorites and nothing else. Then I open my file of bookmarks in Firefox and bookmarks I want are still there. The bookmarks file is 15.8 mb in size. Do I need to split this file and, if so, how could I do?

  Thank you!

  If you still have the old computer, you can try backup .json (using the backup instead of export). With the new system, restore the .json file.

• Could not import the mp4 (not corrpution) files in pictures

  When I try to import the mp4 files captured with a Samsung Galaxy S2 in pictures, I get the error: "None of these files can be imported into your photo library.". But I can import screenshots of mp4 files with a Huawei Mate 7 in pictures (and two phones jpg files). None of the files are corrupt, I can play them perfectly with any player capable of mp4. I run the latest versions of Photos and El Capitan.

  Any idea what the problem could be the announcement how to solve?

  Thank you very much

  lotlorien

  Hello

  This remains true to the 2016-05-12 with OS X 10.11.4 and photographs. 1,5.

  Anyone any idea how to solve this problem? Perhaps there is a simple way of editing .mp4 files and they I can import them?

  Thank you

  lotlorien