Could not import the database using impdp via network_link

Similar Questions

• import the database using impdp

  Hello
  
  I want to import a database using impdp. Can I import while I'm connected with system / < password >? On what data should I be connected? I have a single database, "orcl".
  
  Thank you

  So that the .dmp file exists, and the exported database name is "scoala" (has been exported from 10 g). Now, I have installed Oracle 11 g. And I don't have a database "scoala. I > need to create it first and then invoke the impdp?

  Yes. create scoala of database with storage spaces and to import.
  If you have exported (with full = y) before scoala, you can use impdp option SQLFILE to generate the DD(Tablespace,users_and_etc).you can use any available database just to get this information.

  -André

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• application could not load the database

  I have a RoboHelp 9 project that I left open on my computer at night and microsoft updates ran causing my computer to restart.  When I try to open my project in RoboHelp 9, I get the following error:

  Open a project has been cancelled or the application could not load the database for 'C:\CODE\HELP\HELP. CPD»

  How can I fix the CPD file without restarting?

  Hello

  Just delete the CPD and re - open the project. When RoboHelp sees is missing, it will cook in the oven until a new use and then all should be well.

  See you soon... Rick

• BlackBerry Smartphones could not initialize the databases during synchronization of Blackberry Desktop Software

  The said software "could not initialize the databases" and does not sync my BB.  This has happened for a week.  I reinstalled the Desktop software, reset to factory settings, restore a backup file, did a hard reboot by removing the battery, tried to synchronize an element (calendar, contacts, tasks, notes), at one time, updated BBM all to nothing does not... Help.

  Looking at the synchronization log, he said this...

  14:49:29.765 CRSyncUtil::BackupCacheDBs: error copy of the file 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc' to 'C:\Documents and admin Local Settings Application Data is in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Data\4_65538_PR.tdc.sav': 0 x 00000070 (there is not enough space on the disk.)

  I looked at this file and at the time I started to get into trouble.  It was enormous... I have moved out of the directory and tried to re-sync.  It worked!

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Lost all bookmarks. Could not import the USB key or IE and cannot restore from previous dates. Help!

  One day all my favorites have disappeared. I tried importing bookmarks from a USB key, but couldn't.
  Tried to import Mie... no luck. I tried "restore" using an old version date... no luck.
  Nothing has worked. Using Firefox 18.0.
  Computer operating system is Windows Vista Home Premium.
  Any help would be greatly appreciated.
  Thank you.
  Rodney

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  See also:

  • http://KB.mozillazine.org/Lost_bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• PS Installation: Engine command line Application error - could not sign the database &lt; SID &gt; PS user

  Hi all

  I have this problem, tried all means but couldn't solve it. I'm installing peoplesoft on my laptop. PS HCM 9.2 and peopletools 8.53.

  I followed all the procedures explained in the installation guide 8.53 (little missed - such as running app engine after creation of the database). I installed the application server, process schdueler, Web server for my instance and successfully connected to PIA. But I see errors from the compiler Peoplecode as first thing after the connection. Analyzed and found that this is due to lack of a few steps after the creation of the database such as the importation of PPLTLS84CUR, PPLTLS84CURDEL and race engines of demand and the additional dms scripts given in table of installation. (Please correct me if I'm wrong!)

  So I loaded PPLTLS84CUR, PPLTLS84CURDEL, PT84TBLSPC built the project, ran grant.dms and rarest dms as stated in the guide, started with the drivers of demand. I gave order below:

  ETAS - CD PSHCM CT - ORACLE - CO PS - CP PS R INSTALL - I UPGPT850PTFP

  It gives me below error:

  D:\PT8.53\bin\server\WINX86 > ETA - CD PSHCM - CT ORACLE - PS - CP PS r INSTALL CO

  HAVE UPGPT850PTFP

  Failure of LoadLibraryA() in pscompat.dll to 'PSORA64.dll': reason = 193

  Error sign on

  Type of database: 7 (ORACLE)

  The database name: PSHCM

  Name of the server:

  OperID: PS

  ConnectID: people

  The process instance: 0

  Reason: Could not sign database PSHCM with PS user

  But with the same credentials PS/PS given in psprcs.cfg I can start the process schduler, login in the application, or same PIA Designer.

  Please let me know if I'm missing something here. Even tried with SYSADM, but no luck.

  Thank you

  RK

  My bad. Actually I'm supposed to run record. I was running it from the server folder.

  It's real record where I suppose to run AE:

  D:\PT8.53\bin\client\winx86

  Thank you

  RK

• Could not import the Clipboard because an unexpected end of file was encountered.

  This one is particularly annoying.  I use Creative Suite 2, Photoshop

  with Windows XP Pro.  I have the latest updates.

  When I open Photoshop, I constantly have the message "couldn't".

  import the Clipboard being an unexpected end of file

  met. "I hit [OK] and the message reappears in about 5 sec.

  I ran so much Photoshop as the first point of access on the computer (front for)

  all that is in the Clipboard) and I manually deleted the

  Clipboard.

  I have also reinstalled the CS2.

  Help, please...

  Operating instructions that can help you:

  (1) open Photoshop.

  (2) hold down 'Alt', 'Control' and 'Shift' at the same time as the launch of the program.

  (3) select the option to remove all of the current settings. All preferences and settings that you have changed will be returned to their default initial value.

  (4) close all applications and access your Photoshop plug-in folder. The location of this will depend on the version of Windows you are using. If you use a 32-bit edition, you'll find to "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins. If you use a 64-bit edition, you'll find in "C:/Program Files (x 86) / Adobe/Adobe Photoshop CS5 CS4/Plug-Ins or" or "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins.

  (5) select plug-ins not published by Adobe and follow the instructions to remove.

  (6) visit the Photoshop update page to find and apply updates for the version you are using.

  (7) relaunch Photoshop and try it.

  As alternatives could be presented...

  the http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/1486-error-message-in-psd-fi - ask questions and read the various cases of corruption of file .psd

  https://www.repairtoolbox.com/photoshoprepair.html Photoshop repair kit - one of the tools provided restoration of .psd files corrupt

• Could not import the platform of error

  Hello
  
  I started the 3.1.0 agent HQ (the version with the included JRE) on a RedHat Linux 9 server and runs the automatic detection of the console of the server process. He discovered the new server as it should, but when I clicked on the button "Add to inventory", I got an error (see below).
  
  Impossible to import the platform: RuntimeException. nested exception is: org.hyperic.hq.common.SystemException: javax.ejb.TransactionRolledbackLocalException: error creating data IA platform: servers of type "FileServer" could not be created on the "Home network" type platforms CausedByException is: creation of data IA platform error: type servers 'FileServer' cannot be created on platforms of type "home network".
  
  Why is this happening?
  
  Thank you
  Brian

  I think there may be a misunderstanding here.  When you say that you "ran the autodiscovery process", which means exactly?  You shouldn't have to do anything else that start the agent on the platform, and then set up your dashboard HQ.  The platform will appear in the queue of the self-inventory and you can then import the platform and all discovered resources.  This type platform sounds like it should be "Solaris" and not "network host.  HQ thinks that it is a network host, leads me to believe that you tried to create a platform manually instead of using the discovery platform created to start the agent.

  Try the following steps:
  1 stop the agent on the affected platform.
  2. remove any resource platform linked to this inventory of HQ
  3. delete the "data" of the installation of the Agent HQ directory
  4. start the Agent from HQ (you will need to provide the login information from server again)
  5. connect to Headquarters as the superuser and look in the auto - inventory of your dashboard portlet.  The platform should appear there.
  6. Select the platform and click on the button to import it into your inventory HQ

  It should work, if not answered and I will work with you to get your server.log and agent.log and troubleshoot more.

• DBUA could not determine the database version. Upgrade from 10.2 to 11.2

  I am trying to improve my database of version 10.2 to 11R2. I have already installed the software in a new Oracle home directory, and now I use the upgrade database wizard according to the instructions. In the section select your database, when I hit the next button after selecting my database I get the error "DBUA could not determine database version. Make sure that the version of the database is supported for upgrade". I have already confirmed that the upgrade from 10.2 to 11R2 database is supported. Does anyone know how to fix this?
  
  Thank you

  Apply the 4547817 hotfix that upgrades your database to 10.2.0.2 and then you can directly go to 11.2.0.2

• Could not import the Photoshop PSD

  It's weird. Try to import a PSD file. Message body cs6 error is "we were unable to open the file on the disk."

  The file is a fixed image that came to me as a JPG. I've read it in Photoshop cs6, cropped it, because the canvas 1920 x 1080 (to match the size of the sequence of the organism), tinkered and ended by running the action of course broadcast on this subject Luminance. Then I saved it in the body as a project folder *. PSD file. As I did hundreds of times now with dozens of projects.

  Attends agency cs6. Find the file using media browser. File... Import media browser gives me a window with the error message "We cannot open the file on the disk." Preview the Source monitor fails.

  What makes this even more frustrating, it is that the organization can find and open the file that I worked on just before this one. Same conditions, same process, same repertoire, same protections on files (I checked that). Two files seem to be exactly the same except for the file name and the content of the file. Everything else is also identical to that I can do. And none of my hard drives are even half full, so it shouldn't be a question of space.

  So if the organization can read one, why can't he read the other? And what I can do to get the Organization to behave correctly and read the file? Files do not appear to be corrupt - Photoshop can read them both very well. In any case, I've recreated the problem from the source repeatedly *.jpg file now so I think I can exclude from Photoshop file corruption on. Perhaps.

  I ruined my brain for 90 minutes trying to understand what has changed between the first file that works and one that doesn't. I came up empty. I worked on one, then the other, then imported the first on body (which worked), and then imported from the other in the body (which failed). Exact same source (both files were attachments on e-mail even *.jpg), same workflow, saved in the same directory. ARGHHHH!

  I did most of the 'usual suspects '. I left off Photoshop both body and restarted. I saved the file problem in other formats (same error no matter what format). So, I turned to Teh Google, that does not turn a large part that relates. Could not find anything in the Adobe Help documentation. So everyone here tell me what is happening?

  --

  Bruce Watson

  Few things to check - is the color of the RGB PSD Mode. It cannot be CMYK, or some other.

  I had problems with dynamic objects, because sometimes, they import all right, but not always.

  Layers of tiny (a few pixels x pixels) were causing problems.

  Adjustment layers have been known to cause problems.

  Normal layers, so long not tiny, always worked perfectly for me.

  Anything else that comes to my mind, but good luck.

  Hunt

• Could not import the flash file in presenter

  I am running presenter 7.0 in PPT 2007. Other than the problem I have with a video file flash, it seems to work correctly.

  I created a flash video in Captivate (it is a demonstration of the short software), and I want to integrate it into a presentation using Presenter. But when I select "insert a swf file" tab in Adobe Presenter, I never have a chance to select the swf file I want.

  I expect a file at this point selection dialog box. Instead, I went to Internet Explorer and more, nothing happens.

  The flash file works fine as a stand-alone running in Internet Explorer.

  Is "Insert a swf file" the right way to add this video? Is there a better way to incorporate this Captivate video?

  A dead end I tried already: I looked at the description of the problem ' video import failed. Adobe Presenter 7.0.7', but this is not my problem. I'm running (not 7.0.7) 7.0, and the registry key mentioned on the Adobe Presenter support site (TreatFLVCheckWarningAsError) is not present on my computer.

  Thanks for your help.

  -George

  OK, I recommend all first that inquire through the Adobe update 7.0.6 or 7.0.7 via the download available to the public at http://www.adobe.com/products/presenter/.

  As for your question to import the flash file, if you use Captivate 5 or 5.5 he published in AS3 (ActionScript 3) only, and presenter 7.0.0 - 7.0.6 is an AS2 application. Therefore, your Captivate SWF files will not work in presenter. So, if you use Captivate 5 or newer, you must go to introduce 7.0.7 to SWFs to work.

  The problem you describe seems to me that you are working on a PPT file located on a shared drive. Presenter do not work with files that are not on your computer and will tend to not show the Insert Flash, video or Audio dialogs if the presentation is on a shared drive.