BlackBerry Smartphones could not initialize the databases during synchronization of Blackberry Desktop Software

Similar Questions

• Start Thunderbird pop - up said "could not initialize the security component.

  Hello
  Thunderbird started the following window pops up suddenly. No problem during the morning session.
  Draw the attention of
  "Could not initialize the component of application security.
  The most likely cause is problems with the profile of your application directory.
  Please check that this directory has no read/writerestrictions. ETC.»
  I checked in the T / B profile folder.
  'Certificate Mgr' window is empty (no ads).
  So is the window "Mgr Device.
  I couldn't find the mentioned restriction "read/write".

  http://KB.mozillazine.org/Could_not_initialize_the_browser_security_component

• The attention! "Could not initialize the component of the application security...". »

  I started receiving this alert after restart last Saturday (22/02/2014) and freezes before Thunderbird it is fully operational: (incorrect application behavior?)

  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  I have over 500 GB free on the hard drive and have checked the TTBOMA directory. As recently as this
  morning I still once uninstalled using TB TB uninstall utility, rebooted and reinstalled from the Mozilla Web site. Nada,.

  Toshiba Satellite L875D
  Windows 8

  Troubleshooting Info:

  Thunderbird
  Version 24.3.0
  User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; RV:24.0) Gecko/20100101 Thunderbird/24.3.0

  Any help out there?

  Delete the file cert8.db in Thunderbird profiles folder.
  
  This will remove all the intermediate certificates Thunderbird has stored.

  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird
  • https://support.Mozilla.org/KB/couldnt-initialize-applications-security-component

• get the message "could not initialize the browser security component" offers solutions does not

  I get a message "could not initialize the browser security component" more a screen empty. 5 solutions offered in aid, only to create a new profile help, but this helps only for this session! So, I'll have to create a new profile each time I start Firefox. This means not favourites, without Add-ons (they require a reboot), etc. I even tried to delete the profile by default, but it does not help. The new profile is deleted whenever I start. What should I do?

  I've done this several times. The new profile would work for a single session. Each time, Firefox (or something) would remove the new profile, so he did not; I'm done with the default profile, which was obviously altered. Here's what finally worked. Of after your 1st answer, I saw that the other profiles exist as subfolders in the profiles folder, even if they were not listed when I did firefox.exe - p. So, I got the idea to uninstall Firefox and see if these files were still there. And they were! In fact, records of Mozilla, Firefox and profiles had not deleted with uninstall. I deleted the files, re-installed and now I'm fine and write for Firefox. So, if someone continues to have problems with a corrupted profile, suggest to uninstall and then deleting all records related to Firefox that are left behind.

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• Virtusa Tennis 4: Fatal error! Could not initialize the Games for Windows Live. This application will be closed.

  Original title: Virtusa Tennis 4

  Virtua Tennis 4 error message has

  "Fatal Error!"
  Could not initialize the Games for Windows Live. This application will be closed.

  Hi Ravikumar,

  Of Virtua Tennis are what version you try to work with?

  It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.

  See also:

  
  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»

  Virtua Tennis 4 - games for Windows LIVE
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238

  Hope this information helps. Response with status so that we can help you.

• application could not load the database

  I have a RoboHelp 9 project that I left open on my computer at night and microsoft updates ran causing my computer to restart.  When I try to open my project in RoboHelp 9, I get the following error:

  Open a project has been cancelled or the application could not load the database for 'C:\CODE\HELP\HELP. CPD»

  How can I fix the CPD file without restarting?

  Hello

  Just delete the CPD and re - open the project. When RoboHelp sees is missing, it will cook in the oven until a new use and then all should be well.

  See you soon... Rick

• BlackBerry Smartphones could not start the camera

  When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

  I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

  When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

  Thanks for any help.

  CB

  Hello

  It's worth a try:

  Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

  You will receive an email for verification.

  Remove the battery while the device is activated, replace after one minute,

  Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

• I recently moved notebook I have all my sequential codes. But when I try to install new downloaded it tells me that the installation program could not initialize the .dmg files. Even with the PES, PS and flash player. None of my installers will initialize

  Literally what the title above says. I just can't get anything to boot. CS4, CS5, PSE 8 PSE 9. It worked just the other day when this laptop had NOTHING on this subject. but now that I have all my files migrated absolutely nothing does not yet have flash player.

  Have you checked: error: "Setup cannot initialize ' | Windows

  Failed to initialize the installation of Adobe

  Mac - installer failed to initialize. (etc.) Help! I can't install the CS6 Master Collection Suite.

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  Setup could not initialize photoshop cc, Fixed - YouTube

  Concerning

  Stéphane

• Could not initialize the beak. a missing file?

  I have cs 5.5 but miss me my CD, so I tried to download it from the website of adobe, but for some reason, they wouldn't let me have when I put my serial number in.  I downloaded the demo of creative cloud so that I could work but now I tried to re-download my version and an error came say Setup could not initialize it may be due to a missing file...?

  Hello

  You can download it here: Download CS5.5 products

  Please see the instructions to extract the files and install your product.

  Alternatively, if you still have questions, you can download it here:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  These links may be useful if you need assistance:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Installation and launch log errors | CS5, CS5.5, CS6, CC

  Concerning

  Gilles marneffe

• JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0

  Hello, comrades Toshiba users,
  at first, I apologize if this question has already been answered, but I did not find the answer to my problem.

  One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers laptops are not my cup of tea, but the Qosmio him quite well served.
  We tried to upgrade the two hard drives of aging in his laptop. With considerable experience in replacing the readers of the laptop, I didn't expect no particular surprise, but I was wrong.

  We tried to replace the original disks
  Bay 1: 80 GB Fujitsu drive, System
  2: 80 GB Fujitsu drive, data, RAID off the coast of the Bay

  with the new
  Bay 1: 320 GB WD Scorpio
  WD Scorpio 2: 320 GB drive Bay.

  The BIOS of the G20 is v1.30, the latest version. It recognizes new readers-, but one of the new marking as 1RAID-0 disks fails. After trying to "initialize" the 320 GB drive in bay 1 as 1RAID-0, on the third page of the G20 of BIOS, there is a disk activity, but the drive remains in JBOD mode.

  Unable to mark the drive of 320 GB 1RAID-0, I am unable to use the 320 GB drive as a system disk.

  If the original system drive is cloned on a new 320 GB drive, that it does not start. Starting XP * begins * but subsequently fails with STOP 0x7B - in other words, the infamous blue screen INACCESSIBLE_BOOT_DEVICE when the Toshiba RAID driver is loaded during Windows startup.
  Plain vanilla CD, of course with slipstreamed windows installation driver Toshiba, impossible rest. Installing Windows don't "see" drive in Bay 2.

  When the drive system is put in the high Bay and G20 is started from it, Windows XP starts correctly. The drive in Bay 1 is accessable from Windows, however, remains offline in the RAID from Toshiba console. If the start player in Bay 2 is not an option, too.

  A similar problem, where the owner could not install a system of 200 GB drive is described here
  Link: http://tinyurl.com/38wokw
  The owner, however managed to install a 100 GB drive and we have resorted to 80 GB of disk as a system disk and the only player upgrade in Bay 2 to 320 GB.

  I understand what happens when the disk is 'initialized' in the BIOS. Only brands of BIOS of Toshiba disk 1RAID-0, and it breaks down on 320 GB drive. I will refrain from expressing my opinion on this practice.

  My question is - if it is possible, how * manually * mark the drive of 320 GB 1RAID-0?
  Using a hex editor, dd or something similar is no problem. A partial answer would also know the disc more large size which * can * be marked with success under the name of 1RAID-0 at BIOS G20.

  Thanks in advance.

  Hello

  I m not 100% sure, what could be wrong by presumably 320 HARD drive size might be too big!
  How about the 100 GB or 120 GB hard drives?

  I think you should consider it because usually most of the BIOS supports a HARD drive size limitation and therefore not all sizes are supported.

  But note; using the configuration of 1RAID-0 (striping), met by the operating system size is twice more only if the smaller of the two HARD drives in RAID configuration. Using RAID-0, all data on both disks will be lost, even if it is training of two disks fails.

• PS Installation: Engine command line Application error - could not sign the database < SID > PS user

  Hi all

  I have this problem, tried all means but couldn't solve it. I'm installing peoplesoft on my laptop. PS HCM 9.2 and peopletools 8.53.

  I followed all the procedures explained in the installation guide 8.53 (little missed - such as running app engine after creation of the database). I installed the application server, process schdueler, Web server for my instance and successfully connected to PIA. But I see errors from the compiler Peoplecode as first thing after the connection. Analyzed and found that this is due to lack of a few steps after the creation of the database such as the importation of PPLTLS84CUR, PPLTLS84CURDEL and race engines of demand and the additional dms scripts given in table of installation. (Please correct me if I'm wrong!)

  So I loaded PPLTLS84CUR, PPLTLS84CURDEL, PT84TBLSPC built the project, ran grant.dms and rarest dms as stated in the guide, started with the drivers of demand. I gave order below:

  ETAS - CD PSHCM CT - ORACLE - CO PS - CP PS R INSTALL - I UPGPT850PTFP

  It gives me below error:

  D:\PT8.53\bin\server\WINX86 > ETA - CD PSHCM - CT ORACLE - PS - CP PS r INSTALL CO

  HAVE UPGPT850PTFP

  Failure of LoadLibraryA() in pscompat.dll to 'PSORA64.dll': reason = 193

  Error sign on

  Type of database: 7 (ORACLE)

  The database name: PSHCM

  Name of the server:

  OperID: PS

  ConnectID: people

  The process instance: 0

  Reason: Could not sign database PSHCM with PS user

  But with the same credentials PS/PS given in psprcs.cfg I can start the process schduler, login in the application, or same PIA Designer.

  Please let me know if I'm missing something here. Even tried with SYSADM, but no luck.

  Thank you

  RK

  My bad. Actually I'm supposed to run record. I was running it from the server folder.

  It's real record where I suppose to run AE:

  D:\PT8.53\bin\client\winx86

  Thank you

  RK

• DBUA could not determine the database version. Upgrade from 10.2 to 11.2

  I am trying to improve my database of version 10.2 to 11R2. I have already installed the software in a new Oracle home directory, and now I use the upgrade database wizard according to the instructions. In the section select your database, when I hit the next button after selecting my database I get the error "DBUA could not determine database version. Make sure that the version of the database is supported for upgrade". I have already confirmed that the upgrade from 10.2 to 11R2 database is supported. Does anyone know how to fix this?
  
  Thank you

  Apply the 4547817 hotfix that upgrades your database to 10.2.0.2 and then you can directly go to 11.2.0.2

• Could not open the database

  Hi guru
  
  When I try to start the database. I am getting following error.

  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  918552576 bytes
  Fixed Size                  2025040 bytes
  Variable Size             327158192 bytes
  Database Buffers          583008256 bytes
  Redo Buffers                6361088 bytes
  Database mounted.
  ORA-01122: database file 15 failed verification check
  ORA-01110: data file 15: '/usr/local/app/oradata/VIRBANK/VIRBANK/HOREF01.dbf'
  ORA-01251: Unknown File Header Version read for file number 15

  Please help me to fix it.
  
  Thanks and greetings
  Saami

  ORA-09968: cannot lock file
  Linux-x86_64 Error: 11: Resource temporarily unavailable
  Additional information: 25565
  Sea 29 Dec 09:46:32 2010
  ORA-1102 marked during: ALTER DATABASE MOUNT...

  You did not display the last lines of alert.log.But Linux-x86_64 error: 11: Resource temporarily unavailable indicate that it is error related linux.

  SQL> alter database datafile '/usr/local/app/oradata/VIRBANK/VIRBANK/HOREF01.dbf'  offline drop;
  
  Database altered.
  
  SQL> alter database open;
  alter database open
  *
  ERROR at line 1:
  ORA-00603: ORACLE server session terminated by fatal error
  

  Thank you & best regards
  Saami

  Your session was killed as the BONE level. Then restart the computer and try again.

  Published by: Alex on December 29, 2010 02:24

• Error message could not initialize the canvas shared in Live mail

  When you use direct mail, error message.

  Failed to initialize the shared canvas: System. IO. FileNotFoundException

  Following a long text with strange error messages.

  It is having the effect that I am not able to create a live message.

  What should I do?

  IM using Windows Vista

  This was due to an update live essentials - if you have to live the next time that you update back to square 1 fundamental. I tried the system restore just prior to update and it was fixed up to reinstalled Windows update KB 2520039 - thank you