Could not import the Raw of Canon 5 d files

Similar Questions

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the RAW A7R2 files in Lightroom

  Having just downloaded and installed Lightroom 6 I still can't import RAW files from my A7R2 to Lightroom even though he has apparently taken over?

  Hi oliverd,.

  Please update the Lightroom version, that is to say Lightroom 6.1.1 and you would be able to import the images in Lr.

  Please let us know if it helps.

  Kind regards.

  Tanuj Sandal

• Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

  Hello! I have a problem after having upgraded to Windows 10. Please help me.

  I upgraded the operating system to Windows 10 by windows update.

  After that, I had some problems with language settings keyboard, so I have made a new account.

  Now in my PC, there is first CS6, CC, CC2014, CC2015.

  After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

  When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

  Import M2TS is possible in CC.

  I want to know how to fix it.

  Trash all your media cache. Rename the folder in the files, and then try again.

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• "Could not complete the command image size because that file name is not valid"

  Hello

  Please help me, when I try to resize the file psd his watch this message... .whats the matter?

  "Could not complete the command image size because that file name is not valid"

  Thank you!

  I had the same problem with you and tried to look around, but I solved it myself. One or two layers created by the insertion of your library which have been uploaded to the server cloud.

  When you open the file, you can see the warning as "recreate a link... blah blah your file" If reject you the message, you can still work on it, but you cannot resize, or drag all layers to other new file (tried).

  Everything you need that discovering the layers that are related to the server delegating and delete it. FACT.

• The RAW of Canon 7 d file not readable to LR 1.4 & CS3

  Just bought a Canon 7 d and have problem exporting file Raw LR 1.4 and CS3.

  Can anyone help? Thank you.

  Read this: could not open the file in Photoshop camera raw. Some of the links in this Technote are obsolete.

  Support new cameras in the old version of Lr and Ps to convert raw CR2 files to DNG using Adobe free DNG Converter (latest is 6.0 but 6.1 is just around the corner).

  In addition, the soon to be released Lr 3 is far superior to Lr 1.4 and version 3 support the 7 d (as with the current version of Lr 2.7). Only versions of Camera Raw available for Ps CS4 and CS5 supports the 7 d.

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• M Photoshop CS5 does not open the RAW of Canon 7 d Mark II files. CS6 will do that?

  My Photoshop CS5 does not open the RAW files from my Canon 7 d Mark II camera? CS6 them open?

  Hi terryi23618792,

  Yes, Terry, I think that your friend has not updated 6 CS PS to the latest version.

  • Open PS CS 6, click Help - updates and update PS CS 6
  • If this does not work, try direct link
    • Mac - Adobe - Photoshop: for Macintosh
    • Windows - Adobe - Photoshop: for Windows

  Concerning

  Rohit

• Could not open the Raw files of Mk II Canon 1DX in Lightroom 6 [was: Raw files]

  I gathered all my Canon 1DX MKII, I took some pictures on the new Cfast card, but 6 Lightroom couldn't import them because he couldn't read the raw files, I checked to see if there were updates and there is not. Is it because the camera is so new? Any help appreciated.

  You need to update to the latest version of LR, version 6.5, if the stand-alone version, or the 2015.5 for CC. What version 6 do you have?

• Could not import the XT10 (RAF) RAW files in Lightroom 5.7.1

  To the right,.

  
  I recently purchased Fuji XT10 camera (released in may 2015), after the shooting in RAW for a reason that the RAF files could not be imported to Lightroom 5. I updated my Lightroom 5 to the more up-to-date version 5.7.1. but still will not change a thing. I am reluctant to convert to DNG because Internet said RAF files retain better details/data to DNG.

  Someone will have a solution to this please, or if someone has the same problem?

  Thank you very much for your help!

  
  All the best,

  
  Josh

  Hello

  This camera (X-T-10, correct me if wrong) requires 6.1 Lightroom and Camera raw 9.1 devices supported by Camera Raw

  

  Please proceed to Lightroom 6 or DNG Converter allows you to convert your images to DNG

  Concerning

  ~ Assani

• Could not import the Nikon D800 with Lightroom 5.6 - files are not recognized by the raw format support in Lightroom

  I got CS3 installed and installed LR 5.5 and I tried to import my D800 NEF files and got the below error.

  I then installed 5.6 and tried again and got the same error

  I then uninstalled CS3 and LR and CS3, LR data directories and camera raw dir in the directory my profile app and reinstalled 5.6

  I still get the error. I just bought LR because I realized, that it supported the D800 from a 4.x version.

  Error:

  The files are not recognized by the raw format support in Lightroom

  JimHess wrote:

  You don't want to use Nikon Transfer! It corrupts files so that Lightroom can not read them. But here is a link to a utility that will repair the files. I have never used, only seen it recommended.

  Difficulty of the corrupted Nikon NEF Images

  In the future, I strongly suggest that you just use Lightroom to import your images. It works well. There is no need whatsoever to use Nikon Transfer. Is there any reason not to use.

  No problem with Nikon Transfer, providing you up-to-date on a regular basis. It is part of NikonViewNX2 which is regularly updated to include new Nikon cameras. Update of Nikon will notify you of new updates. I use to transfer files nave of cameras D70, D100, D200, D300, D3, D700, D7000, D7100, D800 and D800E as I had them for years. I like it because it of fast, allows me to include copyright data and profile data he copies, and it will also rename it if you wish. They are then ready to be imported into LR.

  My advice is NEVER use the import of LRs. IME process it has never worked well, even when the update.

  Bob Frost

• Could not open the RAW of Nikon d5500 has been added (.) NEF files) in Lightroom CC

  Hello

  I recently bought Adobe Lightroom CC and installed on my MacBook Pro OSX running 10.11. However, when I try to open the FIRST (.) NEF files) from my Nikon d5500 has been added I get the following message 'the following files were not imported because they could be readable.' as can be seen in the screenshot below:

  

  I am also under the latest version of Lightroom CC with Camera Raw 9.2 and I read that the Nikon d5500 has been added was supported Camera Raw 9.0

  

  The files open fine in CC Photoshop so I don't understand why they don't open in Lightroom CC.

  Someone can help or Lightroom CC not actually does support for the Nikon d5500 has been added RAW files?

  Your import asked Lightroom to copy pictures to a folder that does not have write permission. Determine which folder you want to copy the photos to (it's in the Destination of the import dialog section), then go to your operating system and make sure that this exact folder Lightroom has WRITE permission.

• Error importing the RAW of Canon T3i to LR2.7 files

  I tried to import RAW files taken with my new Canon T3i in LR 2.7 but I get an "unknown error". The files were proviously opened with the EOS editing software with the camera.

  Can you please specify? Is this one because I previously opened files in the Canon software or LR 2.7 does not support the new Canon T3i's? Files, taken with a Canon 5 d loded fine.

  Concerning

  To use this camera Raw files, you have two choices

  1. Upgrade to LR 3.4
  2. Use the free Adobe's DNG Converter to convert the files to DNG and then import them into LR 2.7

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.