Could not load down the windows update - 8007371b error code

Similar Questions

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• I can not load down the windows store and does not refresh

  Windows said it fixed the problem but it still won't be updated also I can not down load Windows store, HELP I have no nothing to computing

  Original title: windows update doesn't

  This problem can occur for several reasons such as interruption of the connection between the computer and the Windows Update service, the system files related to Windows Update do not work properly etc. This problem can also occur if the manifest of components (CBS)-based services is corrupted.

  Follow these methods:

  Method 1.

  
  

  I suggest you to temporarily disable any third-party antivirus installed on the computer and check the status of update installation.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2.

  
  

  Start the computer in a clean boot state, and check the status of update. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7, Windows 8

  : http://support.microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow the steps under "How to reset the computer to start as usual after a clean boot troubleshooting" in the article to start on normal startup.

  Method 3.

  
  

  You can reset Windows Update components, restart the computer and check the status of update installation.

  How to reset the Windows Update components?

  : http://support.microsoft.com/kb/971058/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Method 4.

  
  

  Rename the Software Distribution folder and verify the installation state of update.

  Follow the steps.

  (a) press "Windows + X" and click/click on "command prompt (Admin).

  (b) open the command prompt window, type these commands one by one, and press ENTER after each command.

  net stop wuauserv

  net stop cryptSvc

  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (d) wait for the course to complete.

  (e) close the command prompt, and then restart the computer.

  Now, go to Windows Update and try to install the updates. Check if it helps.

  Of reference articles.

  Upgrade to 8.1 Windows: FAQ

  : http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

  : http://support.microsoft.com/kb/957310/en-us

  Note: When you "Refresh" the applications provided with your PC or you installed on Windows Store will be reinstalled, however, all the apps that you have installed from other websites and the DVD needs be reinstalled as they will be deleted. You will find a list of applications on your desktop after you refresh your PC.

  Response with the State of the question and we will be happy to offer you our help.

• Could not load down the def. #1.101.352.0

  Not able to keep Windows Defender must do it again.  Receie 0x800106ba erro light often.   Today, KB915597/1.1.1.352.0 bat could be downloaded even if another def has been downloaded.  Do not appear in the history or as error.  Receive error 0x800106ba yesterday

  Hello

  You can try the steps suggested in the link given below.

  http://support.Microsoft.com/kb/931849

  Hope that information was useful

• How can I fix the Windows Update Ox80072EE2 error code?

  original title: How can I fix error code Ox80072EE2?

  Get the Ox80072EE2 error. Chose the express download then Windows Update checked for the latest updates, but the update did not follow and gave the error code Ox80072EE2. Tried several times. I have Windows XP Service Pack 3. Downloaded FixIt, but did not fix. Last successful update was 12/14/11. How can I fix this error code? Thanks a bunch for all help!

  If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

  To add the Windows Update Web sites to a firewall exceptions list

  • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

    • >

  If the problem persists after these steps, see this

  http://support.Microsoft.com/?kbid=836941>

  UTC/GMT is 03:26 on Tuesday, January 10, 2012

• Difficulty for the Windows Update 80070002 error code

  Can someone help with the 80070002 error?

  I had Windows Update set to auto, and one day he's come until he could not update and gave the above error code.

  I tried all the answers currently on this forum (and others) without success.  I tried;

  1. Deleting files from the C:\Windows\SoftwareDistribution folder - but it has nothing
  2. Opening of cmd, but when I type "ren C:\Windows\SoftwareDistribution SDTemp" tells me access denied.
  3. I downloaded system preparation tool, but it is too irrelevant.
  I am too short as an administrator.  Do not understand why these things do not work.  Help someone?
  Thnaks in advance.

  andrewjhogg,
  Take a look at this article as it covers the error code that you found.  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not load down the xi adobe with windows 8

  down load does not work with windows 8 only get an open or save on any track to download exe

  Try the complete drive offline Installer

  http://get.Adobe.com/reader/Enterprise/

• Could not load down the updates of security forJscript 5.8

  Can not download updates of security for Jscript 5.0 and Windows XP (KB956844)

  Hello Christopher Louis,.

  Welcome to the Microsoft Answers Forum!

  What is the error message you get when the update doesn't install?

  You can try to download the update manually and then install it.
  Here is a link to download and install the update manually:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8523d5be-88a2-4124-9b02-660f612e2a12&displaylang=en

  I hope this information helps.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• 8024402C in the window update 8 error recovery and cant open in apps store...

  8024402C in the window update 8 error recovery and cant open in apps store...

  I got this error for 2 months, even after trying thousands of methods... including registry too
  then I realized that the problem is in my cuz IPS (Internet Service Provider), it could not find the server
  configure your own server-to-server of google
  for example, 8.8.8.8

  go to RUN
  Enter "ncpa.cpl".

  Right-click on the network you use for internet
  Go to the properties
  do not click on setting ipv4
  again go in properties
  Click "use the following DNS server addresses.
  Enter the preferred DNS server

  8.8.8.8

  than others

  8.8.4.4

  YOU'RE DONE!

• Windows Update failed, error code 646. Microsoft fix - it has not corrected, error code 0 x 80040154

  Update for microsoft works failed, error code 646.  I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high

  See: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/error-code-80040154-windows-vista-home/5088695c-c534-41c5-bdac-518713506875

• 1 1 Windows Update 80070002 error code

  1.	1 Windows Update 80070002 error code
  2.	2 Windows Update error 80072efd
  3.	3 Windows Update, error 8024402C
  4.	4 Windows Update 80070103 error code
  5.	5 Windows Update error 80070643
  6.	6 problems with installing updates
  7.	Update Windows 7 error 80072f8f
  8.	8 Windows Update error 80246007
  9.	9 error code Windows Update 80070422, 80244019, or 8DDD0018
  10.	10 Windows Update error 80070003
  11.	Windows Update error 80072ee2 11
  12.	12 error code Windows Update 8024001
  13.	13 Windows Update error 80200010
  14.	14 Windows Update error 80246005
  15.	15 Windows Update error 80246008
  16.	16 Windows Update error 800f020b
  17.	Windows Update error 800f0826 17
  18.	18 Windows Update error 80244022

  Hello

  1 did you do any hardware changes or software on your computer before this issue?

  2. Since when you are facing this problem?

  I suggest to try the steps mentioned in the link below and check if it can help

  Method 1: Try to perform the clean boot and then try to update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Make sure that return you the computer to a normal startup mode once it's done.

  Method 2: Try to reset components to update Windows from the following link: http://support.microsoft.com/kb/971058

  Method 3: Also I suggest you to install the update from the link system tool below http://support.microsoft.com/kb/947821

  More information: Try following the steps in the link below

  http://support.Microsoft.com/kb/836941

  Hope this information is useful.

• Windows 8 will not load after the recent updates. Flashing black screen...

  Last night (14/02/2013), I installed a set of 11 updates (one option, else important) and after restarting my machine after startup logo, the screen of my computer just started flashing from black to grey (when it is grey, I could see my cursor, could move it, but could not do anything else)... He did this for almost an hour until I finally got to load the system restore my Windows 8 Pro x 64 purchased disc.

  Not only has this happened to my desktop pc (a HP Pavilion p6620f), but also exactly the same thing happened on my wife's cell phone when I have updated with the same updates later last night. His laptop computer to a laptop HP Pavilion g7-1310us. of course, I had to again do a restore of the system on lappy.
  *********************************************************
  The updates I had downloaded for both computers on 14/02/2013 are as follows:
  Important:
  (1) cumulative Security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2792100)
  (2) security Update for Internet Explorer 10 for Windows 8 for x 64 systems (KB2797052)
  (3) security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789650)
  (4) security Update for Microsoft .NET Framework 4.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2789649)
  (5) security Update for Windows 8 for x 64 systems (KB2778344)
  Update security 6) for Windows 8 for x 64 systems (KB2790655)
  (7) security Update for Windows 8 for x 64 systems (KB2799494)
  (8) update for Internet Explorer for Flash for Windows for x 64 systems 8 player (KB2805940)
  (9) update for Windows 8 for x 64 systems (KB2795944)
  (10) Windows removal tool malware for Windows 8 and Windows Server 2012 x 64-based Systems - February 2013 (KB890830)
  Optional:
  (11) update for Windows 8 for x 64 systems (KB2793210)
  *********************************************************
  I would really like someone to be able to help me with this. I bought Windows 8 Pro to my laptop from my wife and also 3 other copies for my father-brother machines... and now, I had to disable the Windows updates for each of them because of this!
  All our computers are HP, maybe that has something to do with it? I do not know. Or maybe it had something to do with the fact that machines did not originally come with pre-installed Win8 (as I said above, I bought the discs retail - 5 of them).
  I really enjoy using Windows 8 and won't go down to Win7 after all my work and spent $$$.
  PLEASE ANSWER THIS QUESTION AS SOON AS POSSIBLE!

  Update:

  With the help of my friend and colleague some at CreativX.net, Greg (gsw953), which has tested this situation on a machine of his, we think we have found what was causing the problem:
  All my machines are patched (I used UltraUXThemePatcher to patch mine) to run custom themes, 3 rd-party... Of course, the patcher (all of them, not just the one I use) modifies several system files (for example the shell32.dll file and a few others), what makes your system able to run themes not digitally signed by Microsoft. This seems to be the rub.
  The way I solved this Aalders - UN-patch my system. Most patchers have an uninstall feature that uninstalls the patcher and adds by default, system files not patches in your system from backups that patch is when you have it installed. Once I did, I got all the updates, restarted, then re-patched my system and everything was fine.
  I have the feeling that this same routine can must be made (UN-patch, get updates, re-patch) whenever MS publishes major updates of Win8... It is prudent to disable automatic updates. Better to have Windows Update notifies you and lets you decide if-or-not to install... and also it's a good idea to READ THE DESCRIPTIONS OF THE UPDATES to see what they are - maybe even search them individually on the ' Net before you allow it to install.
  MS has a long history of updates that fub a system patched... it's as if they don't want look us cool themes. they want that we have all the same, default * that they provide only. Shame on them.
  Once again, in the end, the fix: Nations United-PATCH your sytem... get updates... and then re-PATCH. Worked for me. Touch wood...

• Default brushes will not load since the last update: How can I solve this please?

  Everytime I open Photoshop I get the message: "could not load the default brushes because the file is not compatible with this version of Photoshop. It became a problem because I downloaded the latest updates for the package of the Photo. Please can someone advise me on how to solve this problem.

  Good, great to hear that solved your problem. Please check back...

  Benjamin

  PS If you are satisfied with the answer, remember to mark (solving answer) correct. This marks the problem solved and will help others to find solutions to similar problems. Note: you must be logged in to the forum.

• How to upgrade Vista to Win 7, when the upgrade wizard does not load in the Windows Anytime Upgrade window.

  How to upgrade Vista to Win 7, when nothing is loading in the Windows Anytime Upgrade window.

  After the purchase of a new license to upgrade from Vista to Windows 7, after the opening of any time upgrade window, nothing happens. He sends you open app Windows Anytime Upgrade and it suppose to open the wizard to enter the new product key, but Wizard does not open, and there is no option under app anytime upgrade win to open the wizard. There was no link to download the upgrade, follow the instructions to upgrade through win app anytime upgrade.

  The Windows Anytime Upgrade was not designed to be upgraded to Windows 7.  It can only upgrade from one edition of Windows Vista to another edition of Windows Vista.  In order to upgrade to Windows 7, you must follow the upgrade procedure described here: upgrade Windows Vista to Windows 7