Could not load the 3.6 - disk image could not mount - reason: corrupted image
Tried to load 3.6 and get the msg: disk image could not climb. Reason: image corrupt.
This has happened
Each time Firefox opened
Versions of Firefox 3.0 + need Mac OS x 10.4 or higher.
What version do you have?
Tags: Firefox
Similar Questions
-
Failed to create the system cd disk image backup
Original title: difference between auomatic backups & do your own backups?
Hi you all,.
I'm a bit confused about backups, I just got my new mohterboard HPp6320y/win7/improved / 2.7Gz cpu, 64-bit, 8 G - ram. HP offers to immediately burn a recovery-re-boot disk, which I did. Then they strongly suggest to copy a restore disc fictitious system using an external hardrive or external storage such as cd - rw disks, I don't understand if I can burn a shadow of system using my existing internal drive or some other form of storage like USB drives provided that they have sufficient capacity.So far, so good, but when I first tried to burn a shadow/system using my existing built in internal disk drive, the only choice in the context menu after clicking "burn the backup of the system" was my internal hardrvie. He did not get a disk, so I dropped back until I could understand if I was doing something wrong and fix itI know that my automatic HP backup restore points are made on a regular basis with or without me having to ask, once partition it the space reserved for different backups with full capacity, my system removes the oldest to give room for the new, correct?I also know that the purpose of having a shadow system is if your hard drive goes wrong, you can restore your entire OS & the personal data to a new disk, so store in a partition of your works currently hardrive would make no sense if it goes wrong, correct?Then why, my system will not burn a shadow on a freshly unpacked well-known R/W disk? (I have 10 of them I bought still packed)Do I need to use a drive external remote disc?Also, I have a factory built-in removable Pocket media player provided out of my older HPa610n and it holds 160Gs, I have the appropriate connection and it appears therefore as a storage device when I turn on my new current HP. However, when I click Backup a shadow system, it shows that my cd player internal existing as an option where I'm supposed to store my shadow of system. Yet they claim that I can use a USB device, provided that it can contain enough storage, I am really confused and feel a migraine coming!
Help! Please... sincerely, boulonmanHi Alan,
Welcome to the Microsoft community!
You cannot create a system image backup using the disk drive.
To help you better, we need more information.
You use CDs or DVDs?
If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.
-
remove the external hard disk image
There are on my external hard drive that I would use in a project I am working on photos. I can find information on how to put photos on an external hard drive, but nothing about deleting the photos in my external hard drive to place and use somewhere else IE in my photo gallery to use for my project.
Can do you and if so someone can tell me an easy way to do it.
Help is highly appreciated. Thank you.
You can copy photos (data files) since the main external hard drive in a folder on your hard drive. See here
-
After you download several updated files (.dmg) - none will open more:
for example;
How can I solve this problem?
BR
-Larry
I do not know the invalid argument, but he saved a "fate worse than death" regarding CleanMyMac3. Who has studied malware here and does more harm than good to the iPhoto/Photos and systems libraries.
Do not launch ever 'cleaning' or 'optimize' of the types of software.
Regarding the Génitech disk image you tried to download again?
-
How prevents you making hard disk image.
I want to avoid making the hard drive disk image software.i image belongs to the marketing automation industry retail and have more then 1000 guests with the same equipment.
some of our former employer do drive hard picture one of our client and software copy of sale to others.is it is a software or security with XP to stop this kind of piracy.
concerning
Syed Hussain YesHi sabsarh,
If the hardware supports it, a basic input/output system (BIOS) password can be defined by preventing changes to the boot device prevents booting from removable media. Combined with physical security locks to prevent the hardware changes, it should help to prevent unauthorized access.
You may need to contact the manufacturer or refer to the manual for assistance with the BIOS settings.
Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
You can contact Microsoft Support for assistance on the issue of piracy.
-
The hard drive failed on my HP laptop. I bought a new hard drive (not HP) and loaded the HP recovery disks, but a screen will appear that says it is not compatible. Can I use this new hard drive, or should I buy a hard drive for HP?
I looked at a few tech forums and from what I can tell, HP crashes their system you can't use hard disks of third parties. To make a third hard drive to work (depending on the online forums), you will need to bring a technician certified in HP in order to run a utility of DMI (?) and "tattoo" the hard drive for HP use (estimated at close to $45).I can't find a technician certified in HP in my area and Geek Squad said that they can do it more... my laptop is now an expensive paper weight, or there at - it another option (short of spending hundreds of dollars on the purchase of a new Vista + MS Office license)?Hello
posters have reported problems with the use of a replacement hard drive not HP, etc.
as you say you know the answer to your problem buy a new hard drive from HP and then reinstall using their recovery disks
If you have problems with the HP recovery process, contact the manufacturer
It's their recovery process not microsofts
HP support
http://WWW8.HP.com/us/en/contact-HP/contact.html
HP support forums
-
I use the flash cs5 and air2.5 tools
I just want to load the SD card as image or xml files
and I have added the ok of permission, but still cannot load the png successfully
I load the path as this:/mnt/sdcard/tipsdoo/aa.png
someone did it?
Thank you
Sorry, my English is not very well
Hello
Use it instead:
import flash.filesystem.File;
var file:File = File.documentsDirectory.resolvePath("tipsdoo/aa.png");
If (file.exists) {}
trace (file. (URL);
loader = new Loader();
Loader.Load (new URLRequest (file.url));
}
-
Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:
Backup failed: Time Machine could not complete the backup of... Airport Time Capsule. The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)). Last successful backup: yesterday at 12:17
I can see the airport and the data file in my network.
I immediately did a full time Machine backup on a USB key and it disconnected from my system.
I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light. I'm restarting Time Machine backup to the airport.
I need to replace the airport? The appliance starts to fail? Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this. Reconstruction will take about four hours with no guarantee that it will work.
Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html
-
Hey get this error message
The backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).
In the context of what?
-
Hello
I have a 27-inch iMac late 2013, 3.2 Ghz intel Core i5, 8 GB 1600 Mhz DDR3. I get the tracking error when you try to save it on my time capsule.
The backup disk image ' / Volumes/Data/iMac.sparsebundle ' could not be found (error (null))
I have another iMac and Mac Pro that save in the capsule of time without any problem.
Can anyone help?
Thank you
You try Time Capsule stop and unplug for 1 minute. Then reset the SMC on the iMac by Intel iMac LANDAU and SMC will reset and restart the iMac and restart the TC and retest Time Machine.
-
I downloaded the software, but he says "the following disk images could not be opened - image not recognized."
Please see:
Re: Problems with CS6 Master Collection disk image
I hope this helps.
Concerning
Megha Rawat
-
Could not load the virtual disk manager
I am operating Windows 7 SP1. At one point, I lost the ability to use the virtual disk manager. I've scoured the web and many forums to find answers and none worked. I tried to repair windows, run sfc/scannow, etc stopping before you reinstall windows, which some people have suggested that I have many software loaded and am not sure that this will not happen again once I loaded the software again.
It is a "backdoor" way to force launch disk management? My need is to change disks on some of the hardware devices, such as DVD players and card readers.
Would appreciate any advice or suggestions... Thanks in advance.
Hello
Thanks for the reply.
Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.
Thank you.
-
Could not load the dreamweaver because it gives the dreamweaver.exe - bad image error message
I have been using Adobe Dreamweaver 2015 for a few weeks, but all of a sudden, I can't load the software because it gives an error message with "dreamweaver.exe - bad image".
How can I fix?
The error points to a library file corrupted, usually ATMLIB.dll.
This could have been caused by the malware, therefore, it is best to run a program anti-malware first.
After that, use the Adobe Creative cloud cleaning tool to solve installation problems
-
Could not load the TIF images in Photoshop.
CS4 (11.0.2) and Windows 7 Home Edition.
Have developed a problem when trying to load TIF images in Photoshop. I have a large number of images archived on a dozen years or more. At this point, there are some files that are the problem. Now, all of these files have been published and stored using the versions of Photoshop in the period of full time. Files are always saved without compression. Tried to load Photoshop and clicking on the file in a list of files. Photoshop just crashes and I get the message of the program does not. I can take these same files and load them into ROXIO photo without problem Editor. Stranger still is if I simply load the file in the editor of ROXIO then "save under" in the same folder (overwrite) the file can then be brought into Photoshop without problem! Any ideas?
Joe sent me two TIFF files with which we can try to reproduce the problem (cute baby, Joe!).
I had no problem to open them in Photoshop CS4 or CS5. The only special thing I see on these files is that they are labeled with a rare color profile: Nikon sRGB 4.0.0.3001 (8bpc)
What are your colors, Joe management settings?
Here are the files if others would like to try:
http://Noel.ProDigitalSoftware.com/ForumPosts/ijc5112-000-p037e01b.tif
http://Noel.ProDigitalSoftware.com/ForumPosts/ijc5120-002-p009a.tif
-Christmas
-
I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loudI know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?
I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path. *
* Use .symfix to get the debugger to choose a symbol path. *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
Computer name:
Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
System Uptime: 3 days 5:21:50.657
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
................................................................
................................................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}
The kernel symbols are FALSE. Correct symbols to do the analysis.
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
Probably caused by: ntoskrnl.exe (nt + e95c)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: fffffa7fffffffea, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002c5a95c, address memoryDebugging information:
------------------The kernel symbols are FALSE. Correct symbols to do the analysis.
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.MODULE_NAME: nt
FAULTING_MODULE: fffff80002c4c000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f
READ_ADDRESS: could not get nt! MmSpecialPoolStart
Unable to get nt! MmSpecialPoolEnd
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
fffffa7fffffffeaCURRENT_IRQL: 0
FAULTING_IP:
NT + e95c
fffff800'02c5a95c? ???CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0
STACK_TEXT:
fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2STACK_COMMAND: .bugcheck; Ko
FOLLOWUP_IP:
NT + e95c
fffff800'02c5a95c? ???SYMBOL_NAME: nt + e95c
FOLLOWUP_NAME: MachineOwner
Nom_image: ntoskrnl.exe
BUCKET_ID: WRONG_SYMBOLS
Follow-up: MachineOwner
---------I'm grateful for any help I can get in that case.
My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU
Postal salvation,
I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.
Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).
Here's how to new:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.
virus/malware programs:
Symantec:
Works in Safe Mode and free:
_ http://security.symantec.com/sscv6/WelcomePage.asp
Trend Micro
_ http://housecall.trendmicro.com/
Ad-ware/spyware:
Ad-aware
Spybot Search and Destroy
http://www.safer-networking.org/
* It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.
See you soon,.
Steve <> Microsoft Partner
Maybe you are looking for
-
Troble w / facility updates
I update my computer very regularly, but there is article 1, which will not be installed. Its recommended published on 25/11/2008, the name is updated for Windows Vista (KB959130). I try several time to install. Can someone help me with this problem.
-
How to burn pictures on a DVD?
Excuse my ignorance, but how do you go?
-
Need to reinstall Windows XP but have the installation media
Windows XP Home Edition disk was somehow scratched & I need to get another copy of charge my son's computer. I have a license key valid (deleted product key) for a Dell computer. Just re install Windows XP home on the new hard drive the original cr
-
Somehow, I have the files located in different folders. Want to get rid of one and keep the other, but when I remove one, the other is also deleted. Tried to change the file name on one, but the other gets automatically changed too. Tried to move
-
I'm the Manager of the team. We bought three licenses. I downloaded everything and when you try to open Adobe InDesign CC 2015 on my machine I received this message: I was connected when I received this message."No subscription found.We could not fin