Could not load the environment variable for websphere mq client

Similar Questions

• Could not load the library dill for new software and hardware.

  That's what my software told that goes with my own material. I can't it ends to the bottom of the load.  I close my antivirus to down load.    (deleted) Call me if you want.   Could not load dill liibrary C:\Docume~1\user\Local~\1temp\GLF6.tmp can I use my driver recovery cd and not lose the documents on my computer?  What can I do to get my new software and hardware to work?

  Hi RonaldAndis,

  ·         You try to install a software?

  ·         What software are you trying to install?

  ·         Is it a downloaded software or you have an installation CD?

  Method 1: If this is a downloaded software, then try to download it again and see if it helps.

  Method 2: Search for damage if you try to install using a disc.

  Method 3: Place the computer in a clean boot state to install the program.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup, once the troubleshooting completed.

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• Windows could not load the backup selected for the following reasons

  I'm having a problem, try to restore a backup set

  A failure of HD I had to wipe my computer.

  Now I'm tyring to restore and it doesn't give me the error on the title of this thread with 0x810000E3 error code

  I have windows vista Home premium

  I can see the ZIP files on my external USB hard drive, but when I double click using windows compress or winzip files are not open.

  I tried the restore (basic and advanced) the windows backup and restore program nothing works.

  I have crucial information on this drive I need to recover.

  Any information is greatly appreciated.

  Thank you

  I could not find any information on this specific error code - so it will have to address the situation in a generic way.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not load the FaceBook Application for a 9000 "BOLD" of blackBerry Smartphones

  It's my third BlackBerry 9000 "BOLD", and the first time I had problems downloading the FB app. It says "Sorry, your device does not the requirements of systems that are needed to support FB." I tried referral service book and removing battery - who did nothing. My "BOLD" is v 4.6.303, platform 4.0.0.248, application memory 61.0 MB, memory 859,2 MB (823,6 MB free space).

  Any suggestion will be highly appreciated!

  The latest version of facebook for BlackBerry is 2.0.  It was designed to run on phones with OS 5 or newer.  Your phone is running OS 4.6 which may not work properly with the latest version of facebook.

  What you need to do is a search for facebook 1.9, which will work properly on your phone.

  I hope that helps you.

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• YES-67075: could not load the patch object & YES - 67073:OPatch failed: PatchObject constructor

  Hi Experts,

  I am really evil with Opatch following error... any suggestions would be very appreciated.  ! Thank you!

  am version of database upgrade R12.1.1 Vision of 11.1.0.7 for 11 GR 2 following this Doc.
  Doc-ID 1585578.1 (Interoperability notes Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) )

  and I checked this as understanding OPatch tool and patch [1451669.1 ID]!

  After you apply the patches on apps and db level pre-installation and Installation of 11.2.0.3 home.

  When I tried to apply the Patch getting following error. Also, I can't apply any Opatch or Patch DB with each Patch am getting the same error

  [oracle@ebs 14229857] $ /11.2.0.3/OPatch/opatch apply
  Setup Oracle interim Patch version 11.2.0.3.6
  Copyright (c) 2013, Oracle Corporation.  All rights reserved.
  
  
  Oracle homepage: /11.2.0.3
  Inventory Center: / oracle/oraInventory
  from: /11.2.0.3/oraInst.loc
  OPatch version: 11.2.0.3.6
  YES version: 11.2.0.3.0
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  
  Could not load the patch object.  Possible causes are:
  The specified path is not an intermediary shiphome Patch
  Metadata files are missing in the region of patch
  Patch location = / oracle/14229857
  Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  
  OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  
  OPatch failed with the error code 73
  
  

  even if the patch 6880880 is successfully applied to the updated version OPtach also I set the Path variable for export PATH = $ORACLE_HOME/OPatch: $PATH

  There is no problem with the permissions on files and directories. as I have cross checked.

  /oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch lsinventory-details
  Setup Oracle interim Patch version 11.2.0.3.6
  Copyright (c) 2013, Oracle Corporation.  All rights reserved.

  
  Oracle homepage: /11.2.0.3
  Inventory Center: / oracle/oraInventory
  from: /11.2.0.3/oraInst.loc
  OPatch version: 11.2.0.3.6
  YES version: 11.2.0.3.0
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_19-26-02PM_1.log

  Location of the output file Lsinventory: /11.2.0.3/cfgtoollogs/opatch/lsinv/lsinventory2014-05-08_19-26-02PM.txt

  --------------------------------------------------------------------------------
  Installed products of higher level (2):

  Oracle Database 11g 11.2.0.3.0
  Oracle Database 11 g examples 11.2.0.3.0
  There are 2 product (s) installed in the home of Oracle.

  
  Here are the details of Patch Log!
  
  YES location: /11.2.0.3/oui
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  [May 8, 2014 18:58:59]     History of patch file: /11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
  [May 8, 2014 18:58:59]     From ApplySession Thu May 08 18:58:59 IST 2014
  [May 8, 2014 18:58:59]     Starting apply Session at Thu May 08 18:58:59 IST 2014
  [May 8, 2014 18:58:59]     YES-67075: cannot load the patch object.  Possible causes are:
  The specified path is not an intermediary shiphome Patch
  Metadata files are missing in the region of patch
  Patch location = / oracle/14229857
  Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  [May 8, 2014 18:58:59]     OPatch will clean the files 'restore.sh, make.txt' and "backup cars, scratch," directories.
  You will always be able to restore patches after this cleaning.
  Do you want? [y | n]
  [May 8, 2014 18:59:02]     Y (auto-répondu by - silence)
  [May 8, 2014 18:59:02]     The user responded with: Y
  [May 8, 2014 18:59:02]     Size of the directory "/11.2.0.3/.patch_storage"before cleaning is 269296 bytes. "
  [May 8, 2014 18:59:02]     Size of the directory "/11.2.0.3/.patch_storage"after the cleaning is 269296 bytes. "
  [May 8, 2014 18:59:02]     UtilSession: Save for the restoration area was cleaned. For a complete list of files/directories
  removed, please see the log file.
  [May 8, 2014 18:59:02]     YES - 67073:OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  [May 8, 2014 18:59:02]     YES - 67035:System is intact, OPatch will not restore the system
  [May 8, 2014 18:59:02]     Finishing ApplySession at Fri May 08 18:59:02 IST 2014
  [May 8, 2014 18:59:02]     Total time spent waiting for user input is 0 seconds.  End at Thu May 08 18:59:02 IST 2014
  [May 8, 2014 18:59:02]     Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  [May 8, 2014 18:59:02]     Description of the battery: java.lang.RuntimeException: PatchObject manufacturer: Input file "/ oracle/14229857/etc/config/actions" or "/ oracle/14229857/etc/config/inventory" does not exist.
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObject.createPatchObject(PatchObject.java:2433)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObject. < init > (PatchObject.java:2000)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:2188)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1553)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5850)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2060)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.OPatch.main(OPatch.java:614)
  ~

  Thank you

  Priya

  Priya,

  You try to apply (Patch 14229857)? If so, it's for Exadata then is it applicable?

  11.2.0.3 patch # is 10404530

  11 GR 2 11.2.0.3 database certified with E-Business Suite

  https://blogs.Oracle.com/stevenChan/entry/11gr2_11_2_0_3

  Please note that 11.2.0.4 is the Group of hotfixes later certified 11 GR 2.

  11.2.0.4 database certified with E-Business Suite

  https://blogs.Oracle.com/stevenChan/entry/11_2_0_4_database

  Thank you

  Hussein

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Could not load the dll target, the error code 126

  A "runner error" box keeps popping up saying "could not load the dll target, error 126" code.  This appears at all different times, even when I'm not using the computer.  I don't know why it gives me this error or how I can get rid of him for good.

  Hello Tracy,.

  Try to configure your system to boot into boot mode (Ref: http://support.microsoft.com/kb/310353) will help you identify the problem.

  I hope this helps.

• Could not load the profile user (XP OS) and lost files

  Hello

  I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded.  I am currently in the temporary profile that was created automatically by the system for this profile.  It seems that files on another profile missing now and I can't get back my original profile.  This profile has been my administrator profile that I created to replace the supplied profile admin system.

  I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.

  I've seen a few comments on the forums, but they are especially for non XP OS.  Is it possible to retrieve the profile and files.

  Please notify.

  Thank you for your time.

  Recovering from a corrupted or damaged user profile is a relatively simple operation.  Follow the instructions in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW