Could not locate MS Works to create a word document

Similar Questions

• Could not submit the working ' PSP: create Distribution lines.

  Hello
  
  I am new to the distribution of work and when I try to send the job ' PSP: create Distribution lines ", I can't pass any value for the parameter"Source Type"- there not all valid values (it's a valid table valueset).
  
  Before attempting to run this job, I ran the ' PSP: import pay Transactions of MFC.
  
  Could someone please guide me if I am away no matter what stage between the two?
  
  Please advice.
  
  Thank you
  Sagar

  Thread double (please post only once).

  Could not submit the working ' PSP: create Distribution lines.
  Re: Can not submit the working ' PSP: create Distribution lines.

  Thank you
  Hussein

• Error 1606 could not locate nework location % APPDATA%\.

  Error 1606 could not locate the location of the network % APPDATA%\.  I get this message every time I try to download adobe reader 9.3.3 or 10.1

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

  Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

  Hello:

  See run the resolutions listed in the link below the job for you.

  https://support.Microsoft.com/en-us/KB/314060

  #3 or #5 usually work.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

  I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java?  I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability.  I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory.  Help, please!

  original title: uninstall older versions of Java
  Hello
   
  Method 1:
  Check out the link and follow the steps.
   
  After uninstalling Java, how to remove its entry in the windows?
  http://www.Java.com/en/download/help/regkey_addremove.XML
   
  Method 2:
   
  See the article and follow the steps.
   
  Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '
  http://support.Microsoft.com/kb/315352
   
   
  Method 3:
  Check out the link and follow the steps.
  
  Download errors: 1305, 2755, 1606, etc..
  http://www.Java.com/en/download/help/error_installshield.XML
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• ASA-6-110003: routing could not locate the next hop

  Hello

  I have a problem with our ASA firewall. I have a firewall that's inside, outside and DMZ interface. I have VPN clients that connect correctly and can access the internal network. However, for profiles that I have configured to connect via VPN to the DMZ network fails with the following messages.

  ASA-6-110003: routing could not locate the next hop

  &

  ASA-6-302014: disassembly of the TCP connection... No contiguity valid

  I have connections in the DMZ, but aren't VPN via internal and external interfaces without problem.

  The routing table has a route to this network and I have a nat in place - I'm quite puzzled by the present.

  Thank you

  Ed

  Hello Ed,

  Well, Nat seems good but you can do the following for me please:

  network of the DMZ_subnet object

  10.1.213.0 subnet 255.255.255.0

  network of the VPN_Subnet object

  subnet 255.255.x.x x.x.x.x

  public static DMZ_subnet DMZ_subnet destination NAT source (dmz - 2 outside) public static VPN_Subnet VPN_Subnet

  Kind regards

  Julio

• I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  What is "Adobe XI" - Reader or Acrobat?

  But, "Save as Adobe PDF" is a function of Word, independent of this Adobe software, you have installed.

  

• Keep getting these messages every time I connect to on___BHO. DLL need to reinstall. Could not locate the ie3sh.exe component. ReadyBoost stopped working. Host process for windows Services has stopped working and closed?

  I get the messages above, Idon't 't know what to do. I ran my anti-virus program and clear at all. Very confused, help appreciated.

  Hello

  You have this toolbar? Some programs you loaded probably included such as the MyTatoo
  FaceBook program.

  Fast Browser Search? -Check this box to get the uninstall instructions.
  http://www.fastbrowsersearch.com/FBS_Toolbar/help/helpUninstalling.aspx

  Look for Search Guard Plus (my web tattoo) and Search Guard Plus Updater(my web tattoo) in Control Panel-
  Programs and uninstall then with FastBrowserSearch.

  A good program to use to uninstall those is Revo Uninstaller, because it will help emlinate each of them.

  Revo Uninstaller - free
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  ---------------------------------------------

  After the foregoing:

  These and we may have to do even more if this does not prevent messages (they
  are boring and he had to be stopped, however, they are not dangerous).

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close IE

  Now download and run this program:
  
  BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Save this file in the folder that you want to keep it because it is not actually installed. Is a standalone.
  You can also download run from the download folder or copy or move it to another folder of
  your choice.

  Download - SAVE - go to where you put it-right on - click RUN AS ADUMIM

  Look for any reference to a BHO object you do not recognize or work in it. You can remove
  everything you want them to be addons and you can always add them in the necessary cases.

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 10 could not locate the boot camp partition

  I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD.  With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions.  I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document.  The partition is then renamed to 'Drive Partition 0 5'.  When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one.  For more information, see the Setup logs files'.  The Windows Installer does not progress.  I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.

  Any advice on how to install Windows would be greatly appreciated.  Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10.  I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.

  Please, disconnect all external storage devices to your iMac and run the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and now try BC Assistant.

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• the procedure entry point ntalpcsendwaitreceiveport could not located in ntdll.dll error whiel opening programs

  original title: ntdll.dll
  When I run no matter what program to progdvb ouvertede find this problom
  the procedure entry point ntalpcsendwaitreceiveport could not be located in the dynamic link library ntdll.dll

  Hello

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Could not locate the trash on laptop

  I sent many fake pictures and files in the trash. I tried to recover a file deleted last night and could not find the Recycle Bin on my laptop. Usually, on my previous dell computers, it's a shortcut icon, not on this one! Can someone help me locate it? Thank you

  Right-click on the desktop
  Select Customize
  In the left pane, select the Change desktop icons
  Select Trash Microsoft Security MVP, 2004-2009

• How can I fix an error that is 64 ordinal could not located in the dynamic link for f1 library xlive.dll 2011 pc game

  I want to ask that how can I correct the ordinal 64 error could not be located in the xlive.dll links Library dynamic for the performance of a pc game f1 2011 - as I'm runing win 7 64 bit

  Hello
  1. When you receive this error message?
  2. is the specific issue of the F1 2011 game?
  3. have you made changes on the computer before this problem?
  4. How do you try to play the game? Using Xbox or Windows 7 computer?

  If the F1 2011 game-specific problem then contact manufacturer:
  http://www.Formula1-game.com/UK/
   
  If you try to play the game F1 2011 with Xbox. Contact the Xbox team for assistance.
  http://support.Xbox.com/en-us/
  
  Hope the above information is helpful.