Satellite P200-1 to 4 does nothing on AC/battery

Hi all

I have a problem with my Satellite P200-1 to 4.
When I connect the battery to the power adapter, the laptop does nothing (no lights, no sounds)

When I dosconnect the battery and leave the AC in place, the system starts normally.

I tried another battery of a friends P200-1 has 4 (that works), but in my laptop, nothing is left.

It seems therefore that I can use the laptop on the sector now.
One of you had a simular problem or have a solution for me?

Thank you very much!

What happens when you start Notepad with ca only, but when loading the battery operating system is placed in the laptop again? Battery is correctly recognized?

Tags: Toshiba

Similar Questions

  • Satellite P200 - 1FC - CD/DVD does not read discs

    I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

    Can you please help?

    Hello!

    Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

    If this isn't the case, you should try to remove the upper and lower filters:
    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Good bye

  • Satellite P200-144: Touchpad works does not after Microsoft Windows Update

    Hello

    I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

    I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

    I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

    Someone has it has happen to them, or does anyone know of a fix for this?

    Kind regards

    Chris

    Hello

    a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

    Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

    Welcome them

  • Satellite P200-1JR doesn't do nothing - all the lights are off

    My toshiba Satellite P200-1jr someday is dead and it is like new.
    All the lights are off with battery or without or with only of food.

    Please help me. I don't know what to do.

    Thank you!

    Hello

    Don t think someone could help here in your case.
    No lights (power led, led battery nor ac DC plug-in led) means there could be a problem of serious material maybe the motherboard is missing.

    If the AC adapter is defective, then the laptop must always turn on using battery power ok, this is not possible if the battery would be too empty.

    So usually a technician first test adapter and should try to plug an AC adapter right in order to test this.

    But to me it looks like something wrong with a motherboard :(
    Of course, this is only my personal opinion...

  • Satellite P200-199 - Win XP: does not work Fn + F5... Keys Fn + F9

    I had to install Windows XP on Satellite P200-199. After installation, Toshiba Hotkey Utility consists only of keys Fn + F3 and Fn + F4 and I can't change the brightness of the screen. How can I solve this problem? All programs and drivers XP downloaded from the website of Toshiba and installed correctly. BIOS version is the last (1.7.0). I can't work under Vista, and I choose Toshiba only for possibility of installation of XP :). If there is a way to change the brightness of the screen without hardware key (i.e. through a program or applet control), it is acceptable too.

    Thank you.

    P.S. On the Toshiba site, there is no version of Toshiba power saver utility for XP (for Satellite P200), but I try to install 7.08.05 version - there doesn't work (CANNOT be opened because you do NOT have right to "TOSHIBA Power Saver"). I have administrator rights (Administrator installation).

    Post edited by: SweN

    Hello

    Have you installed all the drivers in the correct order?
    Installation file instruction txt on the Toshiba page shows you the step by step guide line that the order of installation is necessary!

    With regard to the issue of keys FN;
    To my knowledge, the update of the BIOS is necessary. BIOS 1.7 - winner is not designed specifically for the XP operating system and therefore, it may happen that after the installation of the operating system XP, some functions don't work properly!
    Unfortunately, I didn't find another version of BIOS for the P200-199 PSPB0E series.

    See user's last message * vjkostas *.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24798&TSTART=0

    Concerning the issue of energy saving;
    The bomber screensaver utility and the Poser saver driver are available on page. I think first of all the pilot, and after restarting again the standby electricity utility must be installed.
    But take a look at the installation instructions.

    concerning

  • Satellite P200 - 17 c PSPB6E does not illuminate

    Hello

    I bought my wife a new Toshiba P200 - 17 c about 14 months ago and now it will not.

    Model number: PSPB6E-03G02TEN

    The laptop is plugged or run on battery, it won't.
    Once you press the button the BLUE LED power supply lights up for about 5 seconds and then turns off. At no time anything either spin or lights.

    I would appreciate some advice to help me isolate the problem and see if I can fix it.

    Thanks in advance.

    Concerning
    Dan
    .

    Hello

    Looks like a hardware problem, now I m thinking faulty RAM maybe it's just that a single module of RAM faulty s
    Swap modules also with only one module try

    But before you do that check it:
    Disconnect the power adapter, remove the battery and wait a while for example 1 hour.
    Then reconnect both sides and try to turn on the unit.

    If that does not help, my follow of RAM

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

    Hello

    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

  • Re: Satellite P200-13Z is on but nothing comes on the screen

    When I turn on my laptop the lights come on as usual and you can hear the fan but nothing cames up on top of the screen.
    Then a little light orange on the cd from the drive that lights up but I do not have a disk in it

    Did you perhaps updated RAM modules?

  • Satellite P200 - 14: nothing on the screen when the power

    Hello

    I have Satellite P200 - 14 h, and a few days ago I started having a problem power on my lap.
    I press the power button / stop, all three LEDs light up, battery, power supply and the first that shows that the adapter is plugged.

    Now my problem is that the Satellite txt is not lit, and nothing indicated on my screen.
    It's the mouth vent, black, on the bottom of the laptop, spin for a couple of times, and they stop

    Does anyone know how to fix this
    Thanks to 1 million...

    Sounds like a serious problem of material.
    Please don t understand me wrong. This is only my personal opinion... If you want to know exactly what's wrong and then the laptop must be controlled by an ASP.

    But try this first before you contact the ASP.
    Remove the battery and unplug the AC adapter
    Wait about 30 minutes and then reconnect the two parts.

    Try turning on the laptop computer.
    If that does not help, ASP is your next step

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Satellite P200 accidents + message: graphic card driver does not work properly

    Hello

    hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

    When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

    It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

    I ran a system restore but the problem remains.

    I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

    Matt

    Hello

    Sounds like the GPU problem.
    But try the graphics card driver update.
    Use the most recent driver for your graphics card.

    In addition, clean the fans of portable computers.
    Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
    Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

    If this is not enough, then a problem of graphics chip would be possible.

  • Satellite P200: Screensaver does not start on Vista Home Premium

    Hi people!

    I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

    ChrisB

    Hello

    Can I ask you if you use the Microsoft wireless mouse?
    I discovered that this may affect the functionality of the screensaver on Vista OS.

    Strange!

    Then maybe you should check out this MS article:

    + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
    http://support.Microsoft.com/kb/911895

    Feedback would be appreciated.

  • Accessibility does not work anymore on my Satellite P200-1I4

    I have a Toshiba Satellite P200 1I4 with Windows Vista on it and so far, everything has been ok, but a few days back I noticed that the accessibility of Toshiba is also known as the FN key does not work even the dark bars that appears on the family Albums disappeared.
    What is the problem you can me and how to fix?

    http://img126.imageshack.us/img126/7421/16645571rx2.jpg

    Thank you!

    I think the package has added Toshiba takes care of FlashCards.

    Then uninstall PVAT in Control Panel-> programs and features and download and install the latest version from the Toshiba site.

  • Satellite P200 - Product Recovery Disk 2/2 does not work

    Hello

    because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

    Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

    But what abot * Disck2/2 product recovery? *
    At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

    Someone had this problem too?
    What do you have on this?
    Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

    Thanks in advance for any response!

    Artisans

    Post edited by: craftsmen

    Hello

    > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

    I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
    So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

    PS: what files you can find on the second disk?

  • Satellite P200-140-CD/DVD drive does not read the CD

    Hi all

    I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
    I've updated the drivers, cleaned the lens, completed all the normal tasks.

    Any advise / solutions out there?

    Hello

    Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

    (1) run regedit (Start-Run-Regedit online online)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    I hope this works for you too! :)

    Good bye

Maybe you are looking for

  • Communities 'Start Page '.

    Currently, when I connect to communities, I go to the content.  Operating tips is the default selection.  Is it possible to have it be discussions, or at least all the content?  I'm not really loving this new update.

  • Customers who use the standard on the ISA 2006 server to access the Internet.

    The current configuration is that authentication is integrated, however guests are asked to try to navigate through the authentication, the newspaper show errors event 5719 (source Netlogon) and 8003 (source MRxSmb). Do NOT do to correct this problem

  • Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n

    I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance.  I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx". Wireless bridges is not happy. 

  • Invoke the hand image + text

    What you set the mimetype when you want to share an image, but also have a text to go with the image. Keeping to "image/jpeg" and just help you add on a text of the query attribute? query { mimeType: "image/jpeg" invokeActionId: "bb.action.SHARE" uri

  • BlackBerry Smartphones-wireless network

    Anyone know how I can disable the Green wireless network coverage?