Turn on the computer virtual fails - "could not power on VM: not found".

Similar Questions

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• Updated FF, stuck computer had to turn off the computer and now will not start.

  Toshiba Satellite PC running Windows 7.

  Received message there was an update for Firefox. Manually, clicked on it. After restarting the computer (as shown), I clicked on the Firefox shortcut icon and the Office froze. CTRL/Alt/Delete didn't work - nothing worked so forced the laptop turns off, press and hold the power button until it did.
  WAITED a few minutes and then turned the monitor never came to top - just stayed black. After a second attempt, that the computer turns on, the keyboard lights up but screen stays black. NO.
  problems before trying to update to Firefox.

  I write this on my Mac, as there's no way to use the PC with a black screen.

  Have you checked that the monitor is connected correctly and that all cables are connected entirely?

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

  You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

  Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

  First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

  Malwarebytes

  SUPERAntiSpyware

  If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

  Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

  The next place to look is the Winlogon tab, which should have little, or no, entries.

  If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

  Hi Mallik7, please try the following steps, you must succeed to solve the problem.

  To connect a client to vCenter directly to the ESX host error-free work.

  Files/etc/vmware/config the ESX host contain the lines:

  ------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ------------------------------------

  This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

  1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

  CP/etc/vmware/config/var/tmp /.

  2. edit/etc/vmware/config so that there is a return transport after the line:

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  While he reads the following:

  ---------------------------------------------

  authd.soapServer = 'TRUE '.

  prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

  Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

  Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

  ---------------------------------------------

  3. restart the management agent spend.

  Note: Make sure that you are not in your environment name resolution problems.

• "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

  "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

  I received this message during indexing on my computer.  I could not get the message, so I

  uninstalled Adobe.

  After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

  Then I tried to re - install Adobe, but who has turned to a complicated procedure.

  There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

  After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

  When I try to open the program by clicking on it, I get the above message.

  I went to the site of help from Adobe and read a complex string of instructions, including

  words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

  Needless to say that the instructions were no help.

  I said all that to say this.  I want that my computer back.  What should I do to do?

  Sincerely,

  Ralph Thompson

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  This may help: Application, file icons change in Acrobat/Reader icon

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• module of Windows install is to stop and does not immediately once I turn on the computer

  I had a problem with windows install. I have 18 updates to windows that I can not download, including windows vista sp1. After that I turned on the computer module of windows installer stops working by saying that there is a problem that caused this program to run. can someone help me?

  Hi Mbittar,

  Welcome on the site of Microsoft Windows Vista Community. Installer of Modules of Windows allows management of Windows updates (remove)

  I suggest you try these options:

  Option 1: Log on as an administrator and search for services

  Step 1: Start Search Box

  Step 2: type Services.msc

  (Provide the administrator password or a confirmation if prompted to do so.)

  Step 3: The "Windows Modules Installer" service right click and select Properties.

  Step 4: Select the general tab - make sure that the startup type is manual.

  Step 5: Right-click the BITS: select General tab - make sure that the startup type is automatic (extended), began

  Step 6: Make the update of Windows right click: select General tab - make sure that the startup type is automatic (extended), began

  Option 2: How to reset the Windows Update components? Run the Microsoft Fixit link form

  Option 3: The issue can also be caused by your security program as an antivirus or a firewall of Windows /Defender that can have conflicting settings as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Option 4: You can download updates from the Microsoft Download Center or the Windows Update Catalog

   

  List no. 1), the latest version of windows updates with xxxxxx (number 6digits) KB

  Step 2) download and install each of the windows updated manually

  For more information about how to download files from the Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:

  119591 (http://support.microsoft.com/kb/119591) how to get technical support files from Online Services Microsoft

  For more information, visit the Microsoft Web at the following sites:

  1) Troubleshooting connecting to Windows Update or Microsoft Update issues

  2) tool for description of the preparation of updated the system to Windows Vista, Windows Server 2008 and Windows 7

  3) How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues

  Option 5: If this problem persists check the errors in the Event Viewer log to find more information. The display of the error messages in the event viewer

  You can view the log at the time the accident occurred, or you can recreate the crash for the information and go back with the details to correlate more.

  Here is an article on what information is available in the Event Viewer Log file: http://windows.microsoft.com/en-us/windows-vista/What-information-appears-in-event-logs-Event-Viewer

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]