Could not send an individual column by using a data binding

Similar Questions

• SMS said "could not send" and list of clear rest 5.1.1 conversion 23.4.A.1.232

  When I try to send text messages, press the button send, it says "could not send" and list conversion remains clear!

  Updated since 4.4.4 to 5.1.1 23.0.1.a.5.77 23.4.A.1.232 - r8c.
  SmsBackupAndRestore uninstalled and disabled Delivery Report but no help.

  Sorry, I missed that.

  As it happens also in safe mode, something can happen with software phones when the phone has been updated.

  I recommend that make you a backup of all data in the phone, you need to register and you perform a repair of software using PC Companion. You have this option under the support area-> software update-> telephone repair.

  After the repair, please check if you can send a text message before restoring the backup.

• No possibility to send e-mail. At first, I could not send / receive. After three attempts. MEDICOM establishes the possibility to receive email, but I can not yet send. They recommend that I contact Dell!

  September 11 also cannot send an email. At first I could not send or receive / send. After a few trials with Medicom, I can now receive, but not send. They say contact DELL.  I'll pass on our other computer wiring and see if I have the same problem (the other can send & receive) if my computer's working there, so I guess this isn't a problem for DELL. Seems strange that so many others have the same problem on this date.

  Hi Harold,.

  Thank you for visiting Microsoft Community to post your query. It seems that you are unable to send mail using the web mail account Medicom.  I couldn't find much information about the issue. However, as many users is faced with the question, there could be some intermittent problem, you can wait for a while and have access to the e-mail account later.

  Try to access the e-mail account using different browser and check if the problem persists.

  1. What browser do you use? If you use Internet Explorer version of Internet Explorer?

  2. You receive error messages?

  Please contact the support of Medicom once again, they should have the information.

  https://support.mediacomcable.com

  Hope that the information provided is useful.

• Error messages on the Palm Pre 2 - "could not send your message because of a network error. Try Again' 96

  I used the Palm Pre 2 when I was in the United States with an ATT Sim Card and I was able to use all the features well. I come down to the India and got a local SIM with data services. I am able to check email / synchronize outlook etc and make calls. However I get an error for text messages "" could not send the message due to a network error. Try again. 96 "

  Please tell me what could be the cause. Have restarted the phone twice, no change...

  Would appreciate any help you can give me on this

  I thought about it. I have a 32 k SIM. If I use a 64 k SIM, SMS works fine

• Error message "Could not send" when sending a signature file

  Help, please. I sent signature files for some time and suddenly what adobe said that he "could not send" and that an error has occurred and try again. Tried several times, same thing. Anyone know what is happening?

  Thank you.

  Another Member told me that he had the same problem and it seemed to help:

  "Yes, after much effort and to the back-and-forth, he ended up being a problem with my email account. Main associated with my Adobe account, but not my EchoSign account, I didn't know was somewhere along the line I changed my e-mail address. Once the two were under the same email, the problem has been resolved. Hope that helps you. »

  So, I realized that I have subscribed to Acrobat DC using my gmail email address and then then move to an e-mail address of different work - which must have been the problem for me too, when I turned on my adobe account to use gmail, the problem seems to have fixed itself.

• I get this when I try to send e-mail with an attachment that Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Hotmail as well as all the problems of Windows Live are Windows Live Solution Center. It's their jurisdiction.

  Please post on forum discussions for Hotmail:
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Failed to install FglAM. Could not send request to the upstream host

  Hello

  I installed FMS in HA mode with only HTTPS.

  When Installing Agent Manager, get error in "Server URL" screen.

  Error message: could not send request to the host https://160.110.78.27:443 upstream

  See the attached screenshot.

  Able to access the FMS in the browser...

  In this case, the problem is probably due to the requirement of a certificate.

  See the SupportLink Knowledge Base article and let us know if it applies:

  How Fglam works with self-signed certificates and part 3? What are the options that can (77978)

  Kind regards

  Brian Wheeldon

• Could not send data to configuration ldap to libOvd for the instance of service 'idstore.ldap' - 'socketOptions' element should not

  Hello

  I have an installed WebLogic 10.3.6 with ADR 11.1.1.6 cluster.

  Everything worked fine until recently when I installed Web Tier 11.1.1.7 and associated with the instance of OSH with my WebLogic AdminServer EM.

  Now I can't start my managed servers, receive the below error message.  I tried to add "-Djava.security.debug = jpspolicy" to JAVA_OPTIONS strings in startManagedWeblogic.sh, but they do not get more information.

  JAVA_OPTIONS = "-Djava.security.debug=jpspolicy-Dweblogic.security.SSL.trustedCAKeyStore="/u01/app/oracle/Middleware/wlser\

  "Ver_10.3/Server/lib/cacerts" ${JAVA_OPTIONS} "

  Any advice would be appreciated.

  # < 26 June 2013 16:22:23 UTC > < critical > < WebLogicServer > < gds-dev-mt-1 > < ManagedServer_1 > < main Thread > < < WLS Kernel > > <><>< 1372263743069 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed due to the exception, see exception stack trace or the log file of the server root. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: oracle.security.jps.JpsRuntimeException: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

  to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at java.lang.Class.newInstance0(Class.java:357)

  at java.lang.Class.newInstance(Class.java:310)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

  at weblogic.security.SecurityService.start(SecurityService.java:142)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Layer Web 11.1.1.6 does not exhibit this problem.  Sex Web 11.1.1.7 patched the oracle_common and I feel is not compatible with ADR 11.1.1.6 or 11.1.1.7

• EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  Hi all

  When you open the HFM application below the error is thrown.

  EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  
  

  Another application is created as Test HFM, is the opening perfectly.
  

  Please help me on this issue, very urgent.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks to all of you question has been resolved by re set up again for the configuration database and upgrade from previous version.

  Concerning

  Satheesh.S

• Using the data binding on each button in a ToggleButtonBar

  Can someone tell me if it is possible to use the data binding on the individual buttons in a ToggleButtonBar and, if so, how?
  
  I want to be able to use the data binding for each individual button in the ToggleButtonBar 'enabled' property, but is not possible using MXML because the ToggleButtonBar takes a data provider to display labels for each button and, obviously, I can't set the "enabled" on the values of dataprovider property because they are not objects Button. For example, I'm not allowed to do something like this:
  
  < mx:ToggleButtonBar id = "tbb".
  toggleOnClick = 'true '.
  itemClick = "clickHandler (event)."
  creationComplete = "tbb.selectedIndex = 1" >
  
  < mx:Button label = "A" active = "{...}" / >
  < mx:Button label = "B" enabled = "{...}" / >
  < mx:Button label = "C" enabled = "{...}" / >
  
  < / mx:ToggleButtonBar >

  Ah! The ToggleButtonBar. Liaison. MXML. mysterious. Not obvious. But yes, we CAN do...
  First, you will need to get the buttons to toggle. Did you know that they are actually ButtonBarButtons? Once you get an instance of each of them, you can do the binding in MXML.

  Each button LINK below the ViewStack is bound to a ToggleBarButton.
  When you click a related button below, the LINK button above it will have its enabled enabled/disabled property. Then a link fires, setting the enabled property of the related ToggleBarButton.

  This example requires that you know advance how toggle buttons and buttons, you have, so it will not evolve well. Whenever you add a button, you will need to enter hard in the 'getButtons' function, which implements the ButtonBarButton instances. But if you have a known quantity of buttons, no problem.

• We received a phone call saying that Microsoft could not send us updates. Is this a legitimate call and you can do the updates direcetly online?

  We received several calls saying updates could not be performed on our computer.  We were warned that the computer may crash.  They asked us to turn on our computer and they would try to make updates in this way.  I have a question the legitimacy of the request and how they got to our phone number.  Please respond by email and tell me it is OK.  In addition, the appellant also had a strong accent, it was very difficult to even understand.  Thank you for your response.

  Scam!

  I received a phone call from someone who claims to have a Virus
  http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001
  (10 Aug-09 &ff; 44 pages/88 posts from 27 Jan-12)

  Avoid scams phone & other support Tech Cyber scams
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Avoid scams that use the Microsoft name fraudulently [phone & email]
  http://www.Microsoft.com/security/online-privacy/msName.aspx

• Could not initialize and I need to recover the data on the hard drive.

  Original title: computer MOM will not start and I need to recover the data on the hard drive.

  It's an old computer and I do not know what version of Windows it was running.  I guess I need a bootdisk of exploitation, but where can I download that?  Or would it be easier to pull and make a secondary drive in my computer that I just replaced?  It works under Windows XP.

  Hello

  If the old system does not start could be the hard drive. Put the hard drive in another computer as a 2nd drive and then access the files. If you use a computer XP, Vista or Windows 7, you should be able to access the files, unless the drive has failed.

  You can save your files by putting the drive in another computer as a 2nd drive (better) or a USB external drive case and then save up to removable media such as CD, DVD or other USB drives. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This will not work if the hard disk is defective or other issues preventing the system from booting from the CD/DVD drive.)

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows could not load the NLS being missing or corrupt data.

  I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.

  I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).

  Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.

  Thanks in advance for your help.

  Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:

  I set up an instance of Vista virtual machine and copied since all the
  *.nls in/Windows/System32 files and all *.fon files of the
  Windows/Fonts.  I then put on a USB key and inserted in
  the breakage of the machine.

  I didn't know that this WindowsRE could read USB drives. It does things
  easier. I then crushed the files on the area damaged with those of the
  clean installation and a reboot took me directly in Vista.

  If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.

  Let's see how these options work before considering anything else.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use the data binding on a cluster?

  Hello

  I just discovered the data binding and used it on some primitive controls/indicators. I love the cleanliness of the approach (no additional querying and son required!)

  Now, this page gives to think I can link a cluster with a shared too variable. However, when I right click-> properties, I see that the tabs appearance and Documentation (and I know that I did not accidentally choose an element inside the cluster, because (1) there is a typedef strict, and said the title of (2) 'The Cluster Properties' dialog box). Where can I find the data binding tab?

  Thank you

  Hi JKSH,

  What you're doing is possible if you make the file .ctl as the definition of type rather than a strict definition of type. With a strict definition of type all instances of the same .ctl file link that is why you cannot use data binding.

• I use Live mail all the time, but today I could receive emails and could not send email. I get this error 0X800CCC0E.

  I use live mail and Comcast as my ISP.
  Out of the blue I can receive emails, but when I try and send emails I get this error.

  error 0X800CCC0E.
  

  Comcast is no longer supported the use of port 25 for SMTP. Please follow the instructions on this page to apply the recommended settings: to reconfigure your Windows Live Mail client to use SSL instead of port 25

  After, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Then close WLMail and wait a few minutes before resuming. Compose a new message to test and send it to yourself. Post a new message in your response.