CPD watchdog validation
Hi team,
My system automatically updated to windows 8, 8.1 and for activation, I contacted with MS Customer care, but it fails to activate, then according to the MS customer, I went to downgrade 8.1 to 8 and fact. But after downgrade my system was not start it showing the CPD Watchdog validation.
Please help me solve this problem.
System manufacturer: DELL
Model: N5110
Thanks in advance,
Anand
Hello
Check out these resources:
Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">->
http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx
BBCode: 133 0 x 00000133<-- read="" this="">-->
* 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-
Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.
Translate Windows 7 methods and use them on Windows 8/8.1
Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).
We can analyze the minidumps if make you it available the onedrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.
Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial
A disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folder
ZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8/8.1)
http://www.winvistatips.com/disable-automatic-restart-T84.html
=======================================================
Run checkdisk (chkdsk /f r)
Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive
How to check a drive for errors with "chkdsk" in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html
Redesign of chkdsk and the new model of health NTFS
http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx
-----------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8
Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
========================================================
Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).
How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC
How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html
How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html
If you need a USB Flash Drive recovery or other methods:
How to create a recovery USB in Windows 8 & 8.1
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html
How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html
Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html
----------------------------------------------------------------------------------------
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617
How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html
Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx
How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM
Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html
Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php
How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM
You can disable the driver verifier
http://support.Microsoft.com/kb/244617
WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.
If the driver verifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Windows 8 Pro - blue screen with CPD Watchdog continuing Violation coming
I just installed Windows 8 Pro four days ago on my new PC (two months) that came with Windows 7. I randomly get the blue screen with Violation of CPD watchdog, and the PC restarts. It is very frustrating and never had this problem with Windows 7.
Also, on my desk, get Ezupdt window warning and I was wondering if it is related?
Hello world
Problem solved. My free version of AVG 2012 was the root cause of the problem. I was able to get a free through Microsoft consultation as my warranty period of Windows 8 is still valid (less than 90 days).
Time AVG has been removed, the problem has gone.
-
I get CPD Watchdog Violation whenever I use word or excel
I get the CPD Watchdog Violation whenever I use word or excel. I uninstalled and reinstalled the program.
Can someone help me solve this problem? Where can I find the dump file to send someone may view and solve problems?
Thank you!
Rachel
133 error checking, {1, 1e00, 0, 0}
Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)
Follow-up: MachineOwner
Unfortunately, there is nothing conclusive in these dumps, bar a few tips here and there for us in the right direction, but we can take some measures that can help solve the problem.
1. update your BIOS.
Identification information of the machine [of Smbios 2.7, DMIVersion 39, size = 1390]
BiosMajorRelease = 4
BiosMinorRelease = 6
BiosVendor = FRIEND
BiosVersion = 8.03
BiosReleaseDate = 28/09/2012
SystemManufacturer = Hewlett-Packard
SystemProductName = 23-e010
Family = 103C_53316J G = D
SystemVersion = 1.00
SystemSKU = H3Y95AA #ABA
BaseBoardManufacturer = PEGATRON CORPORATION
BaseBoardProduct = 2AF1
BaseBoardVersion = 1.02
1: kd >! cpuspeed sysinfo
CPUID: "Intel (r) Core i5 - 3470 T CPU @ 2.90 GHz"
MaxSpeed: 2900
CurrentSpeed: 2893BIOS of desktop PC HP Compaq consumer update (SSID 2AF1 ROMA family).
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139899-1&cc=us&DLC=en&LC=en&OS=4132&productOid=5296835&sw_lang=&product=5351314Caution:
BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
2. Update Windows 8.1.
You have an external VGA video card Multi monitor adapter USB 3.0 to installed? If you do, please make sure that it is installed correctly and working properly.
If you continue to crash, please run the Verifier (DV) according to the instructions in the link below.
Note: Be sure to read and remember the steps to reset the DV in case of crash and post a link to the newly generated crash dump here.
Driver Verifier - stalking a bad driver to behave. Co-written by ZigZag3143 & JMH3143
http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983Please download a copy of your system information file. Click 'Start', type "msinfo32", click on "file" at the top of the page, select 'export' and give the file a name and click "Save".
Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.
-
CPD Watchdog Violation when connecting to Internet
I just built a new computer and I had a problem with the connection to the Internet.
After you have installed the network adapter and the drivers that come with the CD I have connected to my home network. It worked for maybe a minute or two, but then my computer would freeze for maybe about 5 seconds then blue screen with the message «Violation of Watchdog DPC» This happens whenever I try to connect to the Internet.
As far as I know all my drivers are up to date, as I installed them directly from disks accompanying parts.
I don't have any installed programs other than the stuff that comes with Windows and some drivers.
DPC_WATCHDOG_VIOLATION (133)
The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
or higher.
Arguments:
Arg1: 0000000000000000, just a DPC or ISR exceeded his time d. Delinquency
component may generally be identified with a stack trace.
Arg2: 0000000000000501, counting from the time the DPC (in ticks).
Arg3: 0000000000000500, DPC time of bids (ticks).
Arg4: 0000000000000000Bug check 0 x 133 DPC_WATCHDOG_VIOLATION.
http://msdn.Microsoft.com/en-us/library/Windows/hardware/jj154556 (v = vs. 85) .aspx
Resolution error blue screen in Windows.
http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors
Unfortunately, this crash dump failed to identify the driver responsible. Run the Verifier (DV) according to the instructions in the link below.
Note: Be sure to read and remember the steps to reset the DV in a collision. Please download the Minidump generated recently to your onedrive and share the link here.
Driver Verifier - stalking a bad driver to behave. Created by ZigZag3143, Co.authored by JMH3143
http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983 -
I get the BSOD with error Violation of CPD watchdog for a few days now on my computer running Windows 8. I searched and read a bunch of other posts related to this error, and there seems to be a very broad error message. Because of what I was doing at the time of accidents, installation of games (WoW & TERA) and streaming video, I thought it might be a updated driver for my wireless card but after updating that and the driver LAN for the mobo, I always get the BSOD. I posted a link to the file the last crash on skydrive below minidump and my less than system characteristics.
Motherboard ASUS F2-A85-V Pro
AMD A6 - 5400K Trinity 3.6 GHz APU
Corsair Vengeance 16 GB of DDR3 memory
Intel 330 series Maple Crest 60 GB SSD (boot drive)
Seagate Barracuda 2 TB HDD
ASUS PCE - N15 PCI Express Wireless Adapter card
RS
This accident was related to driver helper ndisrd.sys NDISRD NT Kernel Resources. Yours is 2 years and more. I'd install the most recent driver available, even if it is the same date that your probably became corrupted
I would also upgrade to win 8.1
By: 9200.16628.amd64fre.win8_gdr.130531 - 1504
Error checking 133, {1, 1e0d, 0, 0}
WARNING: Unable to verify timestamp for ndisrd.sys
ERROR: Module load completed but symbols can be loaded for ndisrd.sys
Probably caused by: ndisrd.sys (ndisrd + 2ed9)DPC_WATCHDOG_VIOLATION (133)
The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
or higher.
Arguments:
Arg1: 0000000000000001, the system has cumulatively spent a long period of time to
DISPATCH_LEVEL or above. The offending component may generally be
identified with a stack trace.
Arg2: 0000000000001e0d, the monitoring period.
Arg3: 0000000000000000
Arg4: 0000000000000000Debugging information:
------------------DPC_TIMEOUT_TYPE: DPC_QUEUE_EXECUTION_TIMEOUT_EXCEEDED
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0 X 133
Nom_processus: System
CURRENT_IRQL: d
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff802c0be2fa3 to fffff802c0a63440
STACK_TEXT:
fffff880 '054f43a8 fffff802' c0be2fa3: 00000000'00000133 00000000'00000001 00000000' 00001e0d 00000000' 00000000: nt! KeBugCheckEx
fffff880 '054f43b0 fffff802' c0aa81e1: 00000000'00000002 fffff880 '02-00180 fffff880' 054f4510 fffff780'00000320: nt! : FNODOBFM: 'chain' + 0 x 14600
fffff880 '054f4430 fffff802' c1177e94: ffffffff 'ffd0a270 fffff802' c11a1902 00000000' 0bbc5261 00000000' 00000000: nt! KeUpdateRunTime + 0 x 51
fffff880 '054f4460 fffff802' c0a5c73a: 00000000' 0a2b7b48 00000000' 0cbc3cdf fffff802'c11a19a0 00000000' 00000000: hal! HalpTimerClockInterrupt + 0 x 50
fffff880 '054f4490 fffff802' c0a44310: 00000000'00000000 00000000'00020106 fffffa80'0d9ae200 00000000' 00000000: nt! KiInterruptDispatchNoLockNoEtw + 0x1aa
fffff880 '054f4620 fffff802' c0ab54e5: 00000000 00000000' fffff880 '054f5c10 fffff880' 054ef000 00000000 00000001': nt! KxWaitForSpinLockAndAcquire + 0x20
"fffff880 '054f4650 fffff880' 0596aed9: fffffa80 ' 10686840 fffff802 ' c0abb405 00000000'00000000 00000000'00000000: nt! KeAcquireSpinLockRaiseToDpc + 0x35
fffff880'054f4680 fffffa80'10686840: fffff802'c0abb405 00000000'00000000 00000000'00000000 00000000'00000000: ndisrd + 0x2ed9
fffff880 '054f4688 fffff802' c0abb405: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 016c5a34: 0xfffffa80'10686840
fffff880 '054f4690 fffffa80' 0db3c2f0: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
fffff880 '054f46d0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0xfffffa80'0db3c2f0STACK_COMMAND: kb
FOLLOWUP_IP:
ndisrd + 2ed9
fffff880'0596aed9? ???SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: ndisrd + 2ed9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ndisrd
Nom_image: ndisrd.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fc6df85
FAILURE_BUCKET_ID: 0x133_ISR_ndisrd + 2ed9
BUCKET_ID: 0x133_ISR_ndisrd + 2ed9
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x133_isr_ndisrd + 2ed9
FAILURE_ID_HASH: {c3bcadcd-874f-3407-01b5-a6ff3ab0534a}
Follow-up: MachineOwner
--------- -
Violation of CPD watchdog error
Hello
Whenever my computer wakes from sleep, or after I closed the computer I get an error of violation of CPD watchdog. Then I have to restart my computer several times before I can actually use it.I tried running windbg without success. I get error module unkonw.If someone could help me, understand me what is causing the blue screen, it would be great!One of the minidump files had a damaged however the last file referenced minidump Windows the storport.sys driver module and the storage the list nvstor.sys NVIDIA driver.
Can you open up Windows Update and "Check for updates".
Are there optional updates available for the storage NVIDIA controller?
Also, Avast has been known to cause blue screen problems in some configurations so I would say to uninstall Avast and just use firewall and antivirus integrated Windows 8 (Windows Defender).
Also, you can run the following two applications just to see if they do anything:
TDSSKiller:
http://support.Kaspersky.com/FAQ/?QID=208283363
Malwarebytes anti-malware (free version - decline the invitation to install the full version of trial) - do a "Quick Scan":
-
Iastor.sys and Bsod CPD watchdog
Hi I have an ASUS g series, and I get Iastor.sys bsod when I connect and if it doesn't I receive watchdog dpc randomly
JAS
These related iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp. I'd install the most recent driver available, even if it is the same date that drivers become corrupt. If you have a SSD or hybrid, I would also like to update the firmware.
If you continue to plant I remove McAfee and use the built in Defender in his place.
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Users\Ken\Desktop\061614-139437-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
C:\Users\Ken\Desktop OKSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9200 MP (8 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 9200.16424.amd64fre.win8_gdr.120926 - 1855
Computer name:
Core = 0xfffff802 '21c6e000 PsLoadedModuleList = 0xfffff802' 21f38a60
The debugging session: 10:56:47.776 Mon June 16, 2014 (UTC - 04:00)
System Uptime: 0 days 0:01:26.465
Loading the kernel symbols
...............................................................
.......................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
BugCheck D1, {44, 2, 0, fffff8800167920e}
WARNING: Unable to verify timestamp for iaStorA.sys
ERROR: Module load completed but symbols can be loaded for iaStorA.sys
Probably caused by: iaStorA.sys (iaStorA + 1a20e)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If the kernel debugger is available, get a stack backtrace.
Arguments:
Arg1: 0000000000000044, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800167920e, address memoryDebugging information:
------------------READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80221fc4168
GetUlongFromAddress: cannot read fffff80221fc41f8
0000000000000044 non paged poolCURRENT_IRQL: 2
FAULTING_IP:
iaStorA + 1a20e
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0hCUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
Nom_processus: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
DPC_STACK_BASE: FFFFF80221011FB0
TRAP_FRAME: fffff80221011870-(.trap 0xfffff80221011870)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff880016f1070 rbx = 0000000000000000 rcx = fffffa8010813a10
RDX = fffffa8010813a28 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff8800167920e rsp = fffff80221011a00 rbp = 0000000000000000
R8 = fffffa8010813ab8 r9 = 0000000000000021 = 0000000000000000 r10
R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
iaStorA + 0x1a20e:
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0h, ds:00000000'00000044 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80221ce8069 to fffff80221ce8d40
STACK_TEXT:
fffff802 ' 21011728 fffff802' 21ce8069: 00000000' 0000000 a 00000000'00000044 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
fffff802 ' 21011730 fffff802' 21ce68e0: 00000000'00000000 00000000'00000000 fffff802 ' 21011900 fffff802' 21011870: nt! KiBugCheckDispatch + 0 x 69
fffff802 ' 21011870 fffff880' 0167920e: fffffa80'10813 has 10 fffffa80 '0eca0020 fffffa80' 0ec9dbd0 00000000'00000002: nt! KiPageFault + 0 x 260
'21011-00 fffffa80' fffff802 a 10813, 10: fffffa80'0eca0020 fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' a 10813, 10: iaStorA + 0x1a20e
fffff802 '21011-08 fffffa80' 0eca0020: fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' 10813a 10 fffff880'0166588f: 0xfffffa80'10813 has 10
' fffff802 '21011-10 fffffa80' 0ec9dbd0: 00000000 ' fffffa80 00000002 '10813 has 10 fffff880' 0166588f fffffa80 ' 0df47f00: 0xfffffa80'0eca0020
fffff802 '21011 a 18 00000000' 00000002: fffffa80'10813 has 10 fffff880 '0166588f fffffa80' 0df47f00 00000000' 00000000: 0xfffffa80'0ec9dbd0
fffff802 '21011-20 fffffa80' 10813a 10: fffff880'0166588f fffffa80 '0df47f00 00000000 00000000' fffffa80' 0df47f21: 0x2
fffff802 '21011-28 fffff880' 0166588f: fffffa80'0df47f00 00000000 00000000' fffffa80 '0df47f21 fffffa80' a 10813, 10: 0xfffffa80'10813 has 10
fffff802 '21011-30 fffffa80' 0df47f00: 00000000 00000000' fffffa80 '0df47f21 fffffa80' 10813a 10 00000000 00000000': iaStorA + 0x688f
fffff802'21011 has 38 00000000 00000000': fffffa80'0df47f21 fffffa80 '10813a 10 00000000 00000000' fffffa80' 0ec9d798: 0xfffffa80'0df47f00STACK_COMMAND: kb
FOLLOWUP_IP:
iaStorA + 1a20e
fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0hSYMBOL_STACK_INDEX: 3
SYMBOL_NAME: iaStorA + 1a20e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: iaStorA
Nom_image: iaStorA.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5175919d
FAILURE_BUCKET_ID: AV_iaStorA + 1a20e
BUCKET_ID: AV_iaStorA + 1a20e
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_iastora + 1a20e
FAILURE_ID_HASH: {23e6ee3b-e85f-41b3-c240-f78c010c906c}
Follow-up: MachineOwner
--------- -
Windows 8 - repeated screens CPD Watchdog Violation blue
Separated from this thread.
Hello
I have the same problem also when I use MSI afterburner windows crash and displays the DPC_WATCHDOG_VIOLATION message.
Can u please help me
THX
Hello
Well check with MSI Support, their drivers and documentation online and ask in their forums
on the known issues and solutions. Obviously you shouldn't use MSI Afterburner if she is originally
blue screen problems, the cause is obvious.Support MSI
http://www.msi.com/index.php?func=serviceMSI - Downloads (drivers and BIOS)
http://www.msi.com/index.php?func=downloadindexMSI - Forums
http://Forum-en.msi.com/MSI - Service
http://us.msi.com/index.php?func=serviceMSI - Live Update online
http://www.msi.com/index.php?func=downloadindexMSI - Contacts - USA - North America value
http://www.msi.com/index.php?func=HTML&name=aboutus===============
Check out these resources: the real solution will probably come from MSI.
Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">->
http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspxBBCode: 133 0 x 00000133<-- read="" this="">-->
* 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8/8.1
Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).We can analyze the minidumps if make you it available from the OneDrive or other
file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65=======================================================
Run checkdisk (chkdsk /f r)
Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.htmlRedesign of chkdsk and the new model of health NTFS
http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx-----------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly========================================================
Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a USB Flash Drive recovery or other methods:
How to create a recovery USB in Windows 8 & 8.1
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html
How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlBoot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html----------------------------------------------------------------------------------------
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If the driver verifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
BSOD violation of CPD watchdog error
Hi friends,
I'm reposting this question.
I'm facing serious problems because of my laptop crashing.
It shows the BSOD with error DPLC WATCHDOG VIOLATION as much as 3 - 4 times a day.
This problem has increased in recent weeks. my laptop freezes and crashes randomly.
It affects my work.
Please provide a solution for this keep in mind that I want to avoid the upgrade of my Windows OS 8.1 because it increases this problem and adds a lot of other problems, such as the fall of wifi, bluetooth works now correctly, the fan rotates to continuously at high speed (even if no applications such as games or videos etc. are currently running).
Here is the link to the latest information of minidumps and system. (compressed using 7 - zip)
I use HP PAVILION G6 2312-AX laptop which comes preinstalled with windows 8.
I updated my drivers and bios for later
Please help me as soon as possible.
Thanks in advance.
I think that these well enough below, error messages describe what cause your system to hang and eventually crash. I also believe that Quick Heal AntiVirus plays a role which is not registered in these messages, based on the experience of similar questions I being debugged.
[Peripheral problem]
Device PNP_Device_ID Error_Code
VMware Virtual Ethernet adapt for VMnet1 ROOT\VMWARE\0000 this device is disabled.
VMware Virtual Ethernet adapt for VMnet8 ROOT\VMWARE\0001 this device is disabled.02/06/15 05:28 Windows Error Reporting crash bucket, type 0
Name of the event: ServiceHang
Answer: No available
Cabin ID: 0Signature of the problem:
P1: VMUSBArbService
"P2: vmware - usbarbitrator64.exe"
P3: 0.0.0.0
P4: 10
P5: 2
P6:
P7:
P8:
P9:
P10:........
02/06/15-04:38 Windows Error Reporting crash bucket, type 0
Name of the event: ServiceHang
Answer: No available
Cabin ID: 0Signature of the problem:
P1: VMUSBArbService
"P2: vmware - usbarbitrator64.exe"
P3: 0.0.0.0
P4: 10
P5: 2
P6:02/05/15-20:08 Windows Error Reporting crash bucket 0x133_DPC_usb8023x! CancelSendsTimerDpc, type 0
Name of the event:BlueScreen
Answer: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=0x133_DPC_usb8023x! CancelSendsTimerDpc& State = 1 & ID = c69b0f16-56b1-46e1-9a78-c6beeeeb4ad3
Cabin ID: c69b0f16-56b1-46e1-9a78-c6beeeeb4ad3Signature of the problem:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9: : ..........02/05/15 19:39 Windows Error Reporting crash bucket 0x133_DPC_usb8023x! CancelSendsTimerDpc, type 0
Name of the event:BlueScreen
Answer: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=0x133_DPC_usb8023x. CancelSendsTimerDpc& State = 1 & ID = d1d12056-aac4-4eec-885c-6142823ce359
Cabin ID: d1d12056-aac4-4eec-885c-6142823ce359Signature of the problem:
P1:Please Uninstall VMware completely and if the crash stops, then we have our guilty, but otherwise, Uninstall Quick Heal for troubleshooting purposes and turn on Windows Defender.
Quick Heal product removal tool.
http://www.Quickheal.com/prod-REM
How to turn Windows Defender on or off in Windows 8 and 8.1.
http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html
-
CPD WATCHDOG VIOLATION WINDOWS 8
Hello! I have been reading posts on this violation of dog guard, but unlike the others, I have no idea what is causing my laptop (VAIO E series) freeze and restart with "dpc violation of guard dog. I use my laptop primarily for surfing the internet and download torrents. also, I don't know how where and how to register my windows minidump to a temporary location. Thank you!
Hello
Check with Sony Support, their online documentation and drivers, diagnostics and ask for their
Forums about known problems.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forums
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport======================
Check out these resources:
Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">->
http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspxBBCode: 133 0 x 00000133<-- read="" this="">-->
* 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate these methods of Windows 8 (there is little real difference):
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html=======================================================
Run checkdisk (chkdsk /f r)
Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.htmlRedesign of chkdsk and the new model of health NTFS
http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx-----------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8 - why isn't Windows find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly----------------------------------------------------------------------------------------
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If the driver verifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
CPD Watchdog Violation on my Toshiba Satellite and impossible to verify updates
I had Violation Watchdog DPC on my Toshiba Satellite. It's frustrating to worm. How can I solve this problem?
Here's my minidumps files https://skydrive.live.com/redir?resid=67BCFC4F8EC6B99B 107
Hi Sheikh R,.
You seem to have two software antivirus/firewall in real-time installed, Norton and Avira which can cause stability problems.
Can you uninstall Norton and Avira and see if that helps.
For security software consider using just firewall and antivirus integrated Windows 8 (Windows Defender).
I would also uninstall the c:\windows\system32\drivers\sptd.sys pilot who has been known to cause blue screen errors in some configurations.
Uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it's Daemon Tools or Alcohol 120%.
Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:
-
I have Lenovo idea pad touch p400
I am running windows 8.1I get this error every five to ten minutes to comeHe says that there is a violation of watchdogAnd what a collections data on itI tried updating the drive but nothing happensIt happens every 5-10 minutes with or without internet connectionHello
Results verified BlueScreenView WinDBG / DumpCHK.
The Bug_Check were 133 CAUSE NETIO. SYS that is a component of Windows, which means
Another thing he has led astray.133, {0, 501, 500, 0} error checking
Probably caused by: NETIO. SYS (NETIO! StreamInjectRequestsToStack + 24 (a)
NETIO.sys is a component of Windows, so the error means that something he has led astray.
The most common CAUSE are network in use drivers or a 3rd party antivirus. Check
with support from the system manufacturer (manufacturer of motherboard for customized systems), the drivers online.
and ask in their forum (if there is one) on the known issues. And check with the manufacturer of real device
for even more recent driver versions or if you use a separate network device.Also check with the system/motherboard manufacturer for updates to the BIOS, chipset low level
drivers and device drivers loaded. And with the manufacturers of separate devices for updates
for these drivers.1. you are running two antivirus which is a major DON'T. Uninstall one and the use of its creator
removal tool to avoid problems causing remains.List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146------------
2. check with Lenovo support, their drivers and documentation online and ask in their forums
on known problems. Updated BIOS, drivers of low level chipset and on-board major and
separate device drivers. Of course, update the network drivers (WiFI.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/NETwew00.sys dated 25/06/2013 WiFi Driver Intel.
For the Intel driver update utility<-- run="" this="" after="" checking="" with="">-->
http://www.Intel.com/p/en_US/support/detect?redirector_count=1&Intel Download Center
http://Downloadcenter.Intel.com/Forums and Intel - Support - community
http://intelopenport.hosted.Jivesoftware.com/Community/TechBiosVendor = LENOVO
BiosVersion = 71CN44WW (V1.17)
BiosReleaseDate = 03/04/2013<->->
SystemManufacturer = LENOVO
SystemProductName = 20211
Family = IDEAPAD
SystemVersion = P400 Lenovo IdeaPad Touch
SystemSKU = LENOVO_MT_20211
BaseBoardManufacturer = LENOVO
BaseBoardProduct = INVALID
BaseBoardVersion = 31900003WIN8 STD MLT------------
3 use the methods needed to solve previous problems.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
The incessant CPD Watchdog Violation?
I have a Lenovo laptop, G780, and recently, I was not able to connect to all without any BSOD. This causes my laptop restart and he ends up in a reboot loop after a reboot. The only way for to connect me with success is to do a system restore
* The problem started to occur just after I downloaded DC Universe. I uninstalled since, but am still stuck with this problem.
You have done, thank you!
The two attached DMP files are bug control DPC_WATCHDOG_VIOLATION (133) .
This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above.
Usually the processes accompanying the accident are not relevant in most cases, but according to what they are and their level of impact on the system, they may very well be. In your case, the crash of a process is important and it is compliant: nom_processus: avgnsa.exe
^^
EXE from moy.Remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:
-AVG removal tool http://www.Avg.com/us-en/utilities
Kind regards
Patrick
-
Windows 8 How can I solve violation of CPD watchdog
Hi everyone I have this violation of watchdog of dpc error or problem
I have no anti virus I use windows defenderHere's my minidump filesThank youOf course, it's a driver problem. Please run the Driver Verifier to find what's wrong to behave
2. Driver Verifier
Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.But sometimes it will crash and will not tell you the driver.
Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
Here is the procedure:
Click Start and type "auditor" (without the quotes) and press enter
Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))Choose "Select custom settings from a full list" and click "Next".
Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
Select "Select driver names from a list", then click "next".
Select all drivers that are NOT provided by Microsoft, and then click "Next".
On the next page, select "Finish".
Restart the system and wait as he crashed to blue screen.
Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
If you are unable to Windows because it crashes too early, try safe mode.
If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.Further reading
http://support.Microsoft.com/kb/244617Words of driver verifier
Information check driver driver Windows Vista - Microsoft Search Verifier
Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
Pilot feature pool http://support.microsoft.com/kb/188831 -
How can I solve the problem of "violation of CPD watchdog"
Hi I have a g6 2201ax pc pavilion. When I started working on it after some time it showes a message that your pc has violation of dpc and computer watchdog cannot solve it will restart, and these messages shows over and over again and the pc reboots over and over again...
Please help me solve this problem...
Thank you...
JBYou have installed SSD?
You can download and run the free version of this utility called WhoCrashed? to help find what causng the error.
Best regards
ERICO
Maybe you are looking for
-
Satellite M35X-S109: Home Toshiba screen comes after 13mins
Hello My toshiba laptop starts in 15 minutes and I'm very unfortunate for this reason. Problem is when I try to open my laptop power button gets blue and fan works but screen Toshiba comes in 13mins. and windows opens normally in 1.5mins and, after t
-
Download driver WiFi adapter required
My computer laptop 17-f105na Pavilion has a Broadcom BCM43142 wireless adapter and I want to download the latest driver from the web. Research of a window simply said that I later already, then gives me is not an access site to download. Broadcom pro
-
Help! Can I re - install Windows XP after a virus / Malware crash?
Basically, my laptop picked up what appears to be a boat load of virus / malware of some link and has started flashing upward with safety messages, then adobe flash crashed... then the entire closed system. Now, when I turn on all I get is a black sc
-
Cannot find volume icon in the tray of notfication
I use to have the volume icon in the notification area, and all of a sudden it's gone! Looked in properties and found, but the volume icon is shaded out and I can't find a way to hire him again. help please
-
Lost in Outlook Express - trying to retrieve missing files
Hello- I hope someone can help me. Our desktop computer crashed, so rather that investing in a new system, we decided to use our working laptop and bought a box for the drive of the old computer motherboard, because that had not been affected. It now