CPD Watchdog Violation when connecting to Internet

Similar Questions

• computer is slow when connecting to internet

  computer is slow when connecting to internet

  Hi Jerome,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) do you use Internet Explorer to access the Internet?

  (2) what Internet connection type you have? Is it wireless or wired?

  (3) don't you make changes to the Internet connection settings prior to this problem?

  Follow the steps in the link given below to solve the problem.

  Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Write to us at the State of the question. We will help you to come.

• I get CPD Watchdog Violation whenever I use word or excel

  I get the CPD Watchdog Violation whenever I use word or excel.  I uninstalled and reinstalled the program.

  Can someone help me solve this problem?  Where can I find the dump file to send someone may view and solve problems?

  Thank you!

  Rachel

  133 error checking, {1, 1e00, 0, 0}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner

  Unfortunately, there is nothing conclusive in these dumps, bar a few tips here and there for us in the right direction, but we can take some measures that can help solve the problem.

  1. update your BIOS.

  Identification information of the machine [of Smbios 2.7, DMIVersion 39, size = 1390]
  BiosMajorRelease = 4
  BiosMinorRelease = 6
  BiosVendor = FRIEND
  BiosVersion = 8.03
  BiosReleaseDate = 28/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = 23-e010
  Family = 103C_53316J G = D
  SystemVersion = 1.00
  SystemSKU = H3Y95AA #ABA
  BaseBoardManufacturer = PEGATRON CORPORATION
  BaseBoardProduct = 2AF1
  BaseBoardVersion = 1.02
  1: kd >! cpuspeed sysinfo
  CPUID: "Intel (r) Core i5 - 3470 T CPU @ 2.90 GHz"
  MaxSpeed: 2900
  CurrentSpeed: 2893

  BIOS of desktop PC HP Compaq consumer update (SSID 2AF1 ROMA family).
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139899-1&cc=us&DLC=en&LC=en&OS=4132&productOid=5296835&sw_lang=&product=5351314

  Caution:

  BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  2. Update Windows 8.1.

  You have an external VGA video card Multi monitor adapter USB 3.0 to installed? If you do, please make sure that it is installed correctly and working properly.

  If you continue to crash, please run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in case of crash and post a link to the newly generated crash dump here.

  Driver Verifier - stalking a bad driver to behave. Co-written by ZigZag3143 & JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

  Please download a copy of your system information file. Click 'Start', type "msinfo32", click on "file" at the top of the page, select 'export' and give the file a name and click "Save".

  Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• Satellite C660-1ME - sometimes more often hangs when connecting to internet

  Hi, my laptop is Satellite C660-1ME

  It blocks sometimes more often while connecting to the internet, and several times when I m working in eclipse IDE.

  The shot is so that everything is locked, same mouse doesn't have a movement and Ctrl + Alt + Delete does nothing and finally I have to hold the power button until it has adjusted or pull the power cable on.

  Everyone this experience or know where is the problem?

  Hello

  The description of your problem is too general and it is not easy to understand what exactly you do.
  Connection of internet statement is not easy to understand. Who knows what kind of connection use you page your visiting or whatever you usually do.

  Have you noticed this problem on the first day?
  Are you using the original OS that you got with your laptop?

  Where to start our discussion?

• CPD Watchdog Violation BSOD

  I get the BSOD with error Violation of CPD watchdog for a few days now on my computer running Windows 8.  I searched and read a bunch of other posts related to this error, and there seems to be a very broad error message.  Because of what I was doing at the time of accidents, installation of games (WoW & TERA) and streaming video, I thought it might be a updated driver for my wireless card but after updating that and the driver LAN for the mobo, I always get the BSOD.  I posted a link to the file the last crash on skydrive below minidump and my less than system characteristics.

  https://onedrive.live.com/redir?RESID=3454DA7AB1AC9E9C! 200 & authkey =! AEu793dqZGE8jRI&ithint=file%2c.zip

  Motherboard ASUS F2-A85-V Pro

  AMD A6 - 5400K Trinity 3.6 GHz APU

  Corsair Vengeance 16 GB of DDR3 memory

  Intel 330 series Maple Crest 60 GB SSD (boot drive)

  Seagate Barracuda 2 TB HDD

  ASUS PCE - N15 PCI Express Wireless Adapter card

  RS

  This accident was related to driver helper ndisrd.sys NDISRD NT Kernel Resources.  Yours is 2 years and more.  I'd install the most recent driver available, even if it is the same date that your probably became corrupted

  I would also upgrade to win 8.1

  By: 9200.16628.amd64fre.win8_gdr.130531 - 1504

  Error checking 133, {1, 1e0d, 0, 0}

  WARNING: Unable to verify timestamp for ndisrd.sys
  ERROR: Module load completed but symbols can be loaded for ndisrd.sys
  Probably caused by: ndisrd.sys (ndisrd + 2ed9)

  DPC_WATCHDOG_VIOLATION (133)
  The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
  or higher.
  Arguments:
  Arg1: 0000000000000001, the system has cumulatively spent a long period of time to
  DISPATCH_LEVEL or above. The offending component may generally be
  identified with a stack trace.
  Arg2: 0000000000001e0d, the monitoring period.
  Arg3: 0000000000000000
  Arg4: 0000000000000000

  Debugging information:
  ------------------

  DPC_TIMEOUT_TYPE: DPC_QUEUE_EXECUTION_TIMEOUT_EXCEEDED

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: 0 X 133

  Nom_processus: System

  CURRENT_IRQL: d

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff802c0be2fa3 to fffff802c0a63440

  STACK_TEXT:
  fffff880 '054f43a8 fffff802' c0be2fa3: 00000000'00000133 00000000'00000001 00000000' 00001e0d 00000000' 00000000: nt! KeBugCheckEx
  fffff880 '054f43b0 fffff802' c0aa81e1: 00000000'00000002 fffff880 '02-00180 fffff880' 054f4510 fffff780'00000320: nt! : FNODOBFM: 'chain' + 0 x 14600
  fffff880 '054f4430 fffff802' c1177e94: ffffffff 'ffd0a270 fffff802' c11a1902 00000000' 0bbc5261 00000000' 00000000: nt! KeUpdateRunTime + 0 x 51
  fffff880 '054f4460 fffff802' c0a5c73a: 00000000' 0a2b7b48 00000000' 0cbc3cdf fffff802'c11a19a0 00000000' 00000000: hal! HalpTimerClockInterrupt + 0 x 50
  fffff880 '054f4490 fffff802' c0a44310: 00000000'00000000 00000000'00020106 fffffa80'0d9ae200 00000000' 00000000: nt! KiInterruptDispatchNoLockNoEtw + 0x1aa
  fffff880 '054f4620 fffff802' c0ab54e5: 00000000 00000000' fffff880 '054f5c10 fffff880' 054ef000 00000000 00000001': nt! KxWaitForSpinLockAndAcquire + 0x20
  "fffff880 '054f4650 fffff880' 0596aed9: fffffa80 ' 10686840 fffff802 ' c0abb405 00000000'00000000 00000000'00000000: nt! KeAcquireSpinLockRaiseToDpc + 0x35
  fffff880'054f4680 fffffa80'10686840: fffff802'c0abb405 00000000'00000000 00000000'00000000 00000000'00000000: ndisrd + 0x2ed9
  fffff880 '054f4688 fffff802' c0abb405: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 016c5a34: 0xfffffa80'10686840
  fffff880 '054f4690 fffffa80' 0db3c2f0: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
  fffff880 '054f46d0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0xfffffa80'0db3c2f0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  ndisrd + 2ed9
  fffff880'0596aed9?              ???

  SYMBOL_STACK_INDEX: 7

  SYMBOL_NAME: ndisrd + 2ed9

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: ndisrd

  Nom_image: ndisrd.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4fc6df85

  FAILURE_BUCKET_ID: 0x133_ISR_ndisrd + 2ed9

  BUCKET_ID: 0x133_ISR_ndisrd + 2ed9

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x133_isr_ndisrd + 2ed9

  FAILURE_ID_HASH: {c3bcadcd-874f-3407-01b5-a6ff3ab0534a}

  Follow-up: MachineOwner
  ---------

• CPD WATCHDOG VIOLATION WINDOWS 8

  Hello! I have been reading posts on this violation of dog guard, but unlike the others, I have no idea what is causing my laptop (VAIO E series) freeze and restart with "dpc violation of guard dog. I use my laptop primarily for surfing the internet and download torrents. also, I don't know how where and how to register my windows minidump to a temporary location. Thank you!

  Hello

  Check with Sony Support, their online documentation and drivers, diagnostics and ask for their
  Forums about known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ======================

  Check out these resources:

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
  http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

  BBCode: 133 0 x 00000133<-- read="" this="">
  * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate these methods of Windows 8 (there is little real difference):

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =======================================================

  Run checkdisk (chkdsk /f r)

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8 - why isn't Windows find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If the driver verifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Indicator signal a1 Tablet WiFi stopped turning green when connected - good internet connection

  My WiFi signal strength indicator A1 Tablet has just stopped turning green when he has an internet connection and WiFi. I can't find any discussion on a problem like this. The problem appeared after that I did a boot into recovery (hold "volume" while turning on Tablet) to fix a touch screen calibration problem that had developed recently. I guess it is not essential to have the signal strength indicator works perfectly, but it would be nice. Someone at - it experience with this issue?

  If I am not mistaken, this means that your A1 is not synchronized with your Google account.

  Try logging in the game store. That could convince the A1 to connect.

  If the problem persists, you can remove the ' storage "(fait dans les paramètres > apps > tout);"» Calendar, Contacts, and electronic mail. Then restart and re-add your Google account. Who should start your A1 resynchronize.

  Note that everything you have added to the calendar, Contacts, or e-mail that was not synchronized will be gone. But all that has been synchronized with your Gmail account will return once the synchronization is complete.

• Laptop freezes when connected to internet via WiFi

  I use the laptop Dell inspiron 15r, with Windows 7 ultimate on it. Whenever I connect to the internet via WiFi, after a while, most of the programs I use freezes, and the internet connection is cut off. The same control panel functions do not occur. Also is not possible the normal closing, and I have to force close down at length by pressing the power button. This situation arises that if I use the WiFi. When I use a LAN cable, no problem. This situation is quite irritating, like many times I have no other choice than to use a wi - fi connection and whenever I use it after a few minutes, I have to restart with force, and the cycle repeats. Please suggest a solution. Thank you.

  Hello Brad,

  I tried the thing of diagnosis, but could not get anything out of it. The problem is now solved because I updated the drivers of network on the Dell site, but currently I am confronted with some problems, that I used to.

  Thank you much for the help.

  Kind regards

  Sunil.

• My Acrobat XI freezes when connected to internet

  Hi all

  A week ago, my Acrobat XI started freezing when it suffice to read PDF files.  After that multiple charging & re - installs, I discovered that freezing only happens when I am connected to the internet.  If I disable my internet connection, I have no problem at all.

  What can I do to fix this?  I have used several versions of Acrobat for the past 14 years, and this is the first time that has happened.

  I appreciate any help that can be provided.

  -Alex

  Hi all

  I found my solution.  I remembered that I am registered in "Adobe Online Services".  That's the problem.  Once I signed out of it, my problem went away.  I have no idea what is wrong with this option, but it was true nearby causing Adobe to lose a customer long term.  I seriously doubt that they care little ole me, but it would have been for a stupid reason.

  -Alex

• Get an error "unable to locate component: this application has not start becauseATL100.DLL is not found" when connecting to internet

  * Original title: ATL100. DLL PROBLEM

  Please help me I am disabled and do not know much about computers. I just tried to connect to the Internet and there was a connection problem. The message came from mcagent.exe impossible to locate the component: this application has not start becauseATL100.DLL was not found. Reinstalling the application may fix this problem. I have no Internet and I don't know much about computers. I need my pc to take care of me, it's my connection to the world. Please help me. I also continues to receive a message from McAfee that my computer is in danger (real-time scanning is disabled)

  Delete all McAfee software! Then it will not work! Then reinstall the McAfee software. I had exactly the same problem: during the process of removement, I have immediate internet access... Good luck!

• programming to choose the access point already defined when connecting to internet

  Is that possible a list of access point on the device and choose one of the people to make internet connections?

  There is only one APN defined on the device.  It will be selected if you use '; deviceside = true' without APN settings (assuming that your device is not default to WAP as some do).

  If you have a list, you can try these - see this article for more information:

  http://supportforums.BlackBerry.com/T5/Java-development/specify-APN-information-for-a-direct-TCP-con...

  There are other Threads to discuss related issues, try the APN in the search box for more information.

• Get a weak signal when connecting to internet

  * Original title: my problem is that my computer will have 3 bars of connection while my girlfriend in the same room will have full signal and I have no idea what the question is can someone

  I tried reseting my adapter and update the driver still no help

  Hello

  1. are you using the cable or wireless Internet connection?

  2. do you have a router connected to a computer?

  Please refer to the links and check if it helps.

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

  Troubleshoot low wireless signal quality (applies to Windows 7 as well)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Windows 8 - repeated screens CPD Watchdog Violation blue

  Separated from this thread.

  Hello

  I have the same problem also when I use MSI afterburner windows crash and displays the DPC_WATCHDOG_VIOLATION message.

  Can u please help me

  THX

  Hello

  Well check with MSI Support, their drivers and documentation online and ask in their forums
  on the known issues and solutions. Obviously you shouldn't use MSI Afterburner if she is originally
  blue screen problems, the cause is obvious.

  Support MSI
  http://www.msi.com/index.php?func=service

  MSI - Downloads (drivers and BIOS)
  http://www.msi.com/index.php?func=downloadindex

  MSI - Forums
  http://Forum-en.msi.com/

  MSI - Service
  http://us.msi.com/index.php?func=service

  MSI - Live Update online
  http://www.msi.com/index.php?func=downloadindex

  MSI - Contacts - USA - North America value
  http://www.msi.com/index.php?func=HTML&name=aboutus

  ===============

  Check out these resources: the real solution will probably come from MSI.

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
  http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

  BBCode: 133 0 x 00000133<-- read="" this="">
  * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1
  
  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =======================================================

  Run checkdisk (chkdsk /f r)

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8 and 8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC (Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a USB Flash Drive recovery or other methods:

  How to create a recovery USB in Windows 8 & 8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  ----------------------------------------------------------------------------------------

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If the driver verifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CPD Watchdog Violation on my Toshiba Satellite and impossible to verify updates

  I had Violation Watchdog DPC on my Toshiba Satellite. It's frustrating to worm. How can I solve this problem?

  Here's my minidumps files https://skydrive.live.com/redir?resid=67BCFC4F8EC6B99B 107

  Hi Sheikh R,.

  You seem to have two software antivirus/firewall in real-time installed, Norton and Avira which can cause stability problems.

  Can you uninstall Norton and Avira and see if that helps.

  For security software consider using just firewall and antivirus integrated Windows 8 (Windows Defender).

  I would also uninstall the c:\windows\system32\drivers\sptd.sys pilot who has been known to cause blue screen errors in some configurations.

  Uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it's Daemon Tools or Alcohol 120%.

  Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

  http://www.duplexsecure.com/en/FAQ

• The incessant CPD Watchdog Violation?

  I have a Lenovo laptop, G780, and recently, I was not able to connect to all without any BSOD. This causes my laptop restart and he ends up in a reboot loop after a reboot. The only way for to connect me with success is to do a system restore

  * The problem started to occur just after I downloaded DC Universe. I uninstalled since, but am still stuck with this problem.

  You have done, thank you!

  The two attached DMP files are bug control DPC_WATCHDOG_VIOLATION (133) .

  This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above.

  Usually the processes accompanying the accident are not relevant in most cases, but according to what they are and their level of impact on the system, they may very well be. In your case, the crash of a process is important and it is compliant: nom_processus: avgnsa.exe

  ^^ EXE from moy.

  Remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  Kind regards

  Patrick